Chief HB32B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Chief HB32B (3 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
8803-000104
12/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
HB-32B
VIDEO PROJECTOR CEILING MOUNT
FOR DIGITAL PROJECTION TITAN SERIES,
The Chief HB32B video projector ceiling mount is designed to provide fast, simple and secure installation of the Barco
CLM10+. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The
HB32B mount also has positive registration lock so that the projector may be removed without losing projector mount
registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling be reinforced.MUST
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (3) M10 Washers, Flat
(1) Panasonic mounting bracket (3) M10 x 1.5 x 50mm, bolt
(4) 5/16” Flange Nuts (6) .5” x .257” x .625” nylon spacers
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Place the three 5/8” tall nylon spacers on the bottom of your projector and stack the second three on top of the
fist ones so they are two spacers tall.
3. Place the Barco custom mounting bracket over on these nylon spacers on the bottom of your projector lining up
with the three threaded inserts in the bottom of the projector with the three holes in the bracket.
4. Slide the (3) M10 washers, one on each (3) M10 x 50mm bolt and install them into the three threaded inserts in
the projector. Securely tighten all three mounting bolts at this time.
4. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.
If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended.
6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting
plate. Be sure the Panasonic mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange
nuts.
For projector alignment see attached sheet.


Product specificaties

Merk: Chief
Categorie: Projector accessoire
Model: HB32B

Heb je hulp nodig?

Als je hulp nodig hebt met Chief HB32B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projector accessoire Chief

Chief

Chief SLM248 Handleiding

18 November 2024
Chief

Chief SLM251 Handleiding

17 November 2024
Chief

Chief SLM255 Handleiding

17 November 2024
Chief

Chief SLM293 Handleiding

17 November 2024
Chief

Chief SLM3000 Handleiding

17 November 2024
Chief

Chief RPMAU Handleiding

17 November 2024
Chief

Chief SLM230 Handleiding

17 November 2024
Chief

Chief WM2I Handleiding

17 November 2024
Chief

Chief RSMD311 Handleiding

17 November 2024
Chief

Chief RPMA368 Handleiding

14 November 2024

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire