Canon PowerShot ELPH 500 HS Handleiding

Canon Camcorder PowerShot ELPH 500 HS

Lees hieronder de đź“– handleiding in het Nederlandse voor Canon PowerShot ELPH 500 HS (212 pagina's) in de categorie Camcorder. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/212
Camera User Guide
ENGLISH
• Make sure you read this guide, including the “Safety
Precautions” section, before using the camera.
• Reading this guide will help you learn to use the camera
properly.
• Store this guide safely so that you can use it in the future.
COPY
2
Check if the following items are included in your camera package.
If anything is missing, contact the retailer where you purchased the camera.
Using the PDF Manuals
The following PDF manuals are included in the Readme folder of the CD-ROM:
When the software is installed on your computer, the PDF manuals will be copied to
the computer and you can refer to them by clicking the shortcuts on the desktop.
•Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many
features to shoot more challenging photos.
•Software Guide
Read when you want to use the included software.
•A memory card is not included.
•Adobe Reader is required to view the PDF manuals.
Checking the Package Contents
Battery Charger
CB-2LY/CB-2LYE
Camera Battery Pack NB-6L
(with Terminal Cover)
Interface Cable
IFC-400PCU
Wrist Strap
WS-DC10
Stereo AV Cable
AVC-DC400ST
Warranty
Card
Getting Started
DIGITAL CAMERA
Solution Disk
COPY
3
Test Shots and Disclaimer
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it to the country of sale
before proceeding with a warranty claim to a Canon Customer Support Help
Desk. For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor (Screen)
•The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
•The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the
camera.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
Read This First
COPY
4
What Do You Want to Do?
4
zShoot, leaving it to the camera to make settings .........................25
O t
Take good people shots
Shoot various other scenes
Shoot with special effects
I w P
V
Portraits
(p. 64)
Facial expressions
(p. 81)
Kids and pets
(p. 65)
At the beach
(p. 65)
Against snow
(p. 66)
Night Scene
(p. 65)
Low Light
(p. 65)
Foliage
(p. 65)
Fireworks
(p. 66)
Fish-eye Effect
(p. 69)
Toy Camera Effect
(p. 75)
Miniature Effect
(p. 70)
Monochrome
(p. 74)
Super vivid colors
(p. 68)
Poster Effect
(p. 68)
Creative Light Effect
(p. 71)
Shoot
z
Focus on faces
..................................................................25, 64, 95
zShoot in places where I cannot use the flash
(turn off the flash) .........................................................................54
zTake pictures with me in them too (self-timer) .................58, 59, 78
zInsert the date and time into my shots .........................................57
zTake a picture while shooting a movie .........................................67
COPY
What Do You Want to Do?
5
1
zLook at my pictures ...................................................................... 28
zAutomatically play back pictures (slideshow) .............................124
zLook at my pictures on a TV ......................................................133
zLook at my pictures on a computer. .............................................34
zQuickly search pictures .............................................................. 120
zErase pictures ...................................................................... 30, 139
View
E
zShoot movies .......................................................................31, 111
zView movies .................................................................................33
zShoot fast moving subjects and play them back
in slow motion ............................................................................114
Shoot/View Movies
2
zEasily print pictures .................................................................... 152
Print
zSave images to a computer .........................................................34
Save
3
zTurn off sounds ............................................................................49
zUse the camera abroad........................................................16, 169
zUnderstand what is displayed on the screen .............................187
Other
COPY
Table of Contents
7
Shooting in Program AE ................. 84
Adjusting the Brightness
(Exposure Compensation) ............ 85
Turning the Flash On ...................... 85
Adjusting the White Balance ........... 86
Changing the ISO Speed................ 88
Correcting the Brightness and
Shooting (i-Contrast)..................... 89
Changing the Aspect Ratio ............. 90
Continuous Shooting....................... 91
Changing the Tone of an Image
(My Colors) ................................... 92
Shooting Close-ups (Macro) ........... 94
Shooting Far Away Subjects
(Infinity) ......................................... 94
Changing the AF Frame Mode........ 95
Magnifying the Focal Point.............. 97
Choosing the Subject to
Focus On (Touch AF) ................... 98
Shooting with the AF Lock .............. 99
Shooting with Servo AF ................ 100
Changing the Metering Method..... 101
Shooting with the AE Lock............ 102
Shooting with the FE Lock ............ 102
Shooting with Slow Synchro ......... 103
Red-Eye Correction ...................... 104
Checking for Shut Eyes ................ 105
Setting the Shutter Speed............. 108
Setting the Aperture Value............ 109
Shooting Various Kinds of
Movies......................................... 112
Shoot Movies That Look Like a
Miniature Model (Miniature
Effect).......................................... 113
Shooting Super Slow Motion
Movies......................................... 114
Changing the Image Quality..........116
Other Shooting Functions.............. 117
Editing ........................................... 117
Quickly Searching Images............. 120
Viewing Images in Filtered
Playback...................................... 123
Viewing Slideshows....................... 124
Checking the Focus....................... 126
Magnifying Images ........................ 127
Viewing Each Image in a Group.... 128
Displaying Various Images
(Smart Shuffle)............................ 130
Changing Image Transitions .........131
Easy Operations with Touch
Actions ........................................ 131
Viewing Images on a TV ...............133
