Casio DQ-970 Handleiding

Casio Klok DQ-970

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio DQ-970 (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Operation Guide DQ-970
1
MA0506-EA
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes,
seconds)
Day of the week
Current
temperature
Current
humidity
Date
(month - day)
PM
indicator
Alarm time Snooze on
indicator
Alarm on
indicator
Alarm Off Snooze Alarm On
SNZ
ON
OFF
RESETINVALID
RESETINVALID
SET°C/°F
SET°C/°F
ILLUSTRATION
SET°C/°F
Press + to
increase
the flashing
digits.
Press to
decrease
the flashing
digits.
GENERAL GUIDE
11
11
1SNOOZE/LIGHT button
Press this button to illuminate the display for about five seconds.
Pressing this button while the alarm is sounding stops the alarm.
22
22
2Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
33
33
3+ / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
44
44
4°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
55
55
5SET button
Use this button when setting the current time.
66
66
6RESET button
Press this button to reset the clock after replacing its batteries.
Buttons marked “INVALID” have no function.
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
12-hour/24-hour
Timekeeping Screen
Time Setting ScreenMonth and Day
Setting Screen
Year Setting Screen
Normal Timekeeping Screen
2. While the screen you want is displayed, use the + and buttons (3) to change the flashing digits.
Holding down + or changes the flashing digits at high speed.
You can set the year in the range of 2000 to 2039. The day of
the week is set automatically in accordance with the date
setting.
Pressing + or while the Time Setting Screen is on the display
causes the seconds count to be reset to 00.
Each press of + or while the 12-hour/24-hour Timekeeping
Screen is on the display toggles between 12-hour and 24-hour
timekeeping.
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
Operation Guide DQ-970
2
USING THE ALARM
The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to
select the snooze alarm feature.
Setting the Alarm Time
Use the + and buttons (3) to set the alarm time.
Pressing the + and buttons (3) causes the alarm time to appear
in place of the date on the display.
Holding down + or changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze
feature.
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON
or SNZ.
The light also turns on for the first four seconds that the alarm sounds.
The alarm sound changes over four levels as it sounds.
Stopping the Alarm
When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.
To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.
USING THE LIGHT
Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark.
Important!
Overuse of the light can shorten battery life.
THERMOMETER FUNCTIONS
A built-in sensor measures temperature and shows the measured value on the display.
The temperature display shows LO for temperatures below 50°C (58°F) and HI for temperatures above
70°C (158°F).
Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
Push the °C/°F button (4) to select either Celsius (°C) or Fahrenheit (°F).
°C/°F button (4)
°C
°F
Celsius (°C) Fahrenheit (°F)
SET°C/°F
Press
+
to
change the
alarm time
setting.
Press
to
change the
alarm time
setting.
Alarm Mode selector
OFF
Description
The alarm sounds at the preset time for one minute, and up to seven more times every
five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT button
(1), the alarm sounds again five minutes later.
The indicator flashes on the display to indicate that the snooze feature is activated.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
SNZ
ON
HYGROMETER FUNCTIONS
A built-in sensor measures humidity and shows the measured value on the display.
The humidity display shows LO for humidity below 10% and HI for humidity above 90%.
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove all of the old batteries.
3. Load a full set of new batteries. Make sure that their positive (+) and negative () ends face in the correct
directions. If you load batteries incorrectly, they can burst and damage the clock.
4. Press the RESET button (6). Be sure to press the RESET button (6) after replacing batteries.
5. Replace the battery compartment cover.
Battery precautions
Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician
immediately.
Be sure to load the batteries with their positive (+) and negative () ends facing correctly.
Never mix old and new batteries, or batteries of different brands.
Never charge the batteries that come with the clock.
Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
Replace the batteries at least once a year, even if the current batteries are working properly.
The batteries that come with the clock lose some of their power during transport and storage.


Product specificaties

Merk: Casio
Categorie: Klok
Model: DQ-970

Heb je hulp nodig?

Als je hulp nodig hebt met Casio DQ-970 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Klok Casio

Casio

Casio DQ-981 Handleiding

15 Augustus 2022
Casio

Casio DQ-980 Handleiding

16 Augustus 2022
Casio

Casio DQ-745S Handleiding

17 Augustus 2022
Casio

Casio DQD-120B Handleiding

16 Augustus 2022
Casio

Casio DQ-982N Handleiding

16 Augustus 2022
Casio

Casio DQD-105 Handleiding

16 Augustus 2022
Casio

Casio DQ-747 Handleiding

16 Augustus 2022
Casio

Casio DQ-970 Handleiding

16 Augustus 2022
Casio

Casio DQ-950S Handleiding

15 Augustus 2022
Casio

Casio DQ-542 Handleiding

2 September 2022

Handleiding Klok

Nieuwste handleidingen voor Klok