Code Corporation Code Reader 2.0 Handleiding
Code Corporation
Barcode lezer
Code Reader 2.0
Lees hieronder de 📖 handleiding in het Nederlandse voor Code Corporation Code Reader 2.0 (67 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/67
C001537_18_CR2_User_Manual 1
Save Settings
Manual Version 18
This version of the manual released with rmware version 4058. 3/24/09Release Date:
User Manual
Code Reader 2.0™
C001537_18_CR2_User Manual
C001537_18_CR2_User_Manual i
Save Settings
Statement of Agency Compliance
The CR2 can be set to use targeting lasers. The CR2’s targeting laser emits Class 2M
radiation outside of the product per IEC 60825-1. Class 2M Laser/LED product. Do not stare into beam or view directly
with optical instruments.
The CR2 has been tested by an independent electromagnetic compatibility laboratory in accordance with the applicable
specications and instructions.
The CR2 has been tested for compliance with FCC regulations and was found to be compliant with all
applicable FCC Rules and Regulations.
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this device must not be
co-located or operate in conjunction with any other antenna or transmitter.
CAUTION: Changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
The CR2 has been tested for compliance to CE standards and guidelines and was found to conform to
applicable CE standards, specically the EMC requirements EN 55024, ESD EN 61000-4-2, Radiated RF
Immunity EN 61000-4-3, ENV 50204, EFT EN 61000-4-4, Conducted RF Immunity EN 61000-4-6, EN
55022, Class B Radiated Emissions, and Class B Conducted Emissions.
Laser/LED Radiation
Wavelength: <1mW
Maximum Output: 650-700 nm
Laser Pulse Duration: 0.977 mSec.
LED Pulse Duration: 0.255 uSec.
A Warning Label (see left) is located on the underside of the CR2 near
the battery locking mechanism as pictured (see right).
Code voids product warranty if the hard case has been opened or tampered with
in any way. Opening the case may put the user at risk of laser radiation exposure
(Class 3R). A second Warning Label (see left) is placed within the casing struc-
ture as pictured (see right).
Caution – Use of controls or adjustments, or performance of procedures other
than those specied herein may result in hazardous radiation exposure.
In addition, a CB Test Certicate has been issued by the National Certication
Board (NCB) indicating Code Reader 2.0 (CR2) meets all safety and quality stan-
dards in accordance to IEC 60950-1:2001, First Edition.
Enlarged for
readability
Enlarged for
readability
Laser aperature
37AW
E300884
CAUTION - CLASS 3R
LASER RADIATION
WHEN OPEN
AVOID DIRECT EYE
EXPOSURE
C001537_18_CR2_User_Manual ii
Save Settings
Code Reader 2.0 User Manual
Copyright © 2006 Code Corporation.
All Rights Reserved.
The software described in this manual may only be used in accordance with the terms of its license agreement.
No part of this publication may be reproduced in any form or by any means without written permission from Code
Corporation. This includes electronic or mechanical means such as photocopying or recording in information storage and
retrieval systems.
NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does not represent a
commitment on the part of Code Corporation. Code Corporation does not warrant that it is accurate, complete or error
free. Any use of the technical documentation is at the risk of the user. Code Corporation reserves the right to make
changes in specications and other information contained in this document without prior notice, and the reader should in
all cases consult Code Corporation to determine whether any such changes have been made. Code Corporation shall
not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material. Code Corporation does not assume any product liability
arising out of or in connection with the application or use of any product or application described herein.
NO LICENSE. No license is granted, either by implication, estoppel, or otherwise under any intellectual property rights
of Code Corporation. Any use of hardware, software and/or technology of Code Corporation is governed by its own
agreement.
The following are trademarks or registered trademarks of Code Corporation:
CodeXML, Maker, QuickMaker, CodeXML Maker, CodeXML Maker Pro, CodeXML Router, CodeXML Client SDK,
CodeXML Filter, HyperPage, CodeTrack, GoCard, GoWeb, ShortCode, GoCode, Code Router, QuickConnect Codes
All other product names mentioned in this manual may be trademarks of their respective companies and are hereby
acknowledged.
