Casio G-Shock GMW-B5000 Handleiding

Casio Smartwatch G-Shock GMW-B5000

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Casio G-Shock GMW-B5000 (22 pagina's) in de categorie Smartwatch. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
Contents
Before Getting Started...
Indicators
Navigating Between Modes
Solar Charging
Useful Features
Time Adjustment
Time Adjustment Using a Time Signal
Overview
Appropriate Signal Reception Location
Time Signal Reception Ranges
Auto Time Signal Receive
Manual Time Signal Receive
Receive Level Indicator
Signal Reception Precautions
Using Watch Operations to Adjust the Time
Setting
Using the Watch in a Medical Facility or
Aircraft
Using Mobile Link with a Mobile
Phone
Getting Ready
A
Install the required app on your phone.
B
Configure Bluetooth settings.
C
Pair the watch with a phone.
Auto Time Adjustment
Configuring Reminder Settings
Configuring World Time Settings
Phone Finder
Configuring Watch Settings
Changing the Home City Summer Time Setting
Checking the Watch Charge Level
Recording Your Current Location (TIME &
PLACE)
Connection
Connecting with a Phone
Disconnecting from a Phone
Unpairing
If you purchase another phone
MA2002-ED Β© 2018 CASIO COMPUTER CO., LTD.
Reminders
Recording an Appointment or Anniversary
Checking Reminder Notifications
World Time
Checking World Time
World Time City Setting
Swapping Your Home City Time and World
Time
Alarms and Hourly Time Signal
Configuring Alarm Settings
Enabling/Disabling an Alarm or the Hourly
Time Signal
Stopping an Alarm
Determining an Alarm’s On/Off Status
Stopwatch
Measuring Elapsed Time
Measuring a Split Time
Timing the First and Second Place Finishers
Timer
Setting the Time
Using the Timer
Light
Illuminating the Display Manually
Auto Light
Configuring the Auto Light Setting
Specifying the Illumination Duration
Other Settings
Switching between 12-hour and 24-hour
Timekeeping
Changing the Date Display Format
Specifying the Day of the Week Language
Enabling the Button Operation Tone
Configuring Power Saving Function Settings
Returning the Watch to Its Factory Default
Settings
Moving to Another Time Zone
Other Information
City Table
Summer Time Table
Supported Phones
Specifications
Mobile Link Precautions
Copyrights and Registered Copyrights
Troubleshooting
Operation Guide 3459/3461
1
Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Note
●The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
Indicators
β‘  β‘‘
β‘₯
⑦
⑧
β‘£
β‘€
β‘’
β‘ͺ
β‘©
⑨
Aγ€€Displayed while Power Saving is enabled.
Bγ€€Displayed while Auto Light is enabled.
Cγ€€Displayed after time adjustment using
time signal reception or connection with a
phone was successful.
●The [RCVD] indicator will disappear in
the cases below.
γƒΌAfter you use watch operations to
change Home City settings (time and
date, city, summer time)
γƒΌAfter the watch switches between
standard time and summer time
γƒΌAfter a time signal receive operation
fails
γƒΌAfter a phone-based time adjustment
operation fails
Dγ€€Displayed while there is connection
between the watch and a phone.
Eγ€€Displayed during p.m. times while 12-hour
timekeeping is being used.
Fγ€€Displayed while the watch is indicating
summer time.
Gγ€€Displayed while battery power is low
Hγ€€Displayed while an alarm is turned on.
Iγ€€Displayed while the hourly time signal is
enabled.
Jγ€€Displayed while the operation tone is
muted.
Kγ€€Displayed while the snooze alarm is
enabled.
Navigating Between Modes
Press (C) to cycle between modes.
●In any mode, hold down (C) for about one
second to enter the Timekeeping Mode.
C
C
C
C
C
World Time Mode
Alarm Mode
Timer Mode
Stopwatch Mode
Timekeeping Mode
●Connecting with a Phone
Hold down (C) for about three seconds to
establish a connection with a phone.
●To disconnect, press any button.
CAfter connectionBefore connection
Any button
Solar Charging
This watch runs on power supplied from a
rechargeable (secondary) battery that is
charged by a solar panel. The solar panel is
integrated into the face of the watch, and
power is generated whenever the face is
exposed to light.
●Charging the Watch
When you are not wearing the watch, put it in
a location where it is exposed to bright light.
While you are wearing the watch, make sure
that its face (solar panel) is not blocked from
the light by the sleeve of your clothing. Power
generation efficiency is reduced even when
the face of the watch is blocked only partially.
NOYES
Important!
●Depending on light intensity and local
conditions, the watch may become hot
to the touch when exposed to light for
charging. Take care to avoid burn
injury after charging. Also, avoid
charging the watch under high-
temperature conditions like the ones
described below.
γƒΌOn the dashboard of a vehicle
parked in the sun
γƒΌNear an incandescent light bulb or
other source of heat
γƒΌUnder direct sunlight or in other hot
areas for long periods
Operation Guide 3459/3461
2
●Low Battery
A low battery will cause [LOW] to flash and will
disable the functions below.
●Time signal reception
●Illumination
●Sounds (alarms, etc.)
●Connection with a phone
If the charge level drops even further, [CHG]
will flash. If this happens, all functions are
disabled.
●Dead Battery
The digital display will go blank if the battery
goes dead. Memory data is lost, and watch
settings are returned to their initial factory
defaults.
Important!
●Should the battery go low or go dead,
expose the face (solar panel) to light as
soon as possible.
●Exposing the watch to light while its
battery is dead will cause [CHG] to
start flashing. Keep the watch exposed
to light until the current time appears on
the display.
Note
●If [R] is flashing, it means that all
functions, except for timekeeping, are
disabled due to high momentary
battery power consumption.
●Charging Time Guidelines
The table below shows guidelines for
approximate charging times.
Charging Times Required for 1 Day of
Operation
Light Intensity Approximate Charging Time
High
p
Low
A8 minutes
B30 minutes
C48 minutes
D8 hours
Times Required to Achieve Next Charge
Level
3459
Light Intensity
Approximate Charging Time
Charge Level
1
Charge Level
2
High
p
Low
A3 hours 45 hours
B10 hours 168 hours
C16 hours 270 hours
D208 hours -
3461
Light Intensity
Approximate Charging Time
Charge Level
1
Charge Level
2
High
p
Low
A3 hours 45 hours
B10 hours 169 hours
C16 hours 274 hours
D210 hours -
Charge Level 1 :
Time from dead battery until watch operation
starts.
Charge Level 2 :
Time from watch operation start until a full
charge.
Light Intensity
Aγ€€Sunny day, outdoors (50,000 lux)
Bγ€€Sunny day, near a window (10,000 lux)
Cγ€€Overcast day, near a window (5,000 lux)
Dγ€€Indoor fluorescent lighting (500 lux)
Note
●Actual charging time depends on the
local charging environment.
●Power Saving Function
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the display to go blank, and the
watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven
days, the watch will enter Level 2 power
saving.
Power Saving Level 1 :
Digital display goes blank to save power. The
watch can connect with a phone at this level.
Power Saving Level 2 :
Digital display goes blank to save power. All
functions are disabled.
Recovering from Power Saving Operation
Use one of the operations below to exit power
saving.
●Press any button.
●Move the watch to a bright location.
●Trigger auto light by angling the watch
towards your face.
Note
●The watch will not enter power saving
in the cases below.
γƒΌAlarm Mode
γƒΌWhile in the Stopwatch Mode
γƒΌWhile in the Timer Mode
●You can enable or disable Power
Saving.
lConfiguring Power Saving
Function Settings
●Note that the watch also may enter
power saving if its face is blocked from
light by your sleeve while you are
wearing it.
Useful Features
Pairing the watch with your phone makes a
number of the watch’s features easier to use.
Auto time adjustment
lAuto Time Adjustment
12:30
Operation Guide 3459/3461
3


Product specificaties

Merk: Casio
Categorie: Smartwatch
Model: G-Shock GMW-B5000

Heb je hulp nodig?

Als je hulp nodig hebt met Casio G-Shock GMW-B5000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Smartwatch Casio

Handleiding Smartwatch

Nieuwste handleidingen voor Smartwatch