Chord CPM 3350 Handleiding

Chord Receiver CPM 3350

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Chord CPM 3350 (16 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1
welcome
Thank you for buying a Chord product.
Before you start to enjoy using to your Chord product, please take a couple of
minutes to read how to connect your audio equipment and loudspeakers to your
pre-amplifier or integrated amplifier and how to maximize your listening experience.
user guide for
integrated amplifiers
CPM 2650, CPM 3350
Chordโ€™s integrated amplifiers are based on a combination of our highly
successful pre-amplifiers and power amplifiers together with a few features of their
own.
The power amplifier is based on Chordโ€™s tried and tested technology of ultra high
frequency ESR power supply which has the ability to store more energy far more
efficiently than conventional designs.
A variety of outputs means that you can choose to drive up to two sets of
loudspeakers, use your integrated amplifier as a pre-amplifier or use it in conjunction
with another power amplifier for bi- i amp ng.
background
We want you to be confident using your new Chord amplifier.
Youโ€™re probably an audiophile with extensive knowledge of audio equipment.
However, you may not be!
So in the following section we explain a few basics to help you get started, or get you
back up to speed if youโ€™re a little rusty.
connecting your equipment
Chord amplifiers are supplied with and designed to be connected using balanced
inputs. The interconnecting cables you use will depend on the available input and
output sockets on your other equipment. We have installed unbalanced inputs on all
Chord equipment, thus enabling you to mix Chord and other manufacturerโ€™s
equipment.
Balanced inputs carry twice the strength of signal of unbalanced inputs and are able
to be fed down long lengths of cable with less deterioration of signal. They are also
less prone to interference than unbalanced inputs. Balanced inputs have three pins
and use Neutric XLR style connectors. Pin 1 is earth, pin 2 is positive and pin 3 is
negative.
Unbalanced inputs use RCA phono connectors which are gold plated with teflon
high performance dielectric insulators for optimum performance.
outputs
speakers
power amplifier
pre-amplifier
or
integrated
amplifier
audio source
inputs
outputs
inputs
CD player tuner
PUSH
1
3
2
3
when setting up
To ensure that your Chord integrated amplifier works efficiently and safely, please pay particular attention to the
following issues.
ventilation
Your Chord integrated amplifier should have at least 5cm of clear space all around it to ensure a free flow of air at
all times. When driven continuously at well above average levels, the temperature at the back of the unit may exceed
50ยบC. This is normal and no cause for concern, although it does highlight the need for adequate ventilation around
the unit. We recommend that you do not place your integrated amplifier directly on a carpet.
mains lead and plug
All Chord equipment comes supplied with the correct mains lead and plug. This should be used at all times.
if you need to fit a plug for UK/Europe
Connect the blue wire to the neutral terminal
Connect the brown wire to the live terminal
Connect the yellow/green wire to the earth terminal
if you need to fit a plug for US/Canada
Connect the white wire to the neutral terminal
Connect the black wire to the live terminal
Connect the green to the earth terminal
earthing issues in Europe
In some European countries a hum may occur if your integrated/pre-amplifier is connected to mains sockets that do
not have an earth. If this is the case please ensure that:
1. Your integrated/pre-amplifier is connected via a multi-way mains block which contains an earth point at each
socket outlet. This is to ensure that the chassis metalwork of each item is connected together.
2. Use the connecting points on your Chord unit and connect to an available earth point.
3. We recommend that an earthing method for your building is implemented.
safety warnings
It is important that your integrated/pre-amplifier is earthed at all times via its own mains lead. Failure to do this may
be hazardous. The power supply components within the amplifier are designed to be operated at lethal voltages and
energy levels. Circuit designs that embody these components conform with applicable safety requirements. Precautions
must be taken to prevent accidental contact with power-line potentials. Do not connect grounded test equipment.
These units comply with EN 50081-1 and IEC 801/2
4


Product specificaties

Merk: Chord
Categorie: Receiver
Model: CPM 3350

Heb je hulp nodig?

Als je hulp nodig hebt met Chord CPM 3350 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Chord

Handleiding Receiver

Nieuwste handleidingen voor Receiver