The software and/or products of Code Corporation include inventions that are patented or that are the subject of patents
pending. U.S. Patents: 6997387, 6957769, 7428981, 6619547, 6736320, 7392933, 7014113, 7240831, 7353999,
7519239, 7204417, 6942152, 7036735, 7070091, 7097099, 7621453
The Code Reader software uses the Mozilla SpiderMonkey JavaScript engine, which is distributed under the terms of the
Mozilla Public License Version 1.1. Source code for this version of Spider Monkey is available at:
http://www.codecorp.com/source/spidermonkey.
The Code Reader software is based in part on the work of the Independent JPEG Group.
Code Corporation, 14940 S. Pony Express Road, Suite 500, Bluffdale, UT 84065
www.codecorp.com
Product specificaties
Merk: | Code Corporation |
Categorie: | Barcode lezer |
Model: | Code Reader 2.0 |
Kleur van het product: | Zwart |
Gewicht: | 71.5 g |
Breedte: | 46 mm |
Diepte: | 109 mm |
Hoogte: | 33 mm |
Bluetooth: | Ja |
GPS: | Nee |
Schokbestendig: | Nee |
Certificering: | CE, FCC, RoHS |
Aantal toetsen: | 2 toetsen |
Type beeldsensor: | CMOS |
Temperatuur bij opslag: | -20 - 65 °C |
Maximumbereik: | 0.228 m |
Golflengte: | 650 nm |
Stroomverbruik: | 350 mA |
Max. scangebied: | 67 x 305 mm |
Maximale afstand: | 10 m |
Bedrijfstemperatuur (T-T): | 0 - 50 °C |
Relatieve vochtigheid in bedrijf (V-V): | 5 - 95 procent |
Pitch lees-hoek: | -60 - 60 ° |
Yaw lees-hoek: | -60 - 60 ° |
Tilt lees-hoek: | -180 - 180 ° |
Optische sensorresolutie: | 1024 Pixels |
Heb je hulp nodig?
Als je hulp nodig hebt met Code Corporation Code Reader 2.0 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Barcode lezer Code Corporation
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
Handleiding Barcode lezer
- Barcode lezer Casio
- Barcode lezer Garmin
- Barcode lezer Honeywell
- Barcode lezer Motorola
- Barcode lezer Bluebird
- Barcode lezer Datalogic
- Barcode lezer DeLock
- Barcode lezer Digitus
- Barcode lezer ID-Tech
- Barcode lezer Intermec
- Barcode lezer Konig
- Barcode lezer Manhattan
- Barcode lezer Nedis
- Barcode lezer Palm
- Barcode lezer Renkforce
- Barcode lezer Zebra
- Barcode lezer Olympia
- Barcode lezer Trimble
- Barcode lezer Steren
- Barcode lezer Argox
- Barcode lezer CipherLab
- Barcode lezer Metapace
- Barcode lezer Hamlet
- Barcode lezer Adesso
- Barcode lezer Deltaco
- Barcode lezer Nilox
- Barcode lezer Approx
- Barcode lezer Brady
- Barcode lezer GoDEX
- Barcode lezer EC Line
- Barcode lezer ELO
- Barcode lezer IFM
- Barcode lezer IC Intracom
- Barcode lezer POSline
- Barcode lezer Newland
- Barcode lezer Posiflex
- Barcode lezer Baracoda
- Barcode lezer Datamax-O'neil
- Barcode lezer Cypress
- Barcode lezer DENSO
- Barcode lezer Socket Mobile
- Barcode lezer QUIO
- Barcode lezer Tecno
- Barcode lezer ZBA
- Barcode lezer Qoltec
- Barcode lezer Wasp
- Barcode lezer Vultech
- Barcode lezer Mach Power
- Barcode lezer Psion
- Barcode lezer Koamtac
- Barcode lezer Unitech
- Barcode lezer Opticon
- Barcode lezer Atlantis Land
- Barcode lezer Code
- Barcode lezer Qian
Nieuwste handleidingen voor Barcode lezer
5 December 2024
23 November 2024
16 November 2024
16 November 2024
6 September 2024
5 September 2024
18 Augustus 2024
17 Augustus 2024
31 Juli 2024
29 Juli 2024