Cavalry CAXM Handleiding

Cavalry Externe harde schijf CAXM

Lees hieronder de 📖 handleiding in het Nederlandse voor Cavalry CAXM (5 pagina's) in de categorie Externe harde schijf. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
Note:
To reduce static discharge, do not
assemble while on a carpeted
surface.
Handle hard drives on the sides
only. Do not touch any pins or
connectors.
Assembly Guide Thank you for purchasing the CAXH user-congured enclosure!
The CAXH enclosure is elegant, cost-effective, and primarily
designed to protect your Hard Disk from shock. The sleek ABS
plastic enclosure tightly conforms to the shape of your Hard Disk
in order to divert the shock of accidental collisions and direct it
towards the enclosure itself; safely away from the delicate Hard
Disk. This requires a careful assembly process in order to pro-
vide maximum protection to your data. Please read the entire
guide before beginning the assembly!
EN-CAXH-B
Enclosure
EN-CAXH-B
1
Remove the box contents. Put the two panels off to the side. The
panel with the circuit board will be refered to as Panel A. The lid
will be referred to as Panel B. Take this moment to count all of the
channels on Panel A. Notice that half of them face inwards. Now
count the tabs on Panel B. These are the main mechanisms that hold
your CAXH together. They must be aligned precisely!
You will need (not included):
Screwdriver with Philips head
1 SATA hard drive
Channels
Channels
EN-CAXH-B
2
ENCLOSURETHE EN-CAXH-B ASSEMBLY GUIDE
1STEP ONE
AB
Once you have tested your internal hard drive, then we can prepare
to insert it into the enclosure. Turn your 3.5” SATA Hard Disk
upside down, so that it’s circuit board is facing up. Slide it into
Panel A slowly, at a 45o angle, until the data port mates with the
connector on Panel A.
2STEP TWO
As you place the hard drive into the enclosure, watch the retainer
pins on the right side of panel A. Once they have lined-up with
the screw-holes on the side of your HDD, push the back end of
the drive downwards, into the oor of Panel A. Do this slowly and
rmly, making sure that all of the retainer pins on Panel A line up
with the screw-holes on the HDD.
EN-CAXH-B
3
ENCLOSURETHE EN-CAXH-B ASSEMBLY GUIDE
3STEP THREE
Use your thumbs to push around the edge of the drive until you
feel that the drive is well-mated with Panel A. Then, insert the two
HDD screws into Panel A, and beyond until they meet with the
screw-holes of the HDD. You may have to push the drive inwards,
towards the board on Panel A, in order to line the holes up. Tighten
the screws slowly, but make sure not to indent the plastic.
Finger-tight will do.
4STEP FOUR
Screwhole
Screwhole
Retainer Pins

Product specificaties

Merk: Cavalry
Categorie: Externe harde schijf
Model: CAXM

Heb je hulp nodig?

Als je hulp nodig hebt met Cavalry CAXM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Externe harde schijf Cavalry

Cavalry

Cavalry CAXM Handleiding

24 Oktober 2022

Handleiding Externe harde schijf

Nieuwste handleidingen voor Externe harde schijf

Sabrent

Sabrent EC-TFNE Handleiding

20 December 2024
Icy Box

Icy Box IB-200T-C3 Handleiding

18 December 2024
ADATA

ADATA SC685 Handleiding

30 November 2024
Intenso

Intenso Memory Center 2 Handleiding

18 November 2024
Silicon Power

Silicon Power Bolt B75 Handleiding

18 November 2024
ADATA

ADATA HD830 Handleiding

17 November 2024
ADATA

ADATA AHV620S Handleiding

17 November 2024
ADATA

ADATA HV300 Handleiding

17 November 2024
Icy Box

Icy Box IB-1121-C31 Handleiding

16 November 2024
Icy Box

Icy Box IB-AC603b-U3 Handleiding

16 November 2024