Chief CPA265 Handleiding

Chief Projector accessoire CPA265

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief CPA265 (4 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

CPA Pin Connector Adapter

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

CPA265

CPA265 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively “Milestone”), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Do not use this product outdoors.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the CPA265 does not exceed 50

lbs (22.68 kg).

• The weight capacity of the CPA265 may be limited to

the lowest weight capacity of any other component

located between the CPA265 and the supporting

structure.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

IMPORTANT ! : CPA265 is intended for use with UL Listed

CPA Series pipes: CPA018, CPA024, CPA036, CPA048,

CPA060, CPA072, CPA084, CPA096, CPA108, CPA120.

IMPORTANT ! : The CPA265 adapter is compatible with

projector mounts with a 1 1/2" NPT threaded opening.

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

Installation Instructions CPA265

PARTS FOR INSTALLATION

A (1)

[CPA265]

B (2)

M6x16mm C (2)

M6x16mm

F (1)

(security)

D (2)

E (2)

INSTALLATION

Installing to a CPA Pipe

1. Making sure holes are aligned on CPA265 (A) and CPA

column (not included), lift CPA265 (A) into bottom opening

of CPA column. (See Figure 1)

2. Install either one M6x16 button head screw (B) or security

screw (C) through M6 lock washer (D) and M6 flat washer

(E) into hole on side of CPA pipe where the adapter plate on

CPA265 is located. (See Figure 1)

3. On the opposite side of CPA pipe, use the other M6x16

button head screw (B) or security screw (C), an M6 lock

washer (D) and an M6 flat washer (E) to secure CPA265 to

CPA column. (See Figure 1)

Figure 1

4. Use “L”-shaped M6 hex key (F) to tighten bottom bolt. (See

Figure 1)

Install to Projector Mount

IMPORTANT ! : The CPA265 adapter is compatible with

projector mounts with a 1 1/2" NPT threaded opening.

1. Thread projector mount (not included) onto the CPA265 (A)

until hand tight.

2. Turn projector mount clockwise or counter-clockwise until

front of mount is facing target.

3. Secure projector mount to pipe by turning set screw with a

5/32” hex key until tight.

CAUTION: DO NOT OVERTIGHTEN! Over-tightening of

set screw can damage threads on pipe.

Figure 2

4. Turn security screw (access from bottom of projector mount)

(See Figure 3) using a Phillips screwdriver until set screw

cannot be seen through set screw access hole in projector

mount. (See Figure 3)

Figure 3

CPA pipe

(not included)

(B) or (C)

hole on side

of adapter plate

(D) x 2

(E) x 2

(A)

underneath view

Set screw

access hole

x 1

(example)

(A)

projector mount

(bottom view)

x 1

Security screw

Product specificaties

Merk:	Chief
Categorie:	Projector accessoire
Model:	CPA265
Kleur van het product:	Zilver
Hoogte:	45 mm
Maximale gewichtscapaciteit:	22.68 kg
Certificering:	UL Listed, TÜV
Merkcompatibiliteit:	Chief
Code geharmoniseerd systeem (HS):	85299097