Protecting Images ......................... 137
Erasing All Images ........................139
Tagging Images as Favorites........141
Organizing Images by Category
(My Category) .............................143
Rotating Images ............................144
Resizing Images............................ 145
Trimming ....................................... 146
5 Choosing Settings
Yourself...............................83
6 Getting More Out of Your
Camera..............................107
7 Using Various Functions for
Shooting Movies.............. 111
8 Using Various Playback and
Editing Functions............ 119
COPY
Table of Contents
8
Adding Effects with the My Colors
Function.......................................148
Correcting the Brightness
(i-Contrast)...................................149
Correcting the Red-Eye Effect.......150
Printing Images..............................152
Choosing Images for Printing
(DPOF) ........................................159
Changing Camera Settings............164
Changing Shooting Function
Settings........................................171
Changing Playback Function
Settings........................................176
Using Household Power................ 178
Using an Eye-Fi Card.................... 179
Troubleshooting ............................ 181
List of Messages That Appear
on the Screen.............................. 184
Information Displayed
on the Screen.............................. 187
Handling Precautions .................... 191
Functions Available in Each
Shooting Mode............................ 192
Menus ........................................... 196
Playback Mode FUNC. Menu........ 200
Specifications ................................ 201
Index ............................................. 205
9 Printing ............................. 151
10Customizing Camera
Settings ............................ 163
11Useful Information ...........177
COPY
9
•Icons are used in the text to represent the camera buttons and switches.
•Language that displays on the screen appears inside [ ] (square brackets).
•: Things you should be careful about
•: Troubleshooting tips
•: Hints for getting more out of your camera
•: Supplemental information
•(p. xx): Reference pages (“xx” stands for a page number)
•This guide assumes all functions are at their default settings.
•The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
Conventions Used in This Guide
COPY
10
•Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
•The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
•Be sure to also check the guides included with any separately sold accessories you
use.
Warning Denotes the possibility of serious injury or death.
•Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
•Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
•Use only recommended power sources.
•Do not attempt to disassemble, alter or apply heat to the product.
•Avoid dropping or subjecting the product to severe impacts.
•To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
•Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
•Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
•Do not let the product come into contact with water (e.g. sea water) or other
liquids.
•Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
•Use only the recommended battery.
•Do not place the battery near or in direct flame.
•Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
•Do not handle the power cord with wet hands.
•Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
•Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery acid
contacts eyes, mouth, skin or clothing, immediately flush with water.
Safety Precautions
COPY
Safety Precautions
11
•Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
•Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio
CD player (music player) could damage the speakers.
Caution Denotes the possibility of injury.
•Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
•Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
•When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
•Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
•The slideshow transition effects may cause discomfort when viewed for
prolonged periods.
Caution Denotes the possibility of damage to the equipment.
•Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
•When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
•In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
COPY
Safety Precautions
12
•Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
•Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
•Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
•Do not place anything, such as cloth on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
•Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
•Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
•When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
•Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
COPY
13
Getting Started
This chapter explains preparations before shooting, how to shoot in
A mode, and then how to view and erase the images you take. The
latter part of this chapter explains how to shoot and view movies and
transfer images to a computer.
Attaching the Strap/Holding the Camera
•Attach the included strap and wrap it around your wrist to avoid dropping
the camera during use.
•Keep your arms tight against your body while holding the camera firmly by
the sides when shooting. Be sure that your fingers do not block the flash or
touch the screen.
1
Strap
COPY
14
This camera has a touch panel screen that allows you to perform operations
with the touch of your finger.
Touch
Briefly touch the screen with your
finger.
zUsed for choosing icons or magnifying
images.
Drag
Touch and drag your finger across
the screen.
zUsed for playback operations such as
switching to the next image, or moving the
displayed location of magnified images.
Using the Touch Panel
Since the camera uses a pressure sensitive touch panel, the camera may
not recognize touch operations if you install a screen protector.
What if I cannot perform operations well?
When touching with your finger does not work well,
you can use the toggle attached to the strap to
perform operations. Only use the attached toggle to
perform operations. Do not use other objects, such
as pens or pencils.
You can calibrate the touch panel if you are having
difficulty choosing items or buttons (p. 170).
