Chief HB012R Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Chief HB012R (1 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
8803-000086 Rev. A
01/07/08
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
HB-012R
VIDEO PROJECTOR CEILING MOUNT
FOR RUNCO VX-22 ,D
The Chief HB012R video projector ceiling mount is designed to provide fast, simple and secure installation of the
Runco VX-22D. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image
alignment. The HB012R mount also has positive registration lock so that the projector may be removed without losing
projector mount registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling be reinforced.MUST
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (6) #10 washers, flat
(1) Runco mounting bracket (6) 10 - 32 x 3/8” Screws, PH, Phillips
(4) 5/16” Flange Nuts (6) 10 - 32 x 2” Screws, PH, Phillips
(6) Nylon Spacer .50” OD X .26”ID X 1.625 TL (6) 08-32 x ¼” Screws, PH, Phillips
(6) M6 Washers, Flat (6) M6 x 16mm Screws, PH, Phillips
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Place the (6) Nylon Spacers over the six threaded inserts in the bottom of the projector.
3. Place the Runco mounting bracket on the six nylon spacers on the bottom of the projector so the hooks are
facing the back and the six holes in the bracket line up the six threaded inserts in the bottom of the projector.
4. Slide the (6) #10 washers one on each (6) 10-32 x 2” Screw and install them into the six threaded inserts in the
projector. Securely tighten all six mounting screws at this time. (The shorter 10-32 x 3/8” screws are only
used if you install with the auto scope and the 2” standoff brackets that are supplied with your projector.)
5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.
If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended.
6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting
plate. Be sure the Runco mounting plate is seated in slots. using the (4) 5/16” flange nuts.Tighten securely
For projector alignment see attached sheet.


Product specificaties

Merk: Chief
Categorie: Projector accessoire
Model: HB012R

Heb je hulp nodig?

Als je hulp nodig hebt met Chief HB012R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projector accessoire Chief

Chief

Chief SLM248 Handleiding

18 November 2024
Chief

Chief SLM251 Handleiding

17 November 2024
Chief

Chief SLM255 Handleiding

17 November 2024
Chief

Chief SLM293 Handleiding

17 November 2024
Chief

Chief SLM3000 Handleiding

17 November 2024
Chief

Chief RPMAU Handleiding

17 November 2024
Chief

Chief SLM230 Handleiding

17 November 2024
Chief

Chief WM2I Handleiding

17 November 2024
Chief

Chief RSMD311 Handleiding

17 November 2024
Chief

Chief RPMA368 Handleiding

14 November 2024

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire