Chord Ultima Pre 2 Handleiding

Chord Receiver Ultima Pre 2

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Chord Ultima Pre 2 (3 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Connecting ULTIMA PRE 2 to a power ampliļ¬er 4.0
To connect ULTIMA PRE 2 to your power ampliļ¬er, choose either XLR
or RCA.
It is important to know that if you are using the volume dial or modifying
the balance on ULTIMA PRE 2, it will only eī˜žect this output.
Chord Electronics
ULTIMA PRE 2 | Quickstart Manual
The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB, United Kingdom
info@chordelectronics.co.uk
chordelectronics.co.uk
Quickstart Manual
Introduction 1.0
Welcome to the ULTIMA PRE 2 Quickstart Guide. This shortened guide
is supplementary to the main manual which should be referred to for
full safety and operational information.
Please note, more information on any of these topics is listed within the
full manual found under the product page:
chordelectronics.co.uk/product/ultima-pre2
Warranty 1.1
The ULTIMA PRE 2 comes with a comprehensive 5-year warranty.
To activate the warranty, please register your device via the Chord
Electronics website:
chordelectronics.co.uk/register-product
Connecting ULTIMA PRE 2 to a source 3.0
First, you must ensure that ULTIMA PRE 2, and any connecting
equipment, is turned oī˜ž.
You can connect ULTIMA PRE 2 to a source using any of the
highlighted inputs shown below.
Please note that each input is arranged as a stereo pair, right and then
left which is indicated on the furthermost sides of the inputs. Later,
when you come to switch ULTIMA PRE 2 on, each pair of inputs will
be shown as ā€˜LINE ā€™ on the display. LINE 1-4 begins with the pairs of X
XLRs and LINE 5, 6, T1 and T2 is the RCA pair next to these and so on.
Note that the connectors on the right hand side of the unit are
outputs and bypass ports. You must not connect any inputs here.
Balanced
input 1-4
Unbalanced
line 5-8
XLR and
RCA
outputs
Please ensure there is suī˜cient ventilation around ULTIMA PRE 2 at
all times. Avoid placing ULTIMA PRE 2 in enclosed spaces, on soft
surfaces, near sources of heat and never cover its ventilation holes. For
optimum operation and ventilation leave some space around the unit.
Placement 2.0
Chord Electronics
ULTIMA PRE 2 | Quickstart Manual
The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB, United Kingdom
info@chordelectronics.co.uk
chordelectronics.co.uk
Quickstart Manual
Powering up ULTIMA PRE 2 7.0
Now that the system is connected you must ensure that the volume
control is set to the minimum and that nothing is playing. Then, switch
on any sources before ULTIMA PRE 2 and then ļ¬nally your ampliļ¬er.
This sequence should always be followed to protect connected
devices. Slowly increase the voume to a comforable level.
Volume and balance control 9.0
Now that you have successfully completed the setup of your ULTIMA
PRE 2 we advise that you register your product with us. Registering
helps us give you the best possible support and protects your
investment:
Product registration 10.0
chordelectronics.co.uk/register-product/
Navigating the menu 8.0
To assign the main output with a particular input signal, press the A
button several times to cycle through the 7 options and select the
desire input.
Once all audio inputs and outputs are correctly connected and carefully
checked please connect the power cable to ULTIMA PRE 2.
Connecting ULTIMA PRE 2 to power 6.0
On your source commence playback and, using the left-hand dial,
slowly increase the volume of ULTIMA PRE 2, to a safe listening level.
The dial on the right adjusts balance. Typically, this should remain in
the centre of its rotation for balanced sound between the left and right
outputs, however if you require ļ¬ner adjustment then ULTIMA PRE 2
accommodates.
Connecting ULTIMA PRE 2 to heaphones 5.0
If you want to use the ULTIMA PRE 2 with headphones, it features two
1/4 inch headphone sockets on the front panel. Headphone mode does
not automatically mute your loudspeakers, so ensure your ampliļ¬er is
turned oī˜ž when using this mode.
Headphone
inputs


Product specificaties

Merk: Chord
Categorie: Receiver
Model: Ultima Pre 2

Heb je hulp nodig?

Als je hulp nodig hebt met Chord Ultima Pre 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Chord

Handleiding Receiver

Nieuwste handleidingen voor Receiver