Chord SM-40 Handleiding

Chord Speaker SM-40

Lees hieronder de 📖 handleiding in het Nederlandse voor Chord SM-40 (1 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
SM-20, SM- 40
STAGE MONITORS
Item ref: 3.452UK, 173.454UK 17
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the Chord -series stage monitors. These wedge enclosures can be used for foldback on stage or as e-drum SM
or instrument amplifiers for rehearsal or backline. Please read this manual to avoid damage through misuse and keep for reference.
Warning
This product contains no us -serviceable parts inside. Refer all servicing to qualified personnel. er
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop us g immediately, allow unit to dry out and have checked by qualified personnel. in
Control panel
Operation
Connect instrument or line input to the INSTRUMENT channel via 6.3mm mono jack or 3.5mm stereo jack (1, 2)
Another line input, such as playback device, can be connected to the LINE channel 3.5mm stereo jack (3) a
(left & right audio from 3.5mm stereo jack inputs are summed to mono) .
Connect the rear IEC connector to the mains power supply with the supplied power lead, ensuring the correct supply voltage.
With Instrument and Line volume controls turned fully down (4, 5), switch on the power (9) and the power LED will light (8).
Play a signal into the instrument or line channel whilst gradually increasing the volume and then adjust to the required level.
Bass and Treble EQ controls (6, 7) should be set pointing vertically and can be adjusted clockwise to boost or anticlockwise to cut the
selected frequencies. Adjust these to suit the tone of the input source and room acoustics.
Turn down volume controls before powering down to avoid loud noises when switching off.
Specifications
Model
SM- 20
SM- 40
Power supply
230Vac, 50/60Hz (IEC)
Fuse
F500mAL, 250V
Inputs
Instrument / line 6.3 or 3.5mm jack, Line input 3.5mm jack
Controls
Ch.1 level, Ch.2 level, bass & treble
Power consumption max.
50W
80W
Power output
20Wrms
40Wrms
Drivers
165m (6.5“) dual concentric 30W
250m (10“) dual concentric 70W
Dimensions
349 x 310 x 269mm
429 x 362 x 343mm
Weight
6.7kg
11.2kg
Disposal: product means that the product is classed as Electrical or The “Crossed Wheelie Bin” symbol on the
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2019. AVSL Group Ltd.
1
Instrument (or line) input 6.3mm mono jack
2
Instrument (or line) input 3.5mm stereo jack
3
Line input 3.5mm stereo jack
4
Instrument input volume
5
Line input volume
6
Low EQ adjust
7
High EQ adjust
8
Power indicator LED
9
Power on/off rocker switch


Product specificaties

Merk: Chord
Categorie: Speaker
Model: SM-40

Heb je hulp nodig?

Als je hulp nodig hebt met Chord SM-40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Chord

Chord

Chord SM-40 Handleiding

13 Maart 2023
Chord

Chord SM-20 Handleiding

6 Januari 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker