Chief HB47E Handleiding
Chief
Projector accessoire
HB47E
Lees hieronder de 📖 handleiding in het Nederlandse voor Chief HB47E (2 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
8803-000005
HB47E
VIDEO PROJECTOR CEILING MOUNT
for EIKI LC-XT1, PROXIMA DP 9350, SANYO PLC XF20
The Chief HB47E video projector ceiling mount is designed to provide a fast, simple and secure installation of your
projector. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The
HB47E mount also has positive registration lock so that the projector may be removed without losing projector mount
registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!
All components must be securely fastened to each other and to the ceiling, AND the ceiling
MUST be capable of supporting 5 times the total weight of the installation. If it cannot, the
ceiling MUST be reinforced.
Unpack and check contents:
(1) (3)Deluxe ceiling mount housing assembly. M8 - 12mm bolt
(1) (2)Mounting bracket M8 - 25mm bolt
(4) (1)5/16” flange nuts M8 - 35mm bolt
(6) (4)M8 Flatwashers ½” Round Nylon Spacers
(1) Allen Wrench
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Place the mounting bracket on the projector lining up the four mounting holes.
3. Place (2) ½” Round Nylon Spacers, one on each side of the front of the projector between the projector and the
bracket. Start by hand (1) M8 - 12mm bolt and M8 flatwasher in the front center hole and (2) M8 – 25mm bolts
and M8 flatwashers in the front outer holes.
4. Use the remaining (2) ½” Round Nylon Spacers, stack them so they are 1” tall, lift the rear of the bracket just
enough to place them between the center hole in the bracket and the hole in the projector and place the (1) M8 –
38mm bolt and M8 flatwasher though the hole in the bracket and spacers and start treading the bolt in to the
treaded insert. Place the remaining (2) M8 – 12mm bolts and M8 flatwashers in the two rear holes in the bracket
and then snug using the proper size wrench. Securely tighten all six mounting bolts at this time.
5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If
not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
8803-000005
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical
installations. A third assistant is recommended.
7. With the help of your assistants, lift the projector and install it to the studs extending from the mounting plate. Be
sure the Sharp mounting plate is seated in the slots prior to releasing hand from handles. Tighten securely using
the 5/16” flange nuts.
For projector alignment see attached sheet.
Product specificaties
| Merk: | Chief |
| Categorie: | Projector accessoire |
| Model: | HB47E |
Heb je hulp nodig?
Als je hulp nodig hebt met Chief HB47E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Projector accessoire Chief
18 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
14 November 2024
Handleiding Projector accessoire
- Projector accessoire Sony
- Projector accessoire Casio
- Projector accessoire Panasonic
- Projector accessoire Auna
- Projector accessoire Barco
- Projector accessoire BenQ
- Projector accessoire Hitachi
- Projector accessoire InFocus
- Projector accessoire Manhattan
- Projector accessoire Nec
- Projector accessoire Nedis
- Projector accessoire Newstar
- Projector accessoire Peerless
- Projector accessoire Sanyo
- Projector accessoire Speaka
- Projector accessoire Viewsonic
- Projector accessoire Vogels
- Projector accessoire XGIMI
- Projector accessoire Omnitronic
- Projector accessoire Optoma
- Projector accessoire Sanus
- Projector accessoire Vision
- Projector accessoire Gabor
- Projector accessoire Lindy
- Projector accessoire Da-Lite
- Projector accessoire AV:link
- Projector accessoire Peerless-AV
- Projector accessoire Projecta
- Projector accessoire Chipolino
- Projector accessoire Konig & Meyer
- Projector accessoire Roadinger
- Projector accessoire Tempest
- Projector accessoire Premier Mounts
- Projector accessoire Gravity
- Projector accessoire Elite Screens
- Projector accessoire Kingpin Screens
- Projector accessoire Kanto
- Projector accessoire V7
- Projector accessoire Christie
- Projector accessoire Unicol
- Projector accessoire My Wall
- Projector accessoire Smart Media
Nieuwste handleidingen voor Projector accessoire
19 November 2024
19 November 2024
30 Juli 2024
29 Juli 2024
29 Juli 2024
29 Juli 2024
26 Juli 2024
26 Juli 2024
9 Juli 2024
9 Juli 2024