COPY
15
Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
zAlign the o marks on the battery and
charger, then insert the battery by sliding it
in ( ) and down ( ).
Charge the battery.
zFor CB-2LY: Flip out the plug ( ) and
plug the charger into a power outlet ( ).
zFor CB-2LYE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights red and charging
starts.
The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.
Remove the battery.
zUnplug the battery charger from the power
outlet, then remove the battery by sliding it
in ( ) and up ( ).
Charging the Battery
CB-2LY
CB-2LYE
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
COPY
Charging the Battery
16
Number of Possible Shots
• The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge
state.
Number of Shots Approx. 180
Playback Time Approx. 4 hours
Display Summary
Sufficient charge.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted. Charge the battery.
“Change the battery pack.” Depleted. Recharge the battery.
Using the battery and charger effectively
•Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
•How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.
•The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
•The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.
•If the battery is quickly depleted even after charging, it has reached the end of
its life span. Purchase a new battery.
Attach the cover to a charged battery so that
the o mark is visible.
COPY
17
The cards below can be used without restrictions on their capacities.
•SD memory cards*
•SDHC memory cards*
•SDXC memory cards *
•MultiMediaCards
•MMCplus memory cards
•HC MMCplus memory cards
•Eye-Fi Cards
* This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
Insert the included battery and a memory card (sold separately).
Check the card’s write-protect tab.
zIf the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
zSlide the cover ( ) and open it ( ).
Depending on your computer’s OS version, SDXC memory cards may not
be recognized even when using a commercially available card reader.
Check to make sure that your OS supports SDXC memory cards
beforehand.
Compatible Memory Cards (Sold Separately)
Inserting the Battery and Memory Card
COPY
Inserting the Battery and Memory Card
19
Removing the Battery and Memory Card
Remove the battery.
zOpen the cover and press the battery lock
in the direction of the arrow.
The battery will pop up.
Remove the memory card.
zPush the memory card in until you hear a
click, then slowly release it.
The memory card will pop up.
Number of Shots per Memory Card
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Memory Card 4 GB 16 GB
Number of Shots Approx. 1231 Approx. 5042
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Shooting mode (p. 25).
Number of shots that can be taken
COPY
20
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
zPress the power button.
The Date/Time screen will appear.
Set the date and time.
zTouch the option you want to set.
op will appear.
zTouch op to set a value.
Complete the setting.
zTouch Ăš.
Once the date and time have been set, the
Date/Time screen will close.
zPressing the power button will turn off the
camera.
Setting the Date and Time
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time
screen will appear each time you turn on the camera.
Daylight saving time settings
If you touch in Step 2 and then choose , you will set the time to daylight
saving (1 hour ahead).
COPY
Setting the Date and Time
21
Changing the Date and Time
You can change the current date and time settings.
Display the menu.
zAfter touching ø, touch n.
Choose [Date/Time].
zTouch the 3 tab.
zDrag up or down the screen to choose
[Date/Time].
zTouch [Date/Time].
Change the date and time.
zFollow Steps 2 and 3 on p. 20 to adjust the
setting.
zTouch Ăš twice to close the menu.
Date/Time battery
•The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack
has been removed.
•By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 39) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.
•If the date/time battery is depleted, the Date/Time screen will appear when you
turn the camera on. Follow the steps on p. 20 to set the date and time.
COPY
22
You can change the language that displays on the screen.
Enter Playback mode.
zPress the 1 button.
Display the settings screen.
zTouch and hold n.
The settings screen will appear.
Set the display language.
zTouch a display language, then touch Ăš.
Once the display language has been set,
the settings screen will close.
Setting the Display Language
What if n does not appear?
When there are images on the memory card, touch ø on the lower left of the
screen to display n.
You can also change the display language by touching ø, then
n 3. Choose the tab in the screen that appears, then choose the
[Language] menu item.
COPY
23
Before you use a new memory card or one that has been formatted in other
devices, you should format the card with this camera. Formatting (initializing) a
memory card erases all data on the memory card. As you cannot retrieve the
erased data, exercise adequate caution before formatting the memory card.
Before formatting an Eye-Fi card (p. 179), be sure to install the software
contained on the card to a computer.
Display the menu.
zTouch ø, then touch n.
Choose [Format].
zTouch the 3 tab.
zDrag up or down the screen to choose
[Format].
zTouch [Format].
Choose [OK].
zTouch [OK].
A confirmation screen will appear.
Format the memory card.
zTouch [OK].
The memory card will be formatted.
Formatting Memory Cards
COPY
Taking Pictures (Smart Auto)
26
Compose the shot.
zMoving the zoom lever toward i
(telephoto) will zoom in on your subject,
making it appear larger. Moving the lever
toward j (wide angle) will zoom out from
your subject, making it appear smaller.
