Coby CX-CD248 Handleiding

Coby CD-spelers/recorder CX-CD248

Lees hieronder de 📖 handleiding in het Nederlandse voor Coby CX-CD248 (2 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Please read instruction manual before use.

Portable AM/FM Radio, Cassette Recorder and CD Player

MODEL NO: CX-CD248

COBY INTRODUCTION

Please read and follow the instruction manual carefully be-

fore operating in order to avoid any damage to the unit.

1.By using AC power

Insert one end of the AC power cord into the AC socket

on the rear of the unit and the other end into a standard

wall socket.

POWER SUPPLY

2 By using batteries.

Insert 8x"D"size batteries (not included) in the battery

compartment in the back of the unit by matching the

polarities.

The unit will not operate on battery power when

the AC power cord is plugged into the AC socket.

Replace batteries when the power indicator dims,

the volume decreases or the sound distorts.

Use batteries of high quality and check them

regularly. Alkaline batteries are recommended.

Do not mix new batteries with old or used batteries.

Use only batteries of the same brand and type

Batteries should not be left in the unit if they

are exhausted or if the unit is not to be used

for a long period of time as they may leak and

damage the unit. Battery leakage is not covered

under the warranty.

IMPORTANT SAFEGUARDS

Always operate the product from a power supply

of the same voltage, frequency and rating as indicated

on the product identiﬁcation plate.

Do not operate product with a damaged cord or plug.

Never install the unit where there are heat sources such

as radiators, heat registers, stoves, direct sunlight,

excessive dust or where there is mechanical vibration

or shock. Switch off and unplug from AC outlet when not

in use.

CONCERNING COMPACT DISCS

Only compact discs identiﬁed with this

mark can be used with this player.

IMPORTANT

The CD mechanism and the sensitive circuitry may

cause interference to a radio tuner nearby. Do not

operate this unit while operating other radio devices.

Danger This product utilizes invisible laser

radiation. Avoid direct exposure

to the beam.

Caution Use of controls, adjustments or procedures

not listed in this manual may result in hazardous

radiation exposure.

CARE and MAINTENANCE

Handle your unit with care to extend the life of the unit.

Use a soft and clean cloth damped with plain lukewarm water

to clean the exterior of the unit.

Never use solvents such as benzene or other strong chemical

cleaners since these could damage your unit.

It is important that no liquid reaches the inside of the unit.

Do not touch the CD laser part or look directly at it.

LOCATION OF CONTROLS

6.CD Compartment

1.Volume Control

2.Function Selector

3.CD Display

4.CD Operation Buttons

5.Cassette Compartment

7.Band Selector

8.Tuning Control

9.Cassette Operation Buttons

10.CD Compartment Open/Close Button

11.Tuning Indicator Window

12.Telescopic Antenna

8 1076

CD OPERATION

Set the FUNCTION Selector to the CD position and insert a CD.

1. Press PLAY/PAUSE button to play.

2. Press PLAY/PAUSE button to pause while in play mode.

3. Press PLAY/PAUSE button once more to resume play.

4. Press STOP to stop play.

5. Always press STOP and wait for complete stop to remove CD

from CD player.

Play/Stop/Pause Mode

1. Slide the Function Selector switch to radio.

2. Select the desired AM or FM with the band switch.

3. Tune the desired station by turning the Tuning Control.

4. Adjust the volume with Volume Control as desired.

5. Extend Telescopic Antenna and adjust the direction and angle

to obtain the optimum reception.

6. Set the Function Switch to Tape for power standby mode.

RADIO OPERATION

You can use headphones with 3.5mm diameter stereo plug and

have impedance of 32ohms. When the headphones are con-

nected, the speakers are disconnected automatically.

Set the VOLUME to a low level before using headphones and

gradually adjust the Volume Control to the comfortable listening

level.

Do not play the VOLUME too loud for extended periods of time

to avoid any damage your hearing.

HEADPHONES (Not included)

1. Press Repeat button once to repeat current track only,

the indicator is lighting and keeping on. twice to repeat

all tracks, the indicator is ﬂashing.

2. Press Repeat button twice to cancel repeat current track.

Or once to cancel repeat all tracks.

Repeat Mode Tracking Mode

1. To go back to beginning of current track, press once.

2. To go back to previous tracks, press repeatedly.

3. To go to next track, press once or repeatedly to play

your desired track.

We recommend that you use only type1 (Normal Bias)

cassette tape with your tape player.

CASSETTE TAPE OPERATION

1. Set the FUNCTION Selector to the TAPE (OFF) position.

2. Press STOP/EJECT to open the tape deck door. Insert

a tape and close the door.

3. Press PLAY to start play, the tape will stop automatically

at the end.

4. Press to rewind or press to fast forward tape.

This unit is equipped with ALC (Automatic Level control) cir-

cuitry that automatically sets the recording to the optimum level.

Adjusting the VOLUME control does not eﬀect the recording.

RECORDING FROM RADIO/CD

Recording from Radio

1.Set the FUNCTION Selector to the RADIO position.

2.Set the BAND Selector to AM or FM.

3.Turn the TUNING Dial to tune in a radio station.

4.Open the cassette deck door and insert the blank tape.

5.Press PAUSE, then press RECORD, the PLAY key is automati-

cally engaged with RECORD button.

6.Release the PAUSE button to begin recording. You can use the

PAUSE button to edit any unwanted commercials or programs

during your recording.

7.Recording will stop automatically at the end of the tape or

press STOP to end the recording manually.

Recording from CD

1.Set the FUNCTION selector to the CD position.

2.Insert a CD.

3.Open the cassette deck door and insert the blank tape.

4.Press RECORD and the PLAY key is automatically engaged.

5.Press the PLAY/PAUSE button on the CD player, the Play/Pause

indicator will illuminate.

6.Press the STOP button to manually end recording or it will stop

automatically at the end of recording.

SPECIFICATIONS

Power Sourc : AC 110/220V 50/60Hz 10W DC 12V

5. Press STOP/EJECT to stop play.

6. Press STOP/EJECT one more time to open the cassette

door and take the tape out.

7. Adjust the sound with the VOLUME control.

To program:

(1) Press REPEAT button at stop mode,”REPEAT”

indicatorlight will ﬂash, the serial number for

programming frozen at the same time.

(2) Press FF (orREW )button to select the track

number.

(3) When desired track is displayed, press REPEAT

button to conﬁrm.

(4) Repeat (2)~(3) to set up 16 tracks. The display

will show the current set track.

(5) Set tracks can be reviewed by pressing REPEAT

button.

(6)

Program Function

To complete the programming and to play,

press PLAY/PAUSE button to start the

programmed tracks.

(5) To clear the programming, press STOP( )

button.

(REPEAT function will change

into PROGRAM function at stop mode)

We recommend that the unit be powered by AC (house current)

when recording since this function uses the most power. We re-

commend that you use Type 1 (normal bias) cassette tapes only.

Note: After setting up to 10 tracks(P0-P9), the letters

"a-b-c-d-e-f"(Pa-Pf) will replace the digits "11-12-13-14

-15-16", because the LCD can only display

two digits at most.

Product specificaties

Merk:	Coby
Categorie:	CD-spelers/recorder
Model:	CX-CD248
Kleur van het product:	Zilver
Type aansluitplug:	3,5 mm
Ingebouwde luidsprekers:	Ja
Ondersteund aantal accu's/batterijen:	8
Soort antenne:	Telescopisch
Soort apparaat:	Draagbare cd-speler
Laadmechanisme:	Bovenkant
Cassette deck:	Ja
Afmetingen (B x D x H):	373.8 x 172.9 x 195 mm
CD-R afspelen:	Ja
Type beeldscherm:	LCD
Type batterij:	D
Bandrecorder:	Ja