Chief NAV1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Chief NAV1 (9 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
CHIEF MANUFACTURING INC. 8802-000157 Rev C
1-800-582-6480 952-894-6280 FAX 952-894-6918 ©2007 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, SUITE 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 04/07
I N S T A L L A T I O N I N S T R U C T I O N S
NAV-1 Lens Support
The NAV-1 Lens Support is compatible with any RPA
projector mount. The NAV-1 readily adapts to the
following ScreenStar Conversion Lens from Navitar:
SSW08 and SST120.
NAV-2 Lens Support
The NAV-2 Lens Support is compatible with any RPA
projector mount. The NAV-2 will readily adapt to a
conversion lens that is not screw-mounted to the lens
support. The NAV-2 Lens Support can also be used on
projectors that have an inset lens.
NAV-1 LENS SUPPORT
NAV-2 LENS SUPPORT
BEFORE YOU BEGIN
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-
tion to the “Important Warnings and Cautions” on Page 2.
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
NAV
-
1
NAV
-
2
Instruction Instructions NAV-1
2
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow
the instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not
follow the corresponding instructions.
WARNING Improper installation can result in serious personal injury! Make sure that the
mounting surface can support a redundant weight factor five times the total weight of
the equipment. If not, reinforce the structure before installing the applicable lens
support on the projector.
WARNING Be aware of the potential for personal injury or damage to the unit if it is not
adequately mounted.
CAUTION Inspect the unit for shipping damage.
CONTENTS
TOOLS REQUIRED FOR INSTALLATION ................ 2
REFERENCE CHART............................................... 2
INSPECT NAV-1 PARTS BEFORE ASSEMBLY........ 3
Remove and Inspect the NAV-1............................. 3
NAV-1 INSTALLATION PROCEDURES.................... 4
Removing Projector from Ceiling Mount ................. 4
Attaching NAV-1 to RPA ........................................ 5
Installing and Adjusting Lens.................................. 6
Adjusting NAV-1 to Projector Lens ......................... 7
Pitch Adjustment ................................................ 7
Extension Adjustment......................................... 7
Lateral Shift Adjustment...................................... 7
Height Adjustment.............................................. 7
Adjustment Notes............................................... 7
INSPECT NAV-2 PARTS BEFORE ASSEMBLY........ 8
Remove and Inspect the NAV-2............................. 8
NAV-2 INSTALLATION PROCEDURES.................... 9
Installing and Adjusting Lens.................................. 9
TOOLS REQUIRED FOR
INSTALLATION
Phillips screwdriver
9/64” Allen wrench or Hex wrench
NOTE: Other tools may be required depending on the
method of installation.
REFERENCE CHART
Table 1 provides a reference chart to help you quickly
find the installation instructions you need.
Table 1. Installation Reference Chart
Model Product Name
Ref.
Pages
NAV-1 NAV-1 Lens Support 4 thru 7
NAV-2 NAV-2 Lens Support 8 and 9
Instruction Instructions NAV-1
3
INSPECT NAV-1 PARTS BEFORE ASSEMBLY
Remove and Inspect the NAV-1
1. Open the shipping container and remove the NAV-1
from the container.
2. Carefully inspect the NAV-1 for shipping damage. If
any damage is apparent, call your carrier claims
agent and do not continue with the assembly
procedure until the carrier has reviewed the damage.
NOTE: Read all assembly instructions before
starting assembly.
3. Carefully inspect all components for damage. See
Table 2, Figure 1, and Figure 2.
Figure 1. NAV-1 Lens Support
Table 2. NAV-1 Parts
ITEM PART NAME QTY
10 MAIN PLATE 1
20 FRONT ADJUSTABLE PLATE 1
30 SEMS SCREW, PAN, SELF TAPPING- , PHILLIPS 4
40 FRONT PLATE 1
50 1/4-20 X 3/4” CARRIAGE BOLT 1
60 KNOB 1
70 10-24 X 1-1/4” PHILLIPS HEAD MACHINE
SCREW BZ
2
80 10-24 X 5/8” PHILLIPS HEAD MACHINE
SCREW BZ (NOT SHOWN)4
90 #10 SAE FLAT WASHER BZ 4
Figure 2. NAV-1 Lens Support (Top View)
50
10
70
40
10
and
90
20
60


Product specificaties

Merk: Chief
Categorie: Projector accessoire
Model: NAV1

Heb je hulp nodig?

Als je hulp nodig hebt met Chief NAV1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projector accessoire Chief

Chief

Chief SLM248 Handleiding

18 November 2024
Chief

Chief SLM251 Handleiding

17 November 2024
Chief

Chief SLM255 Handleiding

17 November 2024
Chief

Chief SLM293 Handleiding

17 November 2024
Chief

Chief SLM3000 Handleiding

17 November 2024
Chief

Chief RPMAU Handleiding

17 November 2024
Chief

Chief SLM230 Handleiding

17 November 2024
Chief

Chief WM2I Handleiding

17 November 2024
Chief

Chief RSMD311 Handleiding

17 November 2024
Chief

Chief RPMA368 Handleiding

14 November 2024

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire