Canon XL H1 Handleiding

Canon Videorecorder XL H1

Lees hieronder de 📖 handleiding in het Nederlandse voor Canon XL H1 (161 pagina's) in de categorie Videorecorder. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/161

Mini Digital

Video

Cassette

HD VIDEO CAMERA RECORDER

Instruction Manual

CAMÉSCOPE ET LECTEUR VIDÉO HD

Manuel d’instruction

VIDEOCÁMARA Y GRABADORA HD

Manual de Instrucciones

NTSC

NTSCNTSC

PUB. DIM-720

English

Fran

ais

Español

Intro ducti on

Important Usage Instructions

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE,

USE THE RECOMMENDED ACCESSORIES ONLY.

Unauthorized recording of copyrighted materials may infringe on the rights of copyright

owners and be contrary to copyright laws.

Digital Video Camcorder, XL H1A Systems.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and use in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual.

If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

mpor

t W

arn

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous

voltage” within the product’s enclosure, that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point, within an equilateral

triangle, is intended to alert the user to the

presence of important operating and maintenance

(servicing) instructions in the literature

accompanying the product.

Introduction

IMPORTANT SAFETY INSTRUCTIONS

In these safety instructions the word “product” refers to

the Canon Digital Video Camcorder XL H1A and all its

accessories.

1. Read Instructions — All the safety and operating

instructions should be read before the product is

operated.

2. Retain Instructions — The safety and operating

instructions should be retained for future reference.

3. Heed Warnings — All warnings on the product and in

the operating instructions should be adhered to.

4. Follow Instructions — All operating and maintenance

instructions should be followed.

5. Cleaning — Unplug this product from the wall outlet

before cleaning. Do not use liquid or aerosol cleaners.

The product should be cleaned only as recommended

in this manual.

6. Accessories — Do not use accessories not

recommended in this manual as they may be

hazardous.

7. Avoid magnetic or electric fields — Do not use the

camera close to TV transmitters, portable

communication devices or other sources of electric or

magnetic radiation. They may cause picture

interference, or permanently damage the camera.

8. Water and Moisture — Hazard of electric shock — Do

not use this product near water or in rainy/moist

situations.

9. Placing or Moving — Do not place on an unstable cart,

stand, tripod, bracket or table. The product may fall,

causing serious injury to a child or adult, and serious

damage to the product.

A product and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the product and cart

combination to overturn.

10. Power Sources — The CA-920

Compact Power Adapter should be operated only from

the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your product dealer or local power

company. Regarding other power sources such as

battery power, refer to instructions in this manual.

11. Polarization — The CA-920 Compact Power Adapter

is equipped with a polarized 2-prong plug (a plug

having one blade wider than the other).

The 2-prong polarized plug will fit into the power outlet

only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try

reversing the plug. If the plug still fails to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

12. Power Cord Protection — Power cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them. Pay

particular attention to plugs and the point from which

the cords exit the product.

13. Outdoor Antenna Grounding — If an outside antenna

is connected to the product, be sure the antenna is

grounded so as to provide some protection against

voltage surges and built-up static charges. Section

810 of the National Electrical Code, ANSI / NFPA No.

70—1984, provides information with respect to proper

grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna

discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode. See

figure 1.

14. Lightning — For added protection of this product

during a lightning storm, or when it is left unattended

and unused for long periods of time, disconnect it from

the wall outlet and disconnect the antenna. This will

prevent damage to the product due to lightning and

power-line surges.

15. Power Lines — An outside antenna system should not

be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall

into such power lines or circuits. When installing an

outside antenna system, extreme care should be

taken to keep from touching such power lines or

circuits as contact with them might be fatal.

16. Overloading — Do not overload wall outlets and

extension cords as this can result in a risk of fire or

electric shock.

17. Objects and Liquid Entry — Never push objects of any

kind into this product through openings as they may

touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Be careful not to

spill liquid of any kind onto the product.

18. Servicing — Do not attempt to service this product

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

Fig.1

ANTENNA LEAD IN

WIRE

ELECTRIC SERVICE

EQUIPMENT

GROUND

CLAMP

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

NEC - NATIONAL

ELECTRICAL CODE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

Product specificaties

Merk:	Canon
Categorie:	Videorecorder
Model:	XL H1
Kleur van het product:	Zwart
Gewicht:	3750 g
Breedte:	226 mm
Diepte:	496 mm
Hoogte:	220 mm
Beeldscherm:	LCD
Beeldschermdiagonaal:	2.4 "
Totaal aantal megapixels:	1.67 MP
Compatibele geheugenkaarten:	MMC, SD
Maximale beeldsnelheid:	25 fps
Microfoon, line-in ingang:	Ja
Focus:	Automatisch/handmatig
Beeldstabilisator:	Ja
Optische zoom:	20 x
35 mm cameralens equivalent:	38.9 - 778 mm
Levensduur accu/batterij:	5 uur
Aansluitingen:	- IEEE1394\n- EVF \n- SD in/out\n- S-Video\n- Headphone
Aantal IEEE 1394-/Firewire-poorten:	2
Lenssysteem:	XL interchangeable
Maat filter:	72 mm
S-Video-uitgang:	Ja
Soort camcorder media:	Mini-DV
Werkelijk aantal megapixels (Film):	- MP
Stroomverbruik (typisch):	7.8 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Batterijtechnologie:	Lithium-Ion (Li-Ion)
S-Video-ingang:	Ja
DV port:	Ja