Chief HB49E Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Chief HB49E (1 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
8803-000006
HB
49E
V
IDEO
P
ROJECTOR
C
EILING
M
OUNT
for Eiki LC-SX4/L, LC-X4/L, Christie Digital Vivid Blue, Sanyo PLC-EF30L,
PLC-XF30L,
The Chief HB49E video projector ceiling mount is designed to provide a fast, simple and secure installation of your
projector. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The
HB49E mount also has positive registration lock so that the projector may be removed without losing projector mount
registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!
All components must be securely fastened to each other and to the ceiling, AND the ceiling
MUST be capable of supporting 5 times the total weight of the installation. If it cannot, the
ceiling MUST be reinforced.
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (6) M8 - 12mm BHSCS
(1) HB Left Mounting Bracket (6) M8 - Flatwasher
(1) HB Right Mounting Bracket (4) 5/16” Flange Nuts
(1) M5.Allen Wrench
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Locate the three threaded brass inserts on each side of the bottom of the projector.
3. Place the mounting brackets on the projector lining up the three mounting holes in the brackets with the three
threaded brass inserts in the bottom of the projector.
4. Using the six M8 12mm screws and flatwashers, screw them into the six threaded inserts in the bottom of the
projector using the allen wrench provided. Securely tighten all six mounting screws at this time.
5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If
not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical
installations. A third assistant is recommended.
7. With the help of your assistants, lift the projector and install it to the studs extending from the mounting plate. Be
sure the HB49E mounting plate is seated in the slots prior to releasing hand from handles. Tighten securely
using the 5/16” flange nuts.
For projector alignment see attached sheet.


Product specificaties

Merk: Chief
Categorie: Projector accessoire
Model: HB49E

Heb je hulp nodig?

Als je hulp nodig hebt met Chief HB49E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projector accessoire Chief

Chief

Chief SLM248 Handleiding

18 November 2024
Chief

Chief SLM251 Handleiding

17 November 2024
Chief

Chief SLM255 Handleiding

17 November 2024
Chief

Chief SLM293 Handleiding

17 November 2024
Chief

Chief SLM3000 Handleiding

17 November 2024
Chief

Chief RPMAU Handleiding

17 November 2024
Chief

Chief SLM230 Handleiding

17 November 2024
Chief

Chief WM2I Handleiding

17 November 2024
Chief

Chief RSMD311 Handleiding

17 November 2024
Chief

Chief RPMA368 Handleiding

14 November 2024

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire