Carson 3D Series TD-042 Handleiding
Carson
Verrekijker
3D Series TD-042
Lees hieronder de đ handleiding in het Nederlandse voor Carson 3D Series TD-042 (2 pagina's) in de categorie Verrekijker. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
3DSeries
Binoculars
TD-832
TD-842
TD-042
TD-050
Congratulations on selecting your new 3D Series Binocular! In order to achieve optimum
performance, please follow instructions for proper use and care.
PRODUCT SPECIFICATION:
Model
MagniĂżcation
TD-832
8x
TD-842
8x
TD-042
10x
TD-050
10x
Objective Lens Diameter 32mm 42mm 42mm 50mm
Prism BAK-4 BAK-4 BAK-4 BAK-4
Lens Coating
Fully
Multi-Coated
Fully
Multi-Coated
Fully
Multi-Coated
Fully
Multi-Coated
Field of View 392 feet 341 feet 314 feet 262 feet
Eye Relief 19.5mm 19.5mm 16mm 20mm
Close Focus 6.6 feet 9.8 feet 9.8 feet 13.1 feet
O-Ring Sealed Yes Yes Yes Yes
Phase Coated Yes Yes Yes Yes
Waterproof / Fogproof Yes Yes Yes Yes
ED Glass Objective Lens No No No No
Weight 1.2 lbs. 1.4 lbs. 1.5 lbs. 1.7 lbs.
Dimensions 4.9" x 4.8" x 1.8" 5.5" x 5" x 2" 5.5" x 5" x 2" 6.8" x 5.3" x 2.5"
PRISM SYSTEM:
Your Carson 3D binoculars
feature a roof prism system.
The prisms overlap closely
allowing the objective
(front) lenses to line up
directly with the eyepieces.
The result is a slim,
streamlined shape in which
the lenses and prisms that
magnify and correct the
image are in a straight line.
objective lens
eyepiece
EYE ADJUSTMENTS: HOW TO ADJUST FOR DISTANCE BETWEEN YOUR EYES
The distance between the eyes, called âinterpupillary distance,â varies from person to person. To achieve perfect alignment
of lens to eye, follow these simple steps:
1. Hold your binoculars in the normal viewing
position.
2. Grasp each barrel îrmly. Move barrels
closer together or further apart until you see
a singular circular îeld. Always reset your
binoculars to this position before using.
FOCUSING YOUR BINOCULARS:
Carson 3D binoculars have a center focus wheel and
an independent right diopter eyepiece to account for
small diîerences in the strength of each eye. Please
follow the steps below to focus properly:
1. Adjust the interpupillar distance.
2. Rotate the right eyepiece to its index mark
and sight on a îxed distant object.
3. Cover the right objective (front) lens with
your hand, then rotate the central focusing
wheel until the image in the left eyepiece is
sharp.
4. Cover the left objective (front) lens with your
hand then rotate the right eyepeice until the
image is sharp. (Note this setting for future
use.)
5. Image should now be focused to your
individual eyestrength.
TWIST-UP EYECUPS:
Your Carson 3D binocular features twist-up eyecups
designed to exclude extraneous light. If you do not
wear eyeglasses, you may choose to twist the
eyecups out to block stray light and reîections from
your view. If you are an eyeglass wearer, lowering the
eyecups will bring your eyes closer to the binocular
lenses, providing an improved îeld of view.
twist-adjust
adjustable
right diopter
(eyepiece)
eyecups
central
focusing wheel
WATERPROOFING:
All Carson 3D binoculars are nitrogen purged and o-ring
sealed to protect your binocular from water damage. They
are designed to protect against accidental splashing, rain
or even full submersion in up to 1 meter of water for up to
5 minutes.
OPTICAL COATINGS:
All 3D binoculars featuer fully multi-coated optics, meaning
that all glass surfaces have multiple coatings applied to them
to prevent internal reîection and light loss. This results in
images that are brighter, shaper and higher in contrast.
As light travels through a roof prism binocular, it becomes
slightly out of phase. This aîects the color balance and
îdelity. Your 3D binoculars are phase coated to correct this
problem, forcing the light back into phase and therefore
resulting in more accurate color reproduction.
All 3D binoculars come with both a neck strap and a shoulder harness. You can choose either accessory to hold your binocular
depending on your personal preference.
ATTACHING THE NECK STRAP:
1. Thread the end of the strap up through the strap clip on
the side of your binocular.
2. Thread the strap through the îrst loop of the plastic
strap piece.
3. Continue to thread the strap through the second loop of
the plastic strap piece.
4. Adjust the strap to the desired length and pull tight.
5. Slide the plastic cuî over the loose end of the neck
strap.
ATTACHING THE SHOULDER HARNESS:
1. Remove the security buttons from the quick release hooks
on your binocular harness.
2. Slide the security button loop upward through the strap
clips on each side of your binocular.
3. Feed the security button through the loop and tighten.
4. Attach quick release hook onto loop.
5. Slide security button into center of quick release hook.
1 2 3
4 5
USE OF A TRIPOD ADAPTER:
All Carson 3D binoculars are compatible with most
standard binocular tripod adapters. To attach a tripod
adapter to your binoculars:
1. Twist the tripod adapter cap (located at the hinge in
between the binocular barrels) counterclockwise and
remove it.
2. Attach the binocular tripod adapter into the threaded
hole in the binocular turning it clockwise until tight.
3. Attach the bottom of the tripod adapter to your tripod.
NOTE: Tripod and adapter are not included with your
3D binoculars.
ripod and adapt e not included with y
1 2 3
INSTRUCTIONS FOR CARE:
Cleaning must be done safely to avoid scratching the
lenses. This can be accomplished with the following
procedure:
1. Blow away any dust or debris on the lens (or use a soft
brush.)
2. To remove dirt, grease or îngerprints, clean with a soft
cotton cloth, rubbing in a circular motion. Use of a
coarse cloth or unnecessary rubbing may scratch the
lens surface and eventually cause permanent damage.
3. For a more thorough cleaning, use a Carson C6Âź lens
cleaning product.
4. IMPORTANT: Never attempt to clean your binoculars
internally or try to take them apart.
5. Keep binoculars in case when not in use.
Customer Service:
If you experience any diîculties, please contact us and we will be happy to help you.
In the U.S.A.
Phone: 1-631-963-5000
Email: info@carson.com
In the U.K.
Phone: +44 (0) 1938 557440
Email: uksupport@carson.com
In the E.U.
Phone: +44 (0) 1938 557440
Email: eusupport@carson.com
For warranty information, visit www.carson.com/warranty
Product specificaties
| Merk: | Carson |
| Categorie: | Verrekijker |
| Model: | 3D Series TD-042 |
Heb je hulp nodig?
Als je hulp nodig hebt met Carson 3D Series TD-042 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verrekijker Carson
28 Mei 2024
26 Juli 2023
25 Mei 2023
10 Mei 2023
26 April 2023
20 April 2023
18 April 2023
8 April 2023
7 April 2023
22 Maart 2023
Handleiding Verrekijker
- Verrekijker Braun
- Verrekijker Nikon
- Verrekijker Canon
- Verrekijker Olympus
- Verrekijker Apeman
- Verrekijker Asaklitt
- Verrekijker ATN
- Verrekijker Auriol
- Verrekijker Bresser
- Verrekijker Bushnell
- Verrekijker Bynolyt
- Verrekijker Dorr
- Verrekijker Focus
- Verrekijker Hama
- Verrekijker Kodak
- Verrekijker Leica
- Verrekijker Maginon
- Verrekijker Meade
- Verrekijker Minox
- Verrekijker National Geographic
- Verrekijker Nedis
- Verrekijker NEWTON
- Verrekijker Pentax
- Verrekijker Praktica
- Verrekijker Pulsar
- Verrekijker Rocktrail
- Verrekijker Rollei
- Verrekijker Sharper Image
- Verrekijker Technaxx
- Verrekijker Tevion
- Verrekijker Traveler
- Verrekijker Trust
- Verrekijker Vanguard
- Verrekijker Vivitar
- Verrekijker Vortex
- Verrekijker Yukon
- Verrekijker Crivit
- Verrekijker Barska
- Verrekijker Kayoba
- Verrekijker Celestron
- Verrekijker Levenhuk
- Verrekijker Cresta
- Verrekijker Armasight
- Verrekijker Leupold
- Verrekijker Steiner
- Verrekijker Swarovski
- Verrekijker Zeiss
- Verrekijker Swarovski Optik
- Verrekijker AGM
- Verrekijker Blaser
- Verrekijker SIG Sauer
- Verrekijker Umarex
- Verrekijker Eagle Optics
- Verrekijker Berger & Schröter
- Verrekijker Snypex
- Verrekijker InfiRay
- Verrekijker Goview
- Verrekijker Eschenbach
- Verrekijker Explore Scientific
- Verrekijker Liemke
- Verrekijker Night Owl
- Verrekijker SVBONY
- Verrekijker IGEN
- Verrekijker Rexing
- Verrekijker Opticron
- Verrekijker Alpen Optics
- Verrekijker Kite Optics
- Verrekijker Meopta
- Verrekijker Hawke
- Verrekijker PARD
- Verrekijker RIX
Nieuwste handleidingen voor Verrekijker
20 December 2024
18 December 2024
18 December 2024
16 December 2024
16 December 2024
10 December 2024
8 December 2024
8 December 2024
7 December 2024
25 November 2024