Citizen PD-22 Handleiding

Citizen Printer PD-22

Lees hieronder de 📖 handleiding in het Nederlandse voor Citizen PD-22 (40 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

User's Manual

Handy Printer

PD-22

Latest Information

Printer Drivers, Servicing and Consumables

For the latest information on your PD-22 printer:

• where to obtain service inside or outside of the warranty period

• printer drivers for the latest operating systems

• additional consumables and accessories

please contact Citizen’s office in your region:

United States, Canada, South America:

Citizen Systems America Corporation

www.citizen-systems.com

363 Van Ness Way, Suite 404 Torrance, CA 90501. USA

Tel: (310) 781-1460

Europe, Middle East & Africa:

Citizen Systems Europe GmbH

www.citizen-europe.com

UK: Park House, 643–651 Staines Road, Feltham, Middlesex, TW14 8PA

Tel: +44 (0) 20 8893 1900

Germany: Mettinger Strasse 11, D-73728, Esslingen.

Tel: +49 (0) 711 3906 420

Asia

Citizen Systems Japan Co., Ltd.

www.citizen-systems.co.jp

6-1-12, Tanashi-cho, Nishi-Tokyo-shi, Tokyo 188-8511. JAPAN

Tel: +81 (0) 424 68 4608

CITIZEN is a registered trade mark of CITIZEN WATCH CO., LTD., JAPAN

Company names and product names in this manual are trademarks or

registered trademarks of relevant companies.

Contents

FCC Declaration of Conformity ................................................ 4

Declaration of Conformity ....................................................... 5

Compliance Statements ........................................................... 6

Safety Instructions ................................................................... 7

Accessories ............................................................................ 14

Included Accessories ..................................................................................................... 14

Optional Accessories .................................................................................................... 14

External Appearance and Part Descriptions ............................ 15

About the Power Source ......................................................... 18

Loading the Batteries .................................................................................................... 18

Unloading the Batteries............................................................................................... 20

Tu rning the Power On and Off .................................................................................... 21

About the Auto Power Off Function ...................................................................... 21

Connecting the Printer .......................................................... 22

Data Reception Methods ............................................................................................ 22

Connecting with the Infrared Port (Optical Interface) .................................... 22

Connecting with the Serial Port (Cable) .............................................................. 23

Loading the Paper.................................................................. 24

Loading Roll Paper ......................................................................................................... 24

If the Paper is Not Loaded Straight ...................................................................... 25

When Printing is Finished ........................................................................................ 25

Feeding Single Sheets (Cut sheets) ......................................................................... 26

Use of the following single (cut) sheet paper is recommended .................... 26

Printing Test .......................................................................... 27

Self-Print Function ........................................................................................................ 27

Hex Dump Function ...................................................................................................... 28

Internal Menu Settings List Print Function ............................................................. 29

Care and Maintenance ........................................................... 30

Tr oubleshooting .................................................................... 31

Optional AC Adaptor Kit ....................................................... 32

Installing the Battery Adaptor..................................................................................... 32

Specifications ........................................................................ 33

FCC Declaration of Conformity

We, the Responsible Party: Citizen Systems America Corporation

363 Van Ness Way, Suite 404

Torrance, CA 90501. USA

Tel: (310) 781-1460

declares that the product:

Trade Name: CITIZEN

Product Name: Printer

Model Number: PD-22

confirms to the following specifications:

Regulation: FCC Part 15B, Class B

Test Method: ANSI C63.4-1992

and therefore is in compliance with the protection requirement of FCC

Rules relating to electromagnetic compatibility.

issued on 1, Sep., 2009

Authorized Signature:

Masao Yamazaki

President

DECLARATION OF CONFORMITY

We, Citizen Systems Europe GmbH

Park House

643-651 Staines Road

Feltham, Middlesex

TW14 8PA. United Kingdom

declare under our sole responsibility that the product:

Product Type: Thermal Printer

Model Name: PD-22

manufactured by : Citizen Systems (Jiangmen) Co., Ltd.

