Casio DQ-584 Handleiding
Lees hieronder de đź“– handleiding in het Nederlandse voor Casio DQ-584 (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Operation Guide DQ-584/584B
ILLUSTRATION
•A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
•Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes)
Current temperature
Date
(month – day)
PM indicator Alarm indicator
Alarm time
Snooze on indicator
Alarm on indicator
Alarm Off HR (MONTH) or MIN (DATE)
button depressed
Snooze Alarm On
GENERAL GUIDE
11111 SNOOZE/LIGHT button
•Press this button to illuminate the display for about three seconds.
•Pressing this button while the alarm is sounding stops the alarm.
22222 12 • 24 HR (YEAR) button
•Press this button to toggle between 12-hour and 24-hour timekeeping.
•Pressing this button while “CALENDAR” is selected by the advances the year setting.Mode switch 5
33333 MIN (DATE) button
•Pressing this button while “TM” is selected by the advances the minute setting.Mode switch 5
•Pressing this button while “CALENDAR” is selected by the advances the day setting.Mode switch 5
PM indicator
Hour Minutes
Press to toggle between
12-hour and 24-hour
timekeeping.
Press to advance the
minute setting.
Press to advance the
hour setting.
Year
Month Day
Press to advance the
year setting.
Press to advance the
day setting.
Press to advance the
month setting.
44444 HR (MONTH) button
•Pressing this button while “TM” is selected by the advances the hour setting.Mode switch 5
•Pressing this button while “CALENDAR” is selected by the advances the month setting.Mode switch 5
55555 Mode switch
NORMAL: For normal use
AL: For adjusting the alarm setting
TM: For adjusting the time setting
CALENDAR: For adjusting the date setting
66666 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
77777 °C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
88888 Battery
SETTING THE CLOCK
1. Slide the Mode switch 5 to
“TM”. This causes the current
time to flash on the display.
2. Use the 12 • 24 HR (YEAR)
button , 2MIN (DATE) button
3 4, and HR (MONTH) button
to set the time. Holding down
the MIN (DATE) button 3 or
HR (MONTH) button 4
changes the corresponding
setting at high speed.
•Make sure you set the correct
am/pm time if you are using 12-
hour timekeeping. The PM
indicator indicates PM times,
while nothing is indicated for AM
times.
•The seconds count reverts to 00
automatically whenever you finish
adjusting the minute setting.
3. Slide the Mode switch 5 to
“CALENDAR”. This causes the
current date to flash on the
display.
4. Use the 12 • 24 HR (YEAR)
button ,2 MIN (DATE) button
3 4, and HR (MONTH) button
to set the date. Holding down
any button advances the
corresponding setting at high
speed.
•You can set the year in the range
of 1990 to 2030.
5. Slide the Mode switch 5 to “NORMAL”. This will
cause the figures on the display to stop flashing.
1
MA0507-EA
Operation Guide DQ-584/584B
USING THE ALARM
The alarm sounds when the current time reaches the alarm time. The face illuminates for the first 5 seconds of the
alarm operation as well. The alarm tone alternates between two levels.
You can also use the to select the snooze alarm feature. Alarm Mode selector 6
Setting the Alarm Time
1. Slide the Mode switch 5 to
“AL”. This causes the alarm time
setting to flash on the display.
2. Use the 12 • 24HR (YEAR)
button ,2 MIN (DATE) button
3 4, and HR (MONTH) button
to set the alarm time. Holding
down the MIN (DATE) button 3
or HR (MONTH) button 4
changes the corresponding
setting at high speed.
•Make sure you set the correct
am/pm time if you are using 12-
hour timekeeping. The PM
indicator indicates PM times,
while nothing is indicated for AM
times.
3. Slide the Mode switch 5 to “NORMAL”. This will cause
the figures on the display to stop flashing.
4. Turning the Alarm On and Off
Use the on the top of the clock Alarm Mode selector 6
to turn the alarm on and off, and to select the snooze
feature.
Alarm Mode selector Description
The alarm sounds at the preset time for one minute. You can stop the alarm by
pressing the . The snooze feature will cause the alarm toSNOOZE/LIGHT button 1
sound again about five minutes after it stops. A indicator flashes on the display
during the period between alarms.
•
If you keep stopping the alarm manually by pressing the SNOOZE/LIGHT button
11
11
1
The alarm will sound again, about five minutes after you stop it.
•If the alarm is not stopped manually
The alarm will sound three times for one minute, at five-minute intervals. After that the
snooze feature will be cancelled automatically.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
SNZ
ON
OFF
Hour Minutes
Press to toggle between
12-hour and 24-hour
timekeeping.
Press to advance the
alarm time minute setting.
Press to advance the
alarm time hour setting.
USING THE LIGHT
Hold down the SNOOZE/LIGHT button 1 to illuminate the display. The light will go out automatically after about
three seconds, even if you keep the button depressed.
Important!
•Overuse of the light can shorten battery life.
THERMOMETER FUNCTIONS
A built-in sensor measures temperature and shows the measured value on the display.
Temperature Measurements
• ° °The temperature display shows “LO” for temperatures below –19.5 C (–3.0 F) and “HI” for temperatures above
70 F).°C (158°
• ° ° ° °Though temperature readings are displayed up to 0 C (32 F) and greater than 41 C (105 F), note that such
readings actually are outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
•Push the °C/ °F button 7 to select either Celsius (°C) or Fahrenheit (°F).
Celsius ( C) Fahrenheit ( F)° °
° °C/ F button ( )7
BATTERY REPLACEMENT
Replace the battery whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove the old battery.
3. Load a new battery. Make sure that the positive (+) and negative (–) ends of the battery are facing correctly. An
incorrectly loaded battery can burst and damage the clock.
4. Replace the battery compartment cover.
Battery precautions
•Keep batteries out of the reach of small children. If a battery is swallowed accidentally, contact your physician
immediately.
•Be sure to load the battery with its positive (+) and negative (–) ends facing correctly.
•Never charge the battery that comes with the clock.
•Should a battery ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
•Replace the battery at least once a year, even if the current battery is working properly.
•The battery that comes with the clock loses some power during transport and storage.
•The light also turns on for the first five seconds that the alarm sounds.
Stopping the Alarm
•When alarm is sounding, press the to stop it. When the snooze feature is turned on,SNOOZE/LIGHT button 1
the alarm will sound again in about five minutes.
•To turn off the snooze feature, slide the Alarm Mode selector 6 to OFF.
Testing the alarm
•While the mode switch setting is “ ”NORMAL , hold down the HR (MONTH) button 4 and MIN (DATE) button 3
at the same time to sound the alarm. All of the display s digital segments will appear at this time. Release the’
buttons to stop the alarm.
2
Product specificaties
| Merk: | Casio |
| Categorie: | Klok |
| Model: | DQ-584 |
Heb je hulp nodig?
Als je hulp nodig hebt met Casio DQ-584 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Klok Casio
15 Augustus 2022
16 Augustus 2022
17 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
15 Augustus 2022
2 September 2022
Handleiding Klok
- Klok Braun
- Klok IKEA
- Klok Fysic
- Klok Xiron
- Klok Accusplit
- Klok Ade
- Klok Alecto
- Klok Amplicom
- Klok Ascot
- Klok Audiovox
- Klok Auriol
- Klok Balance
- Klok Balance Time
- Klok BBrain
- Klok Dexford
- Klok Digi-tech
- Klok Ecom
- Klok Elro
- Klok Eurochron
- Klok Fisher Price
- Klok Geemarc
- Klok Gingko
- Klok Gira
- Klok Global Tronics
- Klok GlobalTronics
- Klok Glunz
- Klok Hager
- Klok Hama
- Klok Hermle
- Klok IHome
- Klok Irox
- Klok Karlsson
- Klok Kogan
- Klok Konig
- Klok Krontaler
- Klok La Crosse
- Klok Lenovo
- Klok Lexon
- Klok Livoo
- Klok Lorus
- Klok Lydion
- Klok Marquant
- Klok Mebus
- Klok Mondaine
- Klok Muse
- Klok Nedis
- Klok Perel
- Klok Profile
- Klok Ranex
- Klok RCA
- Klok Salter
- Klok Sempre
- Klok Taylor
- Klok Techno Line
- Klok Technoline
- Klok TFA
- Klok Tronic
- Klok United Office
- Klok Velleman
- Klok Ventus
- Klok Vitek
- Klok Weinberger
- Klok Jacob Jensen
- Klok Jung
- Klok Oregon Scientific
- Klok McIntosh
- Klok Camry
- Klok ECG
- Klok EMOS
- Klok Cresta
- Klok Citizen
- Klok Trevi
- Klok Zuiver
- Klok Chacon
- Klok Valcom
- Klok Dormakaba
- Klok AcuRite
- Klok ART
- Klok La Crosse Technology
- Klok AV:link
- Klok Elation
- Klok ASA
- Klok TFA Dostmann
- Klok Antelope Audio
- Klok Equity
- Klok DB Technologies
- Klok Focus Electrics
- Klok Pyramid
- Klok CyberData Systems
- Klok Electronics International
- Klok Antelope
- Klok Bearware
Nieuwste handleidingen voor Klok
30 December 2025
14 December 2024
14 December 2024
14 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024