Chief PAC527FW-KIT Handleiding

Chief Niet gecategoriseerd PAC527FW-KIT

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief PAC527FW-KIT (19 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/19

I N S T A L L A T I O N I N S T R U C T I O N S

PAC527

PAC527F

PAC527FC

PAC527FxP4

PAC527FxP6

PAC527F-KIT

PAC527CVR-KIT

PACPL1

In-Wall Box and Accessories

PAC527 Series

PAC527 Series Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively “Milestone”), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all accessories are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this accessory can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this accessory is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

accessory.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located in the accessory does not exceed

40 lbs (18.1 kg).

• Each PAC527 may hold up to 4 individual backplanes

(2 complete) and each individual backplane may hold a

maximum weight of 10 lbs (4.5 kg)

• A half backplane (after separation) may hold a

maximum weight of 5 lbs (2.3 kg).

WARNING: Use this accessory only for its intended use as

described in these instructions. Do not use attachments not

recommended by the manufacturer.

WARNING:

Never operate this accessory if it is damaged.

Return the accessory to a service center for examination and

repair.

WARNING: For indoor use only.

IMPORTANT ! : The PAC527 accessory is designed to be

mounted to either a 2" x 3" or 2" x 4" wood stud wall 16" on

center, or a 2" x 3"-25ga (minimum) or 2" x 4"-25ga (minimum)

steel studs wall.

NOTE: Spacings - Minimum spacings between the 120 Vac

power components and the A/V components shall be

maintained for safe operation of the equipment when

installed in accordance with the National Electric Code,

ANSI/NFPA 70.

NOTE: When selecting a Listed 120 Vac Receptacle for use as

the main power source for the PAC series boxes (to

power the A/V equipment), make sure that AC

Receptacle is rated at least 15A and it is used in the

building’s AC branch circuit that is connected to a

circuit breaker rated at least 15A. Do not connect more

than 12A from the Receptacle.

In the U.S., the equipment shall be installed per the applicable

requirements of the National Electrical Code, CSA C22.1.

In Canada, the equipment shall be installed per the applicable

requirements of the National Electrical Code, ANS/NFPA 70.

NOTE:

It is the installer’s responsibility to ensure that the

enclosure is bonded to the ground in the switch box, in

accordance with the National Electric Code, ANSI/NFPA

70 or Canadian Electrical Code, CSA C22.1. A green

grounding screw is provided in the enclosure for the

purpose, if required.

IMPORTANT ! : The PAC527 mounts are designed to

accommodate the following Chief power kits ONLY:

• PAC527P4-KIT

• PAC527P6-KIT

--SAVE THESE INSTRUCTIONS--

DIMENSION DRAWINGS are located at the end of these

Installation Instructions.

Installation Instructions PAC527 Series

ADDITIONAL SAFETY INSTRUCTIONS

SPECIFIC TO PAC527FxP4 / PAC527FxP6

READ ALL INSTRUCTIONS BEFORE USING THIS

PRODUCT!!!!

DANGER: TO REDUCE THE RISK OF

ELECTRIC SHOCK:

1. Always turn off power at source before installing the outlet.

WARNING: TO REDUCE THE RISK OF

BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO

PERSONS:

• Always turn off power at source before servicing or

removing the outlet.

• Do not use outdoors - For indoor use only.

• Route cables as shown in these installation

instructions.

• To disconnect, turn off power at source.

WARNING:RISK OF ELECTRIC SHOCK!

Make sure the outlet is properly grounded. See grounding

instructions.

CAUTION:This equipment must be installed

and assembled by qualified service personnel in accordance

with local building and electrical codes.

NOTE: Knockouts are provided for ease of installation. Any

unused knockouts that have been punched are to be

closed up with a metal plug.

Ambient Temperature - The manufacturer’s maximum ambient

temperature is 104°F (40°C) and minimum ambient

temperature is 30°F (-1°C) so that the installer is able to

determine acceptability of use of Accessories and components.

--SAVE THESE INSTRUCTIONS--

IMPORTANT ! : DIMENSION DRAWINGS are located at

the end of these Installation Instructions.

TABLE OF CONTENTS

IMPORTANT ! : DIMENSION DRAWINGS are located at the end of these Installation Instructions.

Product specificaties

Merk:	Chief
Categorie:	Niet gecategoriseerd
Model:	PAC527FW-KIT
Kleur van het product:	Wit
Breedte:	391.1 mm
Diepte:	11 mm
Hoogte:	590.9 mm
Montagewijze:	Schroef
Aantal:	1
Type product:	Frame elektrische behuizing