Cobra DUALPRO 360° Handleiding

Cobra Navigator DUALPRO 360°

Lees hieronder de 📖 handleiding in het Nederlandse voor Cobra DUALPRO 360° (2 pagina's) in de categorie Navigator. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Contact Us
11
Menu
Cobra Electronics Corporation
6500 W. Cortland St., Chicago, IL 60707
Cobra One Year Limited Warranty
What this warranty covers: Cobra USA, Inc. (Cobra”) warrants your
Product against all defects in materials and workmanship.
For how long: One (1) year from the date of original purchase from an
authorized Cobra dealer.
What we will do: If a breach of warranty occurs, Cobra, at its discretion,
will either repair or replace your Product free of charge.
What we will not do: Cobra will not pay shipping charges that you incur
for sending your Product to us.
What you must do to maintain this warranty: Show original proof of
purchase or receipt from an authorized Cobra dealer.
Warranty exclusions: This warranty does not apply to your product
under any of the following conditions: 1. The serial number has been
removed or modied. 2. Your product has been subjected to misuse
or damage (including water damage, physical abuse, and/or improper
installation). 3. Your product has been modified in any way. 4. Your
receipt or proof-of-purchase is from a non-authorized dealer or internet
auction site, including E-bay, U-bid, or other non-authorized resellers.
5. You are not the original purchaser of the Product from an authorized
dealer or did not receive it as a gift from the original purchaser of the
Product from an authorized dealer.
To obtain service: 1. Contact Cobra (1-800-964-3138) to obtain a Return
Authorization Number. 2. Properly pack your Product and include: your
name, complete return address, written description of the problem with
your Product, daytime telephone number, and a copy of the original
proof of purchase or receipt. 3. Label the outside of the package clearly
with your Return Authorization Number. Ship the Product pre-paid
(insured, for your protection) to: Cobra Electronics Corp., 6500 W.
Cortland St., Chicago, IL 60707.
LIMITATION OF WARRANTY: The obligations set forth above are
Cobrasole obligations and your exclusive remedy. Cobra makes no
other express warranty. Any implied warranty of merchantability or
tness for a particular purpose that may be applicable to the Product
is limited in duration to the duration of this warranty. Some States do
not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you. Cobra SHALL NOT BE LIABLE
FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING,
WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR
MOUNTING OF THE PRODUCT. Some States do not allow the exclusion
or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. Cobra is not responsible
for products lost in shipment between the owner and our service center.
Other legal rights: This warranty gives you specic legal rights, and you
may also have other rights which vary from State to State.
©2019 Cobra®, iRadar®, and SmartShield® are trademarks of Cobra USA, Inc..
Manufactured in the Philippines. Features, specications and prices subject to
change without notice.
FCC NOTE: Modications not expressly approved by the manufacturer could
void the user’s FCC granted authority to operate the equipment.
FCC ID: QL4M6. CONTAINS FCC ID:QKLBT2
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received including interference that
may cause undesired operation.
800.964.3138 Cobra.com
Software Updates
Dual Pro 360s red light and speed camera
database is easily updated using our exclusive
detector software tools found on our web site.
Firmware, or the operating software for the
detector, can also be updated using these tools.
In order to have access to these updates, you must
register your Dual Pro 360 at www.Cobra.com.
Once registered, you will receive email
notications that updates are now available for
your database or rmware. To handle your
software and DEFENDER updates you need to
connect your Dual Pro 360 to a computer rst.
You can connect Dual Pro 360 to a computer via
USB/USB Mini B cable.
Restore Factory Settings
To restore Dual Pro 360 to it’s original factory
settings, press and hold MRK and BRT while
turning the power on. A message will Restored
display, acknowledging the reset.
Notes for Programming
To view serial number and software revision press
MRK and MUTE while powering on detector.
AutoPower O Power turns on or odepending on your vehicles ignition
type (constant power or switched)
1 Hour Powers oautomatically after 1 hour
2 Hours Powers o automatically after 2 hours
4 Hours* Powers o automatically after 4 hours
8 Hour Powers oautomatically after 8 hours
NOTE: If AutoPower is on, the display screen goes blank after
30 minutes to save screen life. Display screen will turn on
automatically after you reach 10 MPH
Band Enables Default Settings for North AmericaDefault*
Modied Customize the bands you want to monitor
Press SEN to go from one Press VOLUME + or to change
band category to the next your setting within a category
X Band On* / O
K Band On* / O
Ka Band On* / O
Ka-POP On / O*
Laser On* / O
TSR On* / O Automatically rejects trac ow sensors-monitoring false alarms
Marker Enable Other, Red Light Camera, Red and Speed Camera, and On* / O
Speed Trap
Modied Customize the types of locations you want to mark for
future reference
Press SEN to go from one Press VOLUME + or – to change
marker category to the next your setting within a category
Other On* / O Other location
Redlight On* / O Red light camera
Red & Speed Red light & speed cameraOn* / O
Speed Cam Speed cameraOn* / O
Speed Trap On* / O Speed trap
Air Patrol Known aircraft patroled areas On / O*
NOTE: User cannot mark an Air Patrol location
Clear Locations Clear all user Marked locations. Press SEN button to conrm Marked
Lockouts Clear all lockouts. Press SEN button to conrm
Defender Clear all DEFENDER data. Press SEN button to conrm
Format Clear DEFENDER database, all markers, and all lockouts.
Press SEN button to conrm
*Default Setting
Press BRT to go from Press VOLUME + or to change
one category to the next your setting within a category
User Mode Access and customize all Settings and Preferences Advanced*
Novice Access and customize units and display color, (all other
Settings are set to factory defaults)
NOTE: Switch back to Advance mode to view all Preferences
Pilot Scan Bar* Scanning Bar with Full Word
Full Word Full Word: AutoScan, Auto NoX, or Highway
Display Color Set color to match your vehicles dash displayCopper/Blue*/Green/Red
Speed Display Displays current speedOn*
O Displays battery voltage
Speed Mute Oers double beep alert tones below specied speedO/ 20-160 mph
20 mph*
Speed Alert Reminds you when you exceed a specied speedO / 20-160 mph
70 mph*
Meter Mode Single band with bar graph of signal strengthStandard*
Frequency Single band with numeric frequency
Threat Multiple bands with bar graph of signal strengths
Basic Simple messages replace bands:
Caution (if traveling below cruise alert limit)
Slow Down (if traveling above cruise alert limit)
Tones Standard* Standard Cobra alert tones
Mild Mild doorbell chime alert tones
AutoMute On* / O Automatically reduces audio during alert
AutoLock On* / O Automatically stores and locks out false alarms
Units English*/Metric Units for distance and speed
Language English*/Espanol Language for voice and text
Voice On* / O Voice announcements
GPS Filter Enables GPS-powered featuresOn* / O
Press and hold the BRT and SEN buttons to access the Menu. To exit the Menu, simply wait a few seconds
without pressing a button. The unit will display to conrm your selections.Completed NOTE:
AutoPower only
works with constant
power ignition
Quick Reference
7 8
OWNERS MANUAL
Settings
9
SEN - Sensitivity Modes
Press SEN to adjust the X and K band radar detection
sensitivity/range. Auto = speed adjusted. The slower
you travel, the shorter the X and K band detection
range. At 50 mph and above, X and K detection
range is at maximum. Ka band detection range is
always at maximum, regradless of the SEN setting.
- Auto No X
Auto No X works the same as Auto mode;
however, X band is completely turned o.
- Auto Lo K
Auto Lo K works the same as Auto mode;
however K band sensitivity is lowered.
- Highway
In this setting, Dual Pro 360 will detect all radar
signals on all bands at maximum range.
Meter Mode
Dual Pro 360 oers three settings for displaying
alerts:
Standard
The Standard option provides information on a
single radar signal. When Dual Pro 360 detects
radar, it displays the band of the radar (X, K and Ka),
a bar graph of the front and rear signal strength
(front is the left-most bar graph), along with front or
rear arrow. When laser is detected, the display will
simply read “Laser. If there are multiple signals
present, Dual Pro 360 will determine which one is
the most important threat to display.
Frequency mode is the same as Standard but adds
frequency information on the displayed radar signal.
Basic
Basic messages replace band and signal strengths.
“Caution” is used when as alert is received while you
are traveling below your current Speed Mute setting
(or posted speed limit for current location, when
connected to iRadar).
“Slow Down” is displayed when an alert is recived
while you are traveling above thge current Speed
Mute setting (or posted speed limit for the current
location, when connected to iRadar).
Speed Mute
The Speed Mute feature allows you to modify your
alert tones when traveling below a specied speed
(factory default is 20 mph; see Settings and
Preferences for details). For all alerts received while
traveling below the specied speed, Dual Pro 360
will sound a simple double-beep alert.
Band Front Arrow
Rear Arrow
Front Signal
Strength
Rear Signal
Strength
GPS Filter/Locking Out False Alerts
Dual Pro 360 is equipped with a TrueLock GPS Filter
to lock out and store in its memory false alerts. To
lock out a false alert (X band, K band or laser only),
press the MUTE button on the detector or the
SmartCord three times durring an alert. Pressing the
rst time will silence the audio. Pressing a second
time will generate a prompt on the display that will
read “Lockout?” Press a third time to conrm you
want to lock this signal out by location and
frequency. A “Stored” message will be displayed.
Once a signal has been stored, Dual Pro 360 will
reject the signal the next time you approach this
area and will display the locked out alert. To unlock a
signal that has already been stored, simply press and
hold the detector or SmartCord MUTE button while
receiving the locked out alert.
The display will read “Unlock?” press and hold the
detector or SmartCord MUTE button again to unlock
it from memory. The display will then read
“Unlocked” to conrm your action. For details on
how to turn the GPSlter o, refer to the Settings
and Preferences section.
NOTE: When the GPS lter is set to OFF, you do not have
access to Dual Pro 360’s other GPS-enabled features
(e.g., Database alerts, marking locations, etc).
Speed Alert
With Dual Pro 360, you can set the Speed Alert to
notify you when you are traveling over a specied
speed (factory default is 70 mph; see Settings and
Preference for details). When you travel above the
speed threshold you have set, the background
display for your current speed will turn red to alert
you that you have exceeded the specied speed.
AutoLearn
The AutoLearn feature analyzes (over time) the
source of radar signals by location and frequency.
This allows Dual Pro 360 to determine if a signal is a
real threat or a false one. If it determines that the
signal is an automatic door opener, motion sensor,
etc., it automatically locks out this source at this
particular location. A “Stored” message will appear
on the display when a signal has been automatically
locked out. If you prefer, you can turn the AutoLearn
feature o. See the Settings and Preferences section
for details.
NOTE: AutoLearn typically needs to encounter the exact
frequency in the same location approximately three
times to lock it out. Since some door openers are turned
on and o routinely, some variations may occur. When
AutoLearn is on, Dual Pro 360 will also unlearn signals to
protect you from locking out real threats. If a particular
signal is no longer present at a location that was
previously locked out, Dual Pro 360 will unlock that
signal.
10


Product specificaties

Merk: Cobra
Categorie: Navigator
Model: DUALPRO 360°

Heb je hulp nodig?

Als je hulp nodig hebt met Cobra DUALPRO 360° stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Navigator Cobra

Handleiding Navigator

Nieuwste handleidingen voor Navigator