399 Jinxing Road, Jiangmen

Guandong, 518122 CHINA

in 2009, to which this declaration relates is in conformity with the following standards:

EMC: EN 55022:1998, EN61000-3-2:2000,

EN61000-3-3:1995+A1:2001, EN 55024:1998

Following the provisions of EMC (2004/108/EC) based on the following docu-

ments:

1. EMI Test Report issued by TÜV OHTAMA CO., LTD.

2. Immunity Test Report issued by TÜV OHTAMA CO., LTD.

(European Representative)

London, 1st September 2009

Yasuhiro Kiuchi

Managing Director

Citizen Systems Europe GmbH

Compliance Statements

FCC Compliance Statement for American Users

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Use shielded cables to connect this device to computers.

Any changes or modifications not expressly approved by the grantee of this

device could void the user’s authority to operate the equipment.

EMI Compliance Statement for Canadian Users

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Declaration for European Users

CE marking shows conformity to the following criteria and provisions.

• EMC Directive (2004/108/EEC)/EN55022, EN55024, EN61000-3-2 & EN61000-3-3

Safety Instructions

The Symbols

Instructions that must be followed to prevent any risk to the user and other people and

any damage to property are indicated as shown below. The degree of risk and damage that

will occur if a user operates the machine improperly by failing to obey any of the indicated

instructions are categorized as follows. Read the User’s Manual after you fully understand

this categorization.

Indicates a situation where there is a high probability

of the death or serious injury of a person.

Indicates that if a person uses the machine improperly

by failing to obey this instruction, there is a possibility

of death or serious injury.

Indicates that if a person uses the machine improperly

by failing to obey this instruction, there is a possibility

of serious injury or of property damage.

Danger

Warning

Precaution

Meaning of symbols

This symbol indicates that something must be handled carefully.

This symbol indicates something that must not be done.

This symbol indicates something that must be done.

7 Precautions to be followed when handling the printer

Warning

• If the printer is used after it has become hot or produced smoke, a strange smell,

etc., it will start a fire. Immediately cut off the power, remove its battery, and

contact your service representative.

• If any foreign matter (metal scraps, water, or other fluid) gets inside the printer,

first cut off the power and remove the battery, then contact your service represen-

tative. If you use it in this condition, it will start a fire.

Precaution

• Do not put in on top of a shaky stand or other unstable place. If may fall or topple

over causing an injury.

• Neither uses it nor stores it in the following locations. If you do, it will malfunction.

– In a car that is exposed to the sun, in any place exposed to direct sunlight, near

a heater etc.

– Place where the temperature and humidity are very high or low or where they

fluctuate widely.

– Extremely dusty place

– Place exposed to water or other fluid

• Do not drop it or vigorously strike or vibrate it. If you do, it will be damaged or

malfunction.

• Keep all foreign material out of the printer. This will cause it to malfunction.

• Do not use a volatile fluid (thinner, benzine, etc.) or wet cloth to clean the printer.

If you do, it will be degraded or discolored. Clean it with a dry soft cloth.

• During printing or when it is in standby status, do not move, shake or strike the

printer. There is a danger that the power will be cut off, losing printing data.

7 Precautions to be followed when operating the printer

Warning

• Be extremely careful not to touch the print head or paper cutter when replacing

the paper. When the print head has become heated, there is a danger of it burning

your hand. And part of the cutter might cut your hand.

Precaution

• If you use any paper other than the designated kind, the print quality will fall and

the service life of the print head (printing unit) will be reduced.

• Do not perform printing and do not push the paper feed button while there is no

paper in the printer. The heat of the print head will deform the platen (roller) and

friction with the platen will damage the print head.

• Do not tap or rub the print head with a sharp or hard object.

• If moisture has condensed on the print head, be sure to wait until it is completely

dry before performing printing. If you print while the print head is moist, there is a

danger of damage to the print head.

• Do not use any batteries other than AA rechargeable NiMH batteries, AA recharge-

able NiCd batteries, and AA alkaline batteries.

• Always use four identical batteries at the same time.

Safety Instructions

7 Precautions when using rechargeable batteries

Danger

• If the fluid of a rechargeable battery gets in your eyes, you will be in danger of

being blinded, so immediately wash them with clean water without rubbing them

and promptly go to a doctor for treatment

• The plus and minus directions of rechargeable batteries are preset. When placing

batteries in the printer, check the plus and minus directions. If you do not, the

batteries may leak, overheat, or crack.

• If you do not obey the following instructions, the rechargeable battery will leak,

overheat, or crack. Be sure to obey the following instructions.

– Do not place them in a fire or heat them.

– Do not remove nor scratch their external tube.

– Do not solder them.

– Do not throw them or strike them vigorously.

– Do not touch their plus and minus terminals with a wire or other metal object.

• Do not take apart or modify a rechargeable battery. If a rechargeable battery is

taken apart or modified, it will leak, overheat, or crack.

Warning

• If fluid from a rechargeable battery touches your skin or clothing, there is a danger

of it harming your skin, so wash it off with clean water immediately.

• Before placing dry cell batteries or rechargeable batteries in the printer, make sure

that the covering of the battery has not been removed and is not scratched.

Be particularly careful when using the same batteries for a long time.

• If the covering on the surface of batteries has been removed or is scratched, do

not use them. If it is, the batteries will short-circuit causing them to leak, overheat,

or crack.

• Do not remove or scratch the covering on the surface of the batteries. If you do,

the batteries will short-circuit causing them to leak, overheat, or crack.

• Do not use old and new batteries, different kinds of batteries, or batteries made by

different makers at the same time.

• When using rechargeable batteries, do not use batteries with different charged

conditions at the same time.

• Do not charge and use alkali batteries or lithium batteries that cannot be charged.

7 Precautions when using thermal paper (printing paper)

Precaution

• The darkness (density) of printing varies according to the type of printing paper

used. The printing darkness (density) is adjusted either in the printer driver or

using a software command. For details of this command, please refer to the

Command Reference Manual available from your supplier.

• When using copy type printing paper, set two sheets of copy paper with either in

the printer driver or using a software command. For details of this command,

please refer to the Command Reference Manual available from your supplier.

• When using copy type printing paper, occasionally, the first or second sheet feeds

incorrectly, blurring the printing. When this happens, start the printing over from

the beginning.

7 Precautions when using the specialized RS-232C cable

Warning

• When using one of the connectors on the printer, do not touch the metal part of

the other connector.

Precaution

• There is a danger of static electricity damaging the internal circuits of the product.

• Do not leave the cable wrapped around the product for a long time. If you do,

there is danger of breakage and discoloration of the cable.

Included Accessories

After opening the package, confirm that the printer and the following standard accessories

have been included.

Optional Accessories

The following optional accessories are available for use with this printer. Purchase as

needed.

User's Manual

(This Volume)

Roll Paper

(φ30 mm x 10 m)

Size AA

Alkaline Batteries (4)

Roll Paper

(φ30 mm x 10 m)

RS-232C Cable (9-pin D-sub type connector)

(Part No. PD79901-0S)

Accessories

AC Adaptor Kit

(Part No. PD69957-0S)

AC Adaptor Battery Adaptor Battery Adaptor Cover Installation Guide

External Appearance and Part Descriptions

Error Indication Table

Type of Error POWER LED (Green) ERROR LED (Red)

Batteries running low OFF

No paper (used up) ON

Offline after paper loaded*1

Printhead overheated

Paper feed motor overheated

Black mark (p. 17) not detected

Roll paper cover open

ON ON

Hardware error OFF

OFF

Time Axis

ON,

OFF

OFF OFF ON

OFF OFF

ON ONOFF OFF

ON ONOFF OFF ON

OFF OFF

1POWER LED (POWER: Green)

The green indicator lights up when the power button ( ) is pressed continuously for

2 to 3 seconds.

Additionally, the indicator blinks according to the printer mode (refer to the Error

Indication Table). The indicator blinks more slowly when the batteries are running low.

Replace the batteries when this occurs.

2ERROR LED (ERROR: Red)

The red indicator lights or blinks when the printer is unable to print because of the

following conditions.

*1: Indicated only when the printer’s internal “Offline status at reloading paper” setting (p. 29) is

set to “Enable”

3Optical Receiver

Receives printing data through infrared transmission.

4Serial Port

Connect the optional RS-232C cable here when using the cable for printing.

5POWER Button( )

Turns the printer’s power on and off.

To turn on the power, press this button continuously (2 to 3 seconds) until the power

LED lights up.

6FEED Button (Paper Feed/Clear Error)

The paper is fed while this button is held down. The feeder does not operate unless

the paper is set in the printer.

7Cover Open Button

Slide this button to open the cover. Close the cover after loading a roll paper.

8Paper Check Window

Use to confirm that paper is loaded in the printer.

9Cut Sheet Insertion Slot

Insert single sheets (cut sheets) of paper here.

0Paper Exit Slot/Paper Cutter

The printed paper exits from the printer here. The slot includes a cutter (tear bar),

which is used to cut the paper from the roll after printing.

-Roll Paper Cover

Open the cover to load a roll paper. Close the cover after the paper is loaded.

External Appearance and Part Descriptions

Printer Underside

Inside the Printer

External Appearance and Part Descriptions

=Paper Feed Roller

This feeds the paper to the

paper exit slot.

~Paper Holder

The roll paper is placed here.

!Cover Sensor

Detects whether the roll paper

cover is open or closed.

@Paper End/Black Mark

Detector

Detects whether or not paper is

loaded.

7 About the Black Mark

This is a black marking that is

pre-printed on the paper’s print

side. Once the black mark is

detected, you can then feed the

paper as needed with more

accurate detection of the point

where the paper is to be cut.

#Print Thermal Head

This is the actual printing

component.

$Battery Cover

Remove the cover to load the

batteries (see p. 18).

%Battery Release Strip

Pull it upwards to release the

batteries.

^Battery Protective Sheet

Protects surface of the batteries.

Use These Batteries

7You can use the following batteries with this product. Use only four batteries of

identical type.

• AA rechargeable NiMH batteries (Recommended)

• AA rechargeable NiCd batteries

• AA alkaline batteries

7Do not use any batteries other than those listed above.

Use of batteries other than those specified may result in damage to the unit.

7The service life of AA alkaline batteries may be reduced according to the environment

or the way they are used. In such cases, use AA rechargeable NiMH batteries or AA

rechargeable NiCd batteries.

Precautions when using batteries

• Before loading dry cell batteries or rechargeable batteries in the printer, make sure

that the covering of the battery has not been removed and is not scratched. And

when removing and replacing rechargeable batteries, handle them very carefully so

that you do not remove or scratch the covers of the batteries.

Be particularly careful when using the same batteries for a long time.

• Remove the batteries from the printer if you are not going to use it for a long time.

If you do not, the batteries may leak.

• The electric power consumption of this printer varies greatly according to the

printing type.

When batteries that have been stored for a long time or AA alkaline batteries that

have been drained of energy are used, the printing may be too light or printer power

may be cut off without any indication of a power reserve error (P. 15).

• The service life of AA alkaline batteries may be shortened depending on the manufac-

turer and utilization temperature (particularly low temperatures) and the amount of

time that has passed since the batteries were manufactured.

The printer only runs on four AA rechargeable or dry cell batteries.

This section explains how the batteries are loaded and provides additional information

about the batteries.

About the Power Source

Loading the Batteries

About Battery Chargers

When using NiMH or NiCd batteries, be sure to obtain an appropriate charger that

conforms to the specifications for the respective battery type.

Product specificaties

Merk:	Citizen
Categorie:	Printer
Model:	PD-22
Gewicht:	110 g
Connectiviteitstechnologie:	Draadloos
Ondersteund aantal accu's/batterijen:	4
RS-232 port:	1
Maximale resolutie:	203 x 203 DPI
Maximum roll diameter:	30 mm
Printtechnologie:	Thermo transfer
Standaard interfaces:	IrDA, Serial
Afmetingen (B x D x H):	76 x 105 x 35 mm
Ingebouwde streepjescodes:	Codabar (NW-7), Code 39, UPC-A, UPC-E
Printsnelheid (metrisch):	38 mm/sec
Type batterij:	AA
Ondersteunde papierwijdte:	58 mm
Bedrukbaar gebied (A3):	48 mm