Canon VIXIA HF R500 Handleiding

Canon Camcorders VIXIA HF R500

Lees hieronder de 📖 handleiding in het Nederlandse voor Canon VIXIA HF R500 (3 pagina's) in de categorie Camcorders. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

5 6

HD Camcorder

Charging the Battery Pack

Charge the supplied battery pack in advance. Fully charging the

supplied battery pack will take about 5 hours 35 minutes.

1. Plug the compact power adapter

into a power outlet and connect it

to the camcorder’s DC IN terminal.

• For Asia only: Connect the power

cord to the compact power adapter

before plugging the power cord into

the power outlet.

2. Attach the battery pack to the

camcorder.

• Press the battery pack softly into

the battery attachment unit and

slide it up until it clicks in place.

3. Charging will start when the

camcorder is turned off.

• The POWER/CHG dicator will turn on

in red (battery ack charging). When the

red POWER/CHG indicator goes out,

the b ttery pack is fully charged.

4. When the battery pack is fully charged,

disconnect the compact power

adapter from the camcorder and then

from the power outlet.

DC IN terminal

POWER/CHG (charge) indicator

PUB. DIE-0449-000



HD Camcorder

VIXIA HF R50 / VIXIA HF R52 / VIXIA HF R500



BP-718 Battery Pack []



CA-110 Compact Power Adapter []

(CA-110E, including power cord, in Asia)



IFC-300PCU/S USB Cable []



HTC-100/S High Speed HDMI Cable []



Transfer Utility LE Startup Guide

Package Contents

Basic Setup

The first time you turn on the camcorder, you will be guided by the camcorder’s basic

setup screens to select the camcorder’s initial settings, such as the language, date and

time, movie format, etc.

1. Turn on the camcorder.

• Open the LCD panel or press [.

2. Touch the desired language for onscreen displays and then touch [ ].æ

3. Touch the desired date/time format and then touch [ ].æ

4. Set the date and time.

• Touch a field you want to change and touch [ ] or [Í Î] to

change. Repeat as necessary.

• Touch [24H] to use 24-hour clock or leave untouched to use

AM/PM.

5 Touch [OK] and then touch [ ].æ

6 Touch [· ¸] or [ ] to select the movie format and then

touch [ ].æ

• B After you select the movie format, you need to

select the memory to be used for recording movies (step 7)

and photos (step 8).

• @ No further settings are necessary. Skip to step 9.

7 Touch [& 8] (built-in memory) or [ ] (memory card) and then touch [ ].æ

8 Touch [& 8] (built-in memory) or [ ] (memory card) and then touch [ ].æ

9. Touch [OK] to complete the basic setup and close the setup screen.

Inserting a Memory Card

You can use commercially available SD, SDHC and

SDXC cards with this camcorder. We recommend using

memory cards rated SD Speed Class 4, 6 or 10. Initialize

a memory card before using it with the camcorder for the

first time ( ).; Initializing the Memory

1. Open the LCD panel.

• The camcorder will turn on and the first screen of the

initial setup will appear.

2. Press [ to turn off the camcorder.

• Make sure the POWER/CHG indicator is off.

3. Open the memory card slot cover and insert the

memory card.

• Insert the memory card at a slight angle, with the label

facing toward the lens.

4. Close the memory card slot cover.

1. Turn on the camcorder and open the lens over.

• Open the LCD panel or press and then slide [

down the lens cover switch.

2. Video: Press to start recording video. Y

Press again to stop recording.

Touch [PHOTO] to record a Photos:

photo.

3. When you finish recording, close the lens cover and

turn off the camcorder.

Shooting Video and Taking Photos Playing Back Video and Viewing Photos

1. Press the ^ button.

• The [y] index screen will open. To play back different content, change the index screen.

[ ] [0> } Photo Playback] for the [}] (photos) index screen.

[ ] [0>9 Baby Album] for the [9] index screen (only scenes recorded in Baby mode).

[ ] [0> Video Snapshot] for the [¦] index screen (only AVCHD video snapshot scenes).

To change the memory or video format*

From the index screen:

1. Touch the index screen button (next to

the (Home) button).0

2. Select the memory* ( or ) and/& 8

or movie format ( or ) of the · ¸

recordings you wish to play back and

then touch [OK].

* only.B

To delete recordings

From the index screen:

1. Touch [Edit] > [Delete].

2. Select whether to delete all the scenes/

photos in the same folder, selected

scenes/photos, or all scenes/photos.

• To select individual recordings: touch all

the scenes/photos you wish to delete to

mark them with a , then touch [OK]."

3. Touch [Yes] > [OK].

2. Touch the thumbnail of the scene or photo you want to play back.

• During playback, touch the screen to display the playback controls.

Installing the Camcorder’s

Instruction Manual (PDF File)

This guide only introduces the most basic

functions of the camcorder to get you started.

To learn more about your camcorder, to read

important handling precautions and to consult

the troubleshooting section if an error message

is displayed, be sure to read the full-version

Instruction Manual (PDF file*). Access the

following Web site. Click on your country/region

and follow the onscreen instructions to download

the PDF file.

* Adobe® Reader® 6 or later is required to view the PDF

file.

http://www.canon.com/icpd/

Getting Started

 

 

Flashes while recording

Index screen button

Top view

Memory Card

Lens

POWER/CHG

indicator is off

B Wi-Fi Functions

The camcorder features a number of convenient

Wi-Fi functions that will allow you to use it in

combination with Wi-Fi enabled smartphones

and tablets. For example, you can use a

smartphone or tablet to control the camcorder

remotely while recording, or to upload recordings to the Web.

1. If necessary, install the required app on the smartphone or

tablet.

2. Select the desired Wi-Fi function on the camcorder.

3. Wirelessly connect the device to the camcorder.

Note: The necessary procedure may differ according to the Wi-Fi

function you wish to use. For details, be sure to refer to the PDF

Instruction Manual ( ).; Wi-Fi Functions

Optional Accessories

Canon offers a wide range of optional accessories for your camcorder. For

details, be sure to refer to the PDF Instruction Manual (; Optional

Accessories).

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used with

genuine Canon accessories. Canon shall not be liable for any damage to

this product and/or accidents such as fire, etc., caused by the malfunction

of non-genuine Canon accessories (e.g., a leakage and/or explosion of

a battery pack). Please note that this warranty does not apply to repairs

arising out of the malfunction of non-genuine Canon accessories, although

you may request such repairs on a chargeable basis.

This mark identifies genuine Canon video accessories.

When you use Canon video equipment, we recommend

Canon-brand accessories or products bearing the same

mark.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECT RIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure,

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the product.

Important Safety InstructIons

In these safety instructions the word “apparatus” refers to the Canon HD Camcorder

VIXIA HF R52 / VIXIA HF R50 / VIXIA HF R500 and all its accessories.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

8 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

9 Only use attachments/accessories specified by the manufacturer.

10 Unplug this apparatus during lightning storms or when unused for long periods of

time.

11 Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

CA-110 identification plate is located on the bottom.

Important Usage Instructions

Unauthorized recording of copyrighted materials may infringe on the

rights of copyright owners and be contrary to copyright laws.

FCC/IC NOTICE

HD Camcorder, ID0019 / ID0022 systems

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits

for class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and use in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference w

not occur in a particular installation. If this equipment does caus harmful

interference to radio or television reception, which can be d termined by

turning the equipment off and on, the user is encourag d to try to correct

the interference by one or more of the following m asures:

• Reorient or relocate the receiving antenna

• Increase the separation between the quipment and receiver.

• Connect the equipment into an utlet on a circuit different from that to

which the receiver is conne ted.

• Consult the dealer or a experienced radio/TV technician for help.

Use of shielded cab is required to comply with class B limits in Subpart

B of Part 15 of FCC Rules.Do not make any changes or modifications to

the equipment unless o herwise specified in the manual. If such changes

or modifications should b made, you could be required to stop operation

of the equipment.

