Clarion EA1251B Handleiding

Clarion Navigator EA1251B

Lees hieronder de 📖 handleiding in het Nederlandse voor Clarion EA1251B (15 pagina's) in de categorie Navigator. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
3
English
1. INTRODUCTION
The interface adapter for iPod® by Clarion,
EA1251, works by simulating the iPod as a 6
Disc CeNET CD Changer. Please consult your
main unit’s Owner’s Manual for CD Changer
operations before beginning to use EA1251.
Clarion Multimedia Station of VRX series cannot
control EA1251 through the KEY PAD screen or
the list screen. If required so, please use the
function buttons instead. Some EA1251 functions
might not be available.
2. CAUTION
Please check your iPod Owner’s Manual for the
operating temperature as leaving iPod in your
vehicle might damage it due to temperature
variations and moisture.
Some main unit models with CD-Text function
have the capability to show ID3 TAG if iPod is
connected through EA1251. Please refer to Title
Display Section for more details.
For list of main unit compatible to EA1251, please
consult your nearest Clarion dealer.
For iPod operations, please refer to iPod Owner’s
Manual.
4
English
iPod, iPod mini
(Sold separately)
To Dock
connector
To iPod
terminal
iPod connection cable (Included)
To CeNET
connector
CeNET compatible
Main Unit
(Sold separately)
To CeNET
connector
(Sold separately)
CeNET compatible
CD Changer
(Sold separately)
If user want to connect CD Changer
together, please change address switch
to No.2
Y-adaptor for
Multi-changer
connection (CCA-519)
3. CONNECTION
Please consult your nearest Clarion dealer before attempting to connect EA1251 to your main unit and
iPod. Improper connection might damage your main unit, EA1251, iPod or your vehicle wiring.
Please make sure the Yellow wire (Bus power lead
) is connected on the CeNET compatible Main Unit
(This wire usually has a 3 Amp Fuse inserted
) connects to battery. If this wire is not connected, the iPod
interface will not function.
Please refer to the wiring instructions for your CeNET Main Unit or contact your Clarion Dealer.
iPod, iPod mini
(Sold separately)
To Dock
connector
To iPod
terminal
iPod connection cable
(Included)
To CeNET
connector
CeNET cable
(Included)
CeNET compatible
Main Unit
(Sold separately)
To CeNET
connector
Note:
The C-Bus conversion adaptor (RCB-138 ) is not compatible with current system.
1. Connect the iPod to the CeNET compatible Main Unit.
2. Connect the iPod to the CeNET compatible Main Unit and CD Changer.
5
English
4. INSTALLATION
There are no moving parts in EA1251. However,
caution must be taken to make sure minimum
damage to the unit. Do not press, puncture or
drop the unit at anytime. Install the unit where
there is no direct sunlight, away from air condition
ducts or high moisture areas and away from other
vehicle electronic components.
Using Screw
There are screw mounting holes in EA1251.
Before drilling, make sure there are no hidden
wires and parts that might be damaged.
Improper wiring might damage EA1251, main
unit and iPod.
CAUTION
!
Using Velcro or 2-Sided Tapes
Stick velcro or 2-sided tapes to the unit.
Note:
In case of using velcro or 2-sided tapes, make sure
the unit will not fall down as this might damage the
electronic component inside.
Velcro or 2-sided tapes
Floor
(M4x14)


Product specificaties

Merk: Clarion
Categorie: Navigator
Model: EA1251B

Heb je hulp nodig?

Als je hulp nodig hebt met Clarion EA1251B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Navigator Clarion

Handleiding Navigator

Nieuwste handleidingen voor Navigator