Code CR900FD Handleiding
Code
Barcode lezer
CR900FD
Lees hieronder de 📖 handleiding in het Nederlandse voor Code CR900FD (2 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 115 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Using the CR900FD in a Universal Stand
The CR900FD has a stand detecon feature. By
default, when the CR900FD is placed in the stand,
the reader will automacally enter into moon
detecon mode. When in this mode, simply place
a bar code in the scan eld to acvate the reader.
The CR900FD will beep and ash a green LED to
indicate a ‘good read’ has occurred.
When the CR900FD is removed from the stand,
the reader switches to manual mode and the
trigger must be pressed to read a bar code.
Press and hold the CR900FD trigger, the two
blue bars eming from the reader are used for
targeng. Center the blue bars in the middle of
a bar code.
The opmal reading distance from reader to bar
code is approximately 4.0” (10 cm).
For USB Cable: plug the USB end of the Anity® cable into a USB port on the host device.
Aer several seconds, the reader will beep twice and the LED will turn o to indicate the
CR900FD is ready for use.
For RS232 Cable: plug the power supply into the AC outlet, plug the power supply cord into
the barrel jack of the cable, and connect the RS232 connector to the appropriate serial port
on the host device. Aer several seconds, the reader will beep twice and the LED will turn o
to indicate the CR1400 is ready for use.
Using the CR900FD Out of a Universal Stand
Powering on the CR900FD CR900FD Default Sengs
UPC/EAN/JAN
Code 39
Code 93
The CR900FD, out of the box, will read the following 1D bar codes:
The CR900FD can be upgraded to read 2D bar codes with the purchase of a license key. 2D
license keys can be purchased individually or as a package. Available licenses:
Conguraon Codes
Once the reader is at the opmal distance, the CR900FD will read the bar code (when the
trigger is pressed). The CR900FD will beep and ash a green LED to indicate a ‘good read’ has
occurred.
2 3
Code 128
Interleaved 2 of 5
Codabar
GS1 DataBar (RSS)
PDF417
Data Matrix
QR Code
Aztec Code
All 2D bar codes
Visit www.codecorp.com for upgrading/license key informaon.
Upgrade Opons
Note: a CR900FD will read Data Matrix conguraon codes.
The CR900FD can be quickly, and easily congured to meet the needs of dierent use cases.
A common conguraon is reading bar codes found on cell phone screens. To enable, or
disable, cell phone reading mode, scan the appropriate code below.
For more conguraon opons refer to the CR900FD Conguraon Guide located at
www.codecorp.com. For custom conguraon opons, please contact us at
support@codecorp.com.
Enable Cell Phone Reading Mode Disable Cell Phone Reading Mode
Quickstart Guide
C007258_02_CR900FD_Quickstart_Guide
Code Reader™ 900FD (CR900FD)
USB Anity® Cable RS232 Anity® Cable
w/ Power Supply
Aaching/Detaching a Cable
To aach a cable, plug the RJ-50 end of the Anity® cable into boom of the reader (Figure
1). Firmly push the connector into the reader unl a snap can be heard, to indicate the cable
is properly aached. To detach a cable, press a paper clip into the hole on the back of the
CR900FD (Figure 2), and gently pull the cable from the reader.
Figure 2Figure 1
Included with your CR900FD
Depending on the kit ordered, the following may have been shipped with your reader:
Universal Stand
Universal Stand Assembly (included when ordered as a Kit/Package)
Cleaning a CR900FD
The following agents are approved to clean a Code bar code reader:
1) Alcohol Wipes
2) CaviWipes® Disinfecng Towelees
3) Clorox® Disinfecng Wipes
4) Clorox® Bleach Soluon (10% Clorox bleach, 90% tap water)
5) Medical DiAirKem
6) Sani-Cloth® HB, Super Sani-Cloth® Germicidal, Sani-Cloth® Plus Germicidal Disposable Wipes
7) Virex® II Disinfectant Cleaner
Warranty
Code’s CR900FD carries a ve year standard warranty. Universal Stands follow the warranty
of the reader, and cables have a 90 day warranty period. For more warranty informaon,
please refer to the www.codecorp.com.
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com (801) 495-2200
© 2012. Code Corporaon. All Rights Reserved. 4
Product specificaties
| Merk: | Code |
| Categorie: | Barcode lezer |
| Model: | CR900FD |
Heb je hulp nodig?
Als je hulp nodig hebt met Code CR900FD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Barcode lezer Code
16 April 2024
16 April 2024
Handleiding Barcode lezer
- Barcode lezer Casio
- Barcode lezer Garmin
- Barcode lezer Honeywell
- Barcode lezer Motorola
- Barcode lezer Bluebird
- Barcode lezer Datalogic
- Barcode lezer DeLock
- Barcode lezer Digitus
- Barcode lezer ID-Tech
- Barcode lezer Intermec
- Barcode lezer Konig
- Barcode lezer Manhattan
- Barcode lezer Nedis
- Barcode lezer Palm
- Barcode lezer Renkforce
- Barcode lezer Zebra
- Barcode lezer Olympia
- Barcode lezer Trimble
- Barcode lezer Steren
- Barcode lezer Argox
- Barcode lezer CipherLab
- Barcode lezer Metapace
- Barcode lezer Hamlet
- Barcode lezer Adesso
- Barcode lezer Deltaco
- Barcode lezer Nilox
- Barcode lezer Approx
- Barcode lezer Brady
- Barcode lezer GoDEX
- Barcode lezer EC Line
- Barcode lezer ELO
- Barcode lezer IFM
- Barcode lezer IC Intracom
- Barcode lezer POSline
- Barcode lezer Newland
- Barcode lezer Posiflex
- Barcode lezer Baracoda
- Barcode lezer Datamax-O'neil
- Barcode lezer Cypress
- Barcode lezer DENSO
- Barcode lezer Socket Mobile
- Barcode lezer QUIO
- Barcode lezer Tecno
- Barcode lezer ZBA
- Barcode lezer Code Corporation
- Barcode lezer Qoltec
- Barcode lezer Wasp
- Barcode lezer Vultech
- Barcode lezer Mach Power
- Barcode lezer Psion
- Barcode lezer Koamtac
- Barcode lezer Unitech
- Barcode lezer Opticon
- Barcode lezer Atlantis Land
- Barcode lezer Qian
Nieuwste handleidingen voor Barcode lezer
16 November 2024
16 November 2024
6 September 2024
5 September 2024
18 Augustus 2024
17 Augustus 2024
31 Juli 2024
29 Juli 2024
29 Juli 2024
29 Juli 2024