Christie Spyder X80 Handleiding

Christie Processor Spyder X80

Lees hieronder de 📖 handleiding in het Nederlandse voor Christie Spyder X80 (24 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Product Safety Guide
020-102023-01
Spyder X80
Important Safety
Information
Read this document carefully before installing or operating the
Spyder X80. Store the document in a location close to the
Spyder X80 for future reference.
For installation, setup, and user information, see the product
documentation available on the USB flash drive or access the
documentation from the Christie Digital Systems USA Inc.
website at . Read all instructions beforewww.christiedigital.com
using or servicing this product.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this
product to rain or moisture.
Do not alter the power plug, overload the power
outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to
service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to
service the product.
Notation
Learn the hazard and information symbols used in the product
documentation.
Danger messages indicate a hazardous situation
which, if not avoided, results in death or serious
injury.
Warning messages indicate a hazardous situation
which, if not avoided, could result in death or
serious injury.
Caution messages indicate a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
Notice messages indicate a hazardous situation
which, if not avoided, may result in equipment or
property damage.
Information messages provide additional
information, emphasize or provide a useful tip.
Important safeguards
To prevent personal injury and to protect the device from
damage, read and follow these safety precautions.
General safety precautions
Warning! If not avoided, the following could result in
death or serious injury.
• SHOCK HAZARD! Disconnect the product from AC before
moving, servicing, cleaning, removing components, or
opening any enclosure.
• A minimum of two people or appropriately rated lift
equipment is required to safely lift, install, or move the
product.
• Motors and fans may start without warning.
Power precautions
Warning! If not avoided, the following could result in
death or serious injury.
• FIRE AND SHOCK HAZARD! Do not operate the system
unless certified power connections, providing the
recommended voltage, are used.
Caution! If not avoided, the following could result in
minor or moderate injury.
• SHOCK HAZARD! Only use the AC power cord provided
with the product or recommended by Christie.
• TRIP OR FIRE HAZARD! Position all cables where they
cannot contact hot surfaces, be pulled, be tripped over,
or damaged by persons walking on or objects rolling over
the cables.
• FIRE HAZARD! Do not use a power cord, harness, or
cable that appears damaged.
• FIRE OR SHOCK HAZARD! Do not overload power outlets
and extension cords.
• SHOCK HAZARD! The AC power cord must be inserted
into an outlet with grounding.
• SHOCK HAZARD! Do not attempt operation if the AC
supply is not within the specified voltage and power
range, as specified on the license label.
Power requirements
Description Details
Input voltage 90-264 V~, 50-60 Hz, 14A, 75 watts
Maximum power draw: 1680 watts
Technical support
• North and South America: +1-800-221-8025 or
Support.Americas@christiedigital.com
Spyder X80 Product Safety Guide 2
020-102023-01 Rev. 1 (07-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
• Europe, Middle East, and Africa: +44 (0) 1189 778111 or
Support.EMEA@christiedigital.com
• Asia Pacific: +65 6877-8737 or
Support.APAC@christiedigital.com
Important Safety Information
Spyder X80 Product Safety Guide 3
020-102023-01 Rev. 1 (07-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.


Product specificaties

Merk: Christie
Categorie: Processor
Model: Spyder X80
Kleur van het product: Zwart
Ingebouwd display: Ja
Gewicht: 36170 g
Breedte: 441 mm
Diepte: 598 mm
Hoogte: 261 mm
Gewicht verpakking: 49490 g
Breedte verpakking: 584 mm
Diepte verpakking: 786 mm
Hoogte verpakking: 414 mm
Gebruikershandleiding: Ja
Ethernet LAN: Ja
Vermogensverbruik (max): 1680 W
HDCP: Ja
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Rack-montage: Ja
RJ-45 ports hoeveelheid: 1
HDMI in: 1
Aantal HDMI-uitgangen: 1
BNC input ports: 1
AC-ingangsspanning: 90 - 264 V
AC-ingangsfrequentie: 50 - 60 Hz
Bedrijfstemperatuur (T-T): 5 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 20 - 80 procent
Type beeldscherm: LCD
Geschaalde resoluties: 4096 x 2400
RS-232/422-connector: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Christie Spyder X80 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Processor Christie

Handleiding Processor

Nieuwste handleidingen voor Processor