(The zoom bar showing the zoom position
appears on the screen.)
Focus.
zPress the shutter button halfway to focus.
XWhen the camera focuses, it will beep
twice and AF frames will appear where the
camera focused.
Several AF frames will appear when the
camera focuses on more than one point.
Shoot.
zPress the shutter button fully to shoot.
XThe camera will play the shutter sound and
shoot. The flash will automatically fire in
low light conditions.
XThe image will appear on the screen for
approximately two seconds.
zYou can take a second picture even while
an image is displayed by pressing the
shutter button again.
Zoom bar
AF Frame
What if...
•What if the color and brightness of the images do not turn out as
expected?
The scene icon (p. 188) that appears on the screen may not match the actual
scene. If this happens, try shooting in G mode (p. 83).
COPY
Taking Pictures (Smart Auto)
27
•What if white and gray frames appear when you point the camera toward
a subject?
A white frame appears on the face or subject that the camera detected as the
main subject, while gray frames appear on other detected faces. The frames will
follow the subjects within a certain range.
If the subject moves, however, the gray frames will disappear, leaving only the
white frame.
•What if a frame does not appear on the subject you want to shoot?
The subject may not be detected, and frames may appear on the background.
If this happens, try shooting in G mode (p. 83).
•What if a blue frame appears when you press the shutter button halfway?
A blue frame appears when a moving subject is detected; the focus and
exposure will continuously adjust (Servo AF).
•What if a flashing appears?
Attach the camera to a tripod so that the camera does not move and blur the
image.
•What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is
approximately 50 cm – 5.0 m (1.6 – 16 ft.) at maximum wide angle (j), and
approximately 50 cm – 2.0 m (1.6 – 6.6 ft.) at maximum telephoto (i).
•What if the camera beeps once when the shutter button is pressed halfway?
Your subject may be too close. When the camera is at maximum wide angle
(j), move about 3 cm (1.2 in.) or more away from your subject and shoot.
Move about 40 cm (1.3 ft.) or more away when the camera is at maximum
telephoto (i).
•What if the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting
in dark areas.
•What if the h icon blinks when you try to shoot?
The flash is charging. You can shoot when recharging ends.
•What if appears when the shutter button is pressed halfway?
When you press the shutter button halfway in extremely bright shooting
conditions, will appear and the brightness will automatically adjust to
appropriate levels.
What if an icon appears in the upper left of the screen?
The icon for the determined scene will appear in the upper left of the screen. For
details on the icons that appear, see “Scene Icons” (p. 188).
COPY
Active Display
29
zPressing the 1 button again while the
lens is retracted will turn off the power.
When an image is displayed, lightly tapping the camera as shown below will
switch to the next image.
Switching to Shooting mode
Pressing the shutter button halfway while in Playback mode switches the camera
to Shooting mode.
•Be sure to put the strap around your wrist, and hold the camera firmly to
avoid dropping it.
•Depending on the way you tap the camera, images may not switch.
Active Display
Tilt the camera to switch images
If you touch and hold q on the left of the screen and tilt
the camera as shown while switching through images
(p. 28), the images advance quickly. Tilt the camera in
the opposite direction while holding r.
While dragging an image, if you touch and hold q or r the image will
appear coarse.
Switch to next image Switch to previous image
COPY
30
You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Enter Playback mode.
zPress the 1 button.
XThe last image you took will appear.
Choose an image to erase.
zDrag across the screen to choose an
image.
Erase the image.
zAfter touching ø, drag up or down the
screen to choose a, then touch the menu
item again.
X[Erase?] appears on the screen.
zTouch [Erase].
XThe displayed image will be erased.
zTo exit instead of erasing, touch [Cancel].
Erasing Images
You can also use Touch Actions to erase images (p. 131).
COPY
31
The camera will determine the subject and shooting conditions, and select the
best settings for the scene. The audio will record in stereo.
If you continue shooting for a long time, the camera may become warm. This
is not a malfunction.
Choose A mode.
zSet the mode switch to A.
Compose the shot.
zMoving the zoom lever toward i will
zoom in on your subject, making it appear
larger. Moving the lever toward j will
zoom out from your subject, making it
appear smaller.
Shoot.
zTouch .
The camera will beep once, recording will
start, and [ Rec] and the elapsed time will
appear on the screen.
zIf you change the composition of your shot
during shooting, the focus, brightness and
tone will automatically adjust.
Shooting Movies
Remaining Time
Elapsed Time
COPY
33
You can view the movies you have shot on the screen.
Enter Playback mode.
zPress the 1 button.
X appears on movies.
Choose a movie.
zDrag across the screen to choose a movie
to play back.
Play the movie.
zTouch .
XThe movie will play.
zIf you touch the screen