Clas Ohlson YP-04238/01 Handleiding

Clas Ohlson Horloge YP-04238/01

Lees hieronder de 📖 handleiding in het Nederlandse voor Clas Ohlson YP-04238/01 (10 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
English
GREAT BRITAIN
customer service tel 020 8247 9300 customerservice@clasohlson.co.uke-mail
internet www.clasohlson.co.uk 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZpostal
Ver. 20180420
A
BC
D
Alarm
Day of week
Seconds
Minutes
Hourly chime
Hours
Date
Features
Press (B) repeatedly to change functions. Thesequence is: MODE
Time, alarm, stopwatch, countdown function (timer), additional time
zone.
A. Time
‱ 12/24-hour display
‱ Hours, minutes, seconds, day and date display.
‱ 50-year calendar. (2000–2049)
B. Alarm AL
Alarm sounds daily at
theset time.
Use
Setting thetime
C. Stopwatch ST
‱ Accuracy: 1/100 second.
‱ Stopwatch range: 00:00:00–59:59:99
D. Countdown timer TR
Countdown range: 59:59:00–00:00:00
E. Dual time zones T2
Dual time zone display.
2. Press start/stop (D) to reset theseconds display.
3. Press (B) to switch MODE
to thenext setting.
5. Repeat steps 3 and 4 for theremaining settings. Thesettings
sequence is as follows: Seconds – hours – minutes – year –
month – date.
6. Push (A) when you have completed inputting all your RESET
settings. Theday is automatically set when theyear, month
and date is set.
Switching between a12 and 24 hour display
When thewatch is in time display mode press
RESET (A) once to switch between 12 and 24
hour display. PM” is shown for the12 hour display“
and “24H” for the24 hour display.
Digital Watch
Art.no 36-4046-1 Model YP-04238/01
Please read theentire instruction manual before using theproduct
and save it for future reference. We reserve theright for any errors in
text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact
Customer Services.
Product description
Digital wristwatch with alarm, date, stopwatch with lap times,
countdown timer, dual time zones and multi-coloured backlight. Water
resistant to 10 ATM.
Buttons
A. Reset button
B. Mode button
C. Backlight button
D. Start/stop button
Display
Alarm & hourly chime
When thealarm is activated thesignal will sound daily at thepreset
time. Turn thealarm off by pressing any button when thealarm sounds.
Otherwise thealarm will sound for about 60 sec. With thehourly
chime activated thewatch will sound every hour on thehour.
Setting thealarm
1. With thewatch in time display mode press
MODE therequired number of times to
reach thealarm settings. Press once. RESET
Thealarm symbol will be displayed and
thehour display will begin ïŹ‚ashing.
Displaying thedate
When thewatch is in time display mode press
and hold to display thedate and year.start/stop
2. Press to incrementally increase start/stop
thedigits. Hold thebutton in to increase
thedigits quickly.
3. Press to switch to thenext setting.MODE
1. When thewatch is in time display
mode press and hold (A) until RESET
theseconds display starts to ïŹ‚ash.
4. Press start/stop (D)
repeatedly to increase
thedigits incrementally. Hold thebutton in to
increase thedigits quickly.
4. Press to incrementally increase start/stop
thedigits. Hold thebutton in to increase
thedigits quickly.
5. Press to save your settings when RESET
you have completed inputting them. Press
MODE therequired amount of times return
to normal time display.
English
GREAT BRITAIN
customer service tel 020 8247 9300 customerservice@clasohlson.co.uke-mail
internet www.clasohlson.co.uk 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZpostal
Ver. 20180420
Activating thealarm and hourly chime
‱ With thewatch in time display mode, press therequired MODE
number of times to reach thealarm settings. Press start/stop
once. Thealarm symbol will be displayed.
‱ Press start/stop therequired amount of times to either activate
thehourly chime or alarm and thehourly chime combined.
Combining the alarm and hourly chime
‱ Alarm only (alarm symbol displayed).
‱ Hourly chime only (chime symbol displayed)
‱ Both alarm and hourly chime (both symbols displayed)
Stopwatch
Without split-time
1. Press therequired number of times to MODE
reach thestopwatch mode.
3. Stop thestopwatch by pressing start/stop again.
4. Press RESET to reset thestopwatch back to zero.
With split-time
1. Press therequired number of times to MODE
reach thestopwatch mode.
3. Press to display split-time. “SPL” is RESET
displayed. Thestopwatch will not be visible
but will continue running in thebackground.
4. Press to view therunning stopwatch RESET
display.
5. Steps 3 and 4 can be repeated as many times as you like.
6. Press to stop thestopwatch.start/stop
7. Press to reset thestopwatch back to zero.RESET
Countdown timer
‱ When thewatch has counted down to zero analarm will sound.
Turn it off by pressing any button. Otherwise thealarm will
continue to sound for about 60 seconds.
‱ Thetimer can be set for up to 60 minutes.
Setting thecountdown timer
1. Press therequired number of times MODE
to reach countdown timer mode. “TR” will
be displayed.
3. Press to incrementally increase start/stop
thedigits. Hold thebutton in to increase
thedigits quickly.
2. Press to start start/stop
thestopwatch.
2. Press to start start/stop
thestopwatch.
2. Press for theminutes display. RESET
Once it starts ïŹ‚ashing you can enter your
desired settings.
Backlight
‱ Thebacklight provides illumination which
makes thedigits easier to read in darkness.
‱ Thebacklight can be turned on by pushing
thebacklight button. Thebacklight will be lit
for about 4 seconds.
Care and maintenance
‱ Never try to open thecasing.
‱ Do not press thebuttons when thewatch is under water.
‱ If there is any moisture inside thewatch contact our customer service
department immediately. Moisture inside thewatch could cause damage to
themetal parts.
‱ Thewatch can withstand some rough treatment, but do not expose it to
unnecessary blows.
‱ Do not expose thewatch to extreme temperatures.
‱ Clean thewatch using adry, soft cloth. Avoid strong detergents since they
can damage theplastic parts of thewatch.
‱ Avoid wearing thewatch in thevicinity of strong electromagnetic ïŹelds.
Responsible disposal
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout the entire EU.
In order to prevent any harm to the environment or health hazards
caused by incorrect waste disposal, the product must be handed in
for recycling so that the material can be disposed of in a responsible
manner. When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
Diameter 46 mm
Battery size CR2025 (included)
4. Press to reach to thenext setting.MODE
5. Press to incrementally increase start/stop
thedigits. Hold thebutton in to increase
thedigits quickly.
6. Push once you have completed RESET
inputting your settings.
Using thecountdown timer
1. Set thecountdown timer according to theinstructions above.
2. Press to start thecountdown timer.start/stop
3. Press again if you wish to pause thecountdown.start/stop
Dual time zones
Setting time zone 2
1. Press therequired number of times MODE
to reach thetime zone 2 setting. “T2” will
be displayed.
2. Press for thehours display. RESET
Once it starts ïŹ‚ashing you may input
thedesired setting.
3. Press to incrementally increase start/stop
thedigits. Hold thebutton in to increase
thedigits quickly.
4. Press to set theminutes.MODE
5. Press to change theminutes. start/stop
Pressing once changes thesetting in
30 minute increments.
6. Push once you have completed RESET
