Chief CPA264 Handleiding

Chief Projector accessoire CPA264

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief CPA264 (4 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

NPT Female to CPA Female Coupling

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

CPA264

CPA264 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

DEFINITIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary product designed by Chief® to mount the projector or

display.

ACCESSORY: An ACCESSORY is any product designed by

Chief® to complement the primary mounting system either by

mounting any supporting components or enhancing the

mounting capabilities of the primary mounting system.

COMPONENT: A COMPONENT is any secondary product to

be mounted to an accessory, i.e. speakers, CPU’s, cameras,

tablets, additional displays.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all mounts/accessories

are properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this accessory can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this accessory is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

accessory.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located within the mounting system of the

CPA264 does not exceed 500 lbs (226.8 kg).

•The weight capacity of the CPA264 may be

LIMITED to the lowest weight capacity of any other

component or accessory used within the mounting

system.

WARNING: Use this accessory only for its intended use as

described in these instructions. Do not use attachments not

recommended by the manufacturer.

WARNING: Never operate this accessory if it is damaged.

Return the accessory to a service center for examination and

repair.

WARNING: Do not use this product outdoors.

NOTE: Accessory is intended to be used with the UL Listed

CPA Extension Column Series and a 1-1/2" NPT or

NPSM following ANSI/ASME B1.20.1 (Schedule 40,

0.154" minimum thickness steel or aluminum-ASTM

B221) threaded extension column (not included).

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

0.375

9.5

0.34

8.7

SET SCREW HOLE

2.25

57.2

1-1/2" NPT COLUMN

(NOT INCLUDED)

CPA COLUMN

(NOT INCLUDED)

DIMENSIONS: INCHES

[MILLIMETERS]

Installation Instructions CPA264

TOOLS REQUIRED FOR INSTALLATION / PARTS

5/32"

(included)

A (1)

[CPA264 Coupler]

F (1)

5/32"

1/2"

nut driver

1/2"

B (4)

5/16-18 x 1" D (4)

5/16"

C (4)

5/16"

E (1)

5/16-18 x 1/2"

Hardware bag

INSTALLATION

IMPORTANT ! : The following procedure assumes that a

1-1/2" NPT or NPSM following ANSI/ASME B1.20.1

(Schedule 40, 0.154" minimum thickness steel or

aluminum-ASTM B221) threaded extension column (not

included) has been properly installed following

instructions provided with extension column.

NOTE: The CPA264 adapts a

1-1/2" NPT or NPSM following

ANSI/ASME B1.20.1 (Schedule 40, 0.154" minimum

thickness steel or aluminum-ASTM B221) threaded

extension column (not included); to a UL Listed CPA

extension column (not included).

1. Thread CPA264 (A) onto

a 1-1/2" NPT or NPSM following

ANSI/ASME B1.20.1 (Schedule 40, 0.154" minimum

thickness steel or aluminum-ASTM B221) threaded

extension column (not included)

until tight, with a minimum

of four threads engaged. (See Figure 1)

2. Install and tighten one 5/16" x 1/2" set screw (E) through

CPA264 and against column. (See Figure 1)

Figure 1

NOTE: Installation of hex head self-tapping screws will be

easier when screws are carefully aligned with holes in

extension column, and a drill and nut driver is used. If a

drill will NOT be used, a small amount of pressure will

be needed to get the self-tapping screws started.

3. Install UL Listed CPA extension column

(not included)

following instructions included with extension column and

using four 5/16" x 1" self-tapping screws (B) through four

5/16" split lock washers (C), and four flat washers (D). (See

Figure 1)

(E) x 1

CPA extension

column (not

included)

1-1/2" NPT or

NPSM extension

column (not

included)

(B) x 4

(D) x 4

Product specificaties

Merk:	Chief
Categorie:	Projector accessoire
Model:	CPA264
Kleur van het product:	Zwart
Maximale gewichtscapaciteit:	226.7 kg
Certificering:	UL
Materiaal:	Staal
Code geharmoniseerd systeem (HS):	85299097