Chief FHB5164 Handleiding

Chief Niet gecategoriseerd FHB5164

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief FHB5164 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

Flat Panel Adapter

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

FHB-5164

FHB-5164 Installation Instructions

DISCLAIMER

Legrand AV and its affiliated corporations and subsidiaries |

(collectively “Legrand AV”), intend to make this manual |

accurate and complete. However, Legrand AV makes no claim |

that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Legrand AV |

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Legrand AV |

assumes no responsibility for accuracy, completeness or

sufficiency of the information contained in this document.

Chief® is a registered trademark of Legrand AV Inc.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the FHB-5164 accessory up to

(and including) the display does not exceed the weight

capacity of the mount to which it is attached.

WARNING: Use this accessory only for its intended use as

described in these instructions. Do not use attachments not

recommended by the manufacturer.

WARNING: Never operate this accessory if it is damaged.

Return the accessory to a service center for examination and

repair.

WARNING: Do not use this product outdoors.

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

Installation Instructions FHB-5164

TOOLS / PARTS FOR INSTALLATION

A (2)

[Adapter

Bracket]

B (4)

M8 x 35mm

C (4)

M8x12mm

TV mount’s

installation

instructions

ASSEMBLY AND INSTALLATION

NOTE: The FHB-5164 is designed to be used with any Chief®

mount with flat upright brackets to add an offset up to

3.43" (87.2mm) from non-centered M8 VESA patterns.

It CANNOT be used with mounts using mounting

buttons.

1. Install mount to wall following mount’s installation instruction

up to the point of installing the display to the mount.

IMPORTANT ! : Depending on hole depth, a different

length of screw (not provided) may be needed rather than

the M8 x 35mm screws (B) to attach brackets to display.

2. Use M8 x 35mm (or appropriate length) Phillips pan

machine screws (B) to attach adapter brackets (A) to back

of display. (See Figure 1)

Figure 1

3. Use four M8 x 12mm Phillips pan machine screws (C) to

secure mount’s interface brackets to adapter brackets (A).

(See Figure 2)

NOTE: Some models will need to have interface brackets

assembled prior to connection to brackets.

Figure 2

4. Complete the installation following the mount installation

instructions.

(B) x 4

(A) x 2

(Low hole pattern shown)

(A) x 2

(Chief® XSD1U interface

brackets [not included]

shown)

(High hole pattern shown)

Product specificaties

Merk:	Chief
Categorie:	Niet gecategoriseerd
Model:	FHB5164
Kleur van het product:	Zwart
Breedte:	70 mm
Diepte:	9.6 mm
Hoogte:	508 mm
Gewicht verpakking:	2720 g
Materiaal:	Metaal
Compatibele producten:	65” Samsung Flip2