inputting your settings.
Water resistant 10 ATM
Svenska
SVERIGE
kundtjÀnst tel. fax 0247/445 00 0247/445 09 e-post kundservice@clasohlson.se
internet www.clasohlson.se Clas Ohlson AB, 793 85 INSJÖNbrev
Ver. 20180420
Timsignal
Veckodag
Sekunder
Minuter
Alarm
Timmar
Datum
Funktioner
Tryck pÄ -knappen (B) upprepade gÄnger för att byta funktion.MODE
Sekvensen Àr: Tid, alarm, stoppur, nedrÀkningsfunktion (timer), tid
för annan tidszon.
A. Tid
‱ 12/24-timmarsformat
‱ Visar timmar, minuter, sekunder, veckodag
och datum.
‱ Kalender för 50 Ă„r. (2000–2049)
B. Alarm AL
Alarmet ljuder varje dag vid
förvald tid.
AnvÀndning
StÀlla in tiden
C. Stoppur ST
‱ Noggrannhet: 1/100 sekund.
‱ MĂ€ttid: 00:00:00–59:59:99
D. NedrÀkningsfunktion (timer) TR
NedrĂ€kningstid: 59:59:00–00:00:00
E. Dubbla tidszoner T2
Visar tid för tvÄ tidszoner.
2. Tryck pÄ (D) för start-/stoppknappen
att nollstÀlla sekundangivelsen.
3. Tryck pÄ -knappen MODE
(B) för att vÀxla till nÀsta
instÀllningslÀge.
5. Repetera steg 3 och 4 för att göra samtliga instÀllningar.
Sekvensen pĂ„ instĂ€llningar Ă€r: Sekunder – timmar – minuter – Ă„r
– mĂ„nad – datum.
6. Tryck pÄ -knappen (A) nÀr du gjort alla instÀllningar. RESET
Veckodagen stÀlls in automatiskt nÀr du stÀllt in Är, mÄnad och
datum.
Ändra mellan 12- eller 24-timmars visning
NÀr klockan visar tid, tryck en gÄng pÄ RESET-
knappen (A) för att vÀxla mellan 12- eller 24-timmars-
visning. ”PM” visas i displayen vid 12-timmars-
visning och vid 24-timmarsvisning visas ”24H”
i displayen.
Armbandsklocka digital
Art.nr 36-4046-1 Modell YP-04238/01
LÀs igenom hela bruksanvisningen före anvÀndning och spara den
sedan för framtida bruk. Vi reserverar oss för ev. text- och bildfel
samt Àndringar av tekniska data. Vid tekniska problem eller andra
frÄgor, kontakta vÄr kundtjÀnst.
Produktbeskrivning
Digital armbandsklocka med alarm, datum, stoppur med varvtider,
nedrĂ€kningstimer, dubbla tidzoner och ïŹ‚erfĂ€rgad bakgrundsbelysning.
VattentÀt 10 ATM.
Knappar
A. RESET (ÅterstĂ€llning)
B. MODE (InstÀllningar)
C. Backlight (Bakgrundsbelysning)
D. Start/Stop (Start/Stopp)
Display
Alarm & Timsignal
NÀr alarmet Àr aktivt ljuder larmet varje dag vid den förinstÀllda tid-
punkten. Du stÀnger av det genom att trycka pÄ vilken knapp som
helst under den tiden larmsignalen ljuder. I annat fall ljuder alarmet
i ca 60 sek. NÀr timsignalen Àr aktiv ljuder klockan varje heltimme.
StÀlla in tidpunkt för alarmet
1. -knappenNÀr klockan visar tid, tryck pÄ MODE
upprepade gÄnger för att komma in i alarmlÀget.
Tryck en gÄng pÄ -knappen. Alarm-RESET
symbolen visas i displayen och timmarna
blinkar.
Visa datum
NÀr klockan visar tid, tryck och hÄll in start-/
stoppknappen för att visa datum och Ärtal.
2. Tryck pÄ upprepade start-/stoppknappen
gÄnger för att öka vÀrdet ett steg i taget.
HÄll in knappen om du vill öka vÀrdet snabbt.
3. Tryck pÄ -knappen för att vÀxla till MODE
nÀsta instÀllningslÀge.
1. NĂ€r klockan visar tid, tryck och
hÄll in -knappen (A) tills RESET
sekundangivelsen börjar blinka.
4. Tryck pÄ start-/
stoppknappen (D)
upprepade gÄnger för att öka vÀrdet ett steg
i taget. HÄll in knappen om du vill öka vÀrdet
snabbt.
4. Tryck pÄ upprepade start-/stoppknappen
gÄnger för att öka vÀrdet ett steg i taget.
HÄll in knappen om du vill öka vÀrdet
snabbt.
5. Tryck pÄ -knappen nÀr du gjort alla RESET
instÀllningar för att spara. Tryck pÄ -MODE
knappen upprepade gÄnger för att ÄtergÄ till
tidvisning.
A
BC
D


Product specificaties

Merk: Clas Ohlson
Categorie: Horloge
Model: YP-04238/01

Heb je hulp nodig?

Als je hulp nodig hebt met Clas Ohlson YP-04238/01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Clas Ohlson

Handleiding Horloge

Nieuwste handleidingen voor Horloge