Model ID0019 (including WLAN Module Model WM217, FCC

ID: AZD217)

This device complies with Industry C nada license-exempt RSS st ndard(s).

Operation is subject to the following two conditions: (1) this de ice may

not cause interference, and (2) this devic must accept a y interference,

including interference that may cause und sired ope ation of the device.

This transmitter must not be co-located or operated in conjunction with

any other antenna or transmitter.

The available scientific evidence does not show that any health problems

are associated with using low-power wireless devices. There is no proof,

however, that these low power wireless devices are absolutely safe. Low-

power wireless devices emit low levels of radio frequency energy (RF) in the

microwave range while being used. Whereas high levels of RF can produce

health effects (by heating tissue), exposure to low-level RF that does not

produce heating effects causes no known adverse health effects. Many

studies of low-level RF exposures have not found any biological effects.

Some studies have suggested that some biological effects might occur, but

such findings have not been confirmed by additional research. This model

has been tested and found to comply with FCC/IC radiation exposure limits

set forth for an uncontrolled equipment and meets the FCC radio frequency

(RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the

IC radio frequency (RF) Exposure rules.

Canon U.S.A., Inc.

One Canon Park, Melville, NY 11747, USA

Tel No. 1-800-OK-CANON (1-800-652-2666)

USA and Canada only:

The Lithium ion/polymer battery that powers the product is

recyclable. Please call 1-800-8-BATTERY for information on

how to recycle this battery.

Precautions About the Battery Pack

DANGER!

Treat the battery pack with care.

• Keep it away from fire (or it might explode).

• Do not expose the battery pack to temperature higher than 60 ºC (140 ºF).

Do not leave it near a heater or inside a car in hot weather.

• Do not try to disassemble or modify it.

• Do not drop it or subject it to shocks.

• Do not get it wet.

REGIONS OF USE

The VIXIA HF R52 and VIXIA HF R50 are in compliance (as of November 2013)

with the radio signal regulations of the regions listed below. For details on other

regions where it can be used, make inquiries with the contacts listed inside the

blue frame at the bottom of this page.

REGIONS

Canada, Hong Kong S.A.R., South Korea, Taiwan, USA

Model

ID 019: VIXIA HF R50 / VIXIA HF R52

Important Note About the Memory Card

• Observe the following precautions while the ACCESS indicator is on or

flashing. Failing to do so may result in permanent da a loss or damage to

the memory card.

– Do not open the memory card slot cover.

– Do not disconnect the camcorder’s power sour e or turn off the camcorder.

– Do not change the camcorder’s operatin mode.

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other

countries.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks

of the Wi-Fi Alliance.

• Other names and products not mentioned above may be trademarks or

registered trademarks of their respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• “Full HD 1080” refers to Canon camcorders compliant

with high-definition video composed of 1,080 vertical

pixels (scanning lines).

• This product is licensed under AT&T patents for the

MPEG-4 standard and may be used for encoding MPEG-4 compliant

video and/or decoding MPEG-4 compliant video that was encoded only

(1) for a personal and non-commercial purpose or (2) by a video provider

licensed under the AT&T patents to provide MPEG-4 compliant video. No

license is granted or implied for any other use for MPEG-4 standard.

The information in this guide is verified as of November 2013. Specifications and outer appearance are subject to change without previous notice.

USA

CANON U.S.A., INC. NEW JERSEY OFFICE

100 Jamesburg Road, Jamesburg, NJ 08831 USA

CANON U.S.A., INC. CHICAGO OFFICE

100 Park Blvd., Itasca, IL 60143 USA

CANON U.S.A., INC. LOS ANGELES OFFICE

15955 Alton Parkway, Irvine, CA 92618 USA

CANON U.S.A., INC. HONOLULU OFFICE

210 Ward Avenue, Suite 200, Honolulu, Hl 96814 USA

 If you have any questions, call the Canon U.S.A. Information Center toll-

free at 1-800-828-4040 (USA only).

CANADA

CANON CANADA INC.

6390 Dixie Road, Mississauga, ON L5T 1P7

 If you have any questions, call the Canon Canada Information Center toll

free (in Canada only) at 1-800-OK-CANON (1-800-652-2666).

 Si vous avez des questions, veuillez téléphoner 1-800-OK-CANON

(1-800-652-2666, sans frais au Canada seulement).

MÉXICO

CANON MEXICANA, S DE RL DE CV

Blvd. Manuel Ávila Camacho No. 138, Piso 17 Col. Lomas de Chapultepec,

C.P. 11000 México, D.F., México

CANON U.S.A., INC. NEW JERSEY OFFICE

100 Jamesburg Road, Jamesburg, NJ 08831 USA

CENTRO Y SURAMÉRICA

CANON LATIN AMERICA, INC.

One Canon Park, Melville, NY 11747 USA

ASIA

CANON HONGKONG COMPANY LTD.

19/F, The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong

Tel: +852 3191 2333, Fax: +852 2428 3963

Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

Product specificaties

Merk:	Canon
Categorie:	Camcorders
Model:	VIXIA HF R500
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	235 g
Breedte:	53 mm
Diepte:	116 mm
Hoogte:	57 mm
LED-indicatoren:	Ja
Capaciteit van de accu/batterij:	- mAh
Beeldscherm:	LCD
Beeldschermdiagonaal:	3 "
Touchscreen:	Ja
Interne opslagcapaciteit:	- GB
Ondersteund audioformaat:	AAC, AC3
Ondersteunde videoformaten:	AVCHD, MPEG4
Type aansluitplug:	3,5 mm
Totaal aantal megapixels:	3.28 MP
Minimale belichting:	0.4 Lux
Compatibele geheugenkaarten:	SD, SDHC, SDXC
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Aantal USB 2.0-poorten:	1
Microfoon, line-in ingang:	Ja
Brandpuntbereik:	2.8 - 89.6 mm
Hoofdtelefoonuitgangen:	1
Formaat analoog signaal:	NTSC
Omvang optische sensor:	1/4.85 "
Beeldstabilisator:	Ja
Maximale beeldresolutie:	- Pixels
Type beeldsensor:	CMOS
Digitale zoom:	1140 x
Optische zoom:	32 x
35 mm cameralens equivalent:	32.5 - 1853 mm
Ingebouwde flitser:	Nee
Maximale videoresolutie:	1920 x 1080 Pixels
HD type:	Full HD
Ingebouwde microfoon:	Ja
Beeldschermresolutie (numeriek):	230000 Pixels
Witbalans:	Auto, Daylight, Manual, Tungsten
3D:	Nee
Videoresoluties:	1280 x 720,1440 x 1080,1920 x 1080 Pixels
Levensduur accu/batterij:	- uur
HDMI:	Nee
Scene modes:	Beach, Children, Fireworks, Night, Portrait, Snow, Sports, Spotlight, Sunset
Foto-effecten:	Black&White, Sepia, Vivid
Composiet video-uitgang:	1
Normal focusing bereik:	0.0001 - 1 m
Scherpstellen:	Auto
Blootstelling type:	Auto, Manual
Optische drive type:	Nee
S-Video-uitgang:	Nee
Camcorder media type:	Geheugenkaart
Soort camcorder media:	Nee
Uitwisselbare lens:	Nee
Werkelijk aantal megapixels (Film):	2.07 MP
Werkelijk aantal megapixels (afbeelding):	2.07 MP
Afbeeldings stabilisator type:	Hybrid Image Stabilization (HIS)
Camcorder type:	Handcamcorder
Sluiter snelheid (video):	0.0005 s
Beeldzoeker:	Niet beschikbaar
Bedrijfstemperatuur (T-T):	-5 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 85 procent
Vari-angle LCD display:	Ja
Sluiter snelheid (foto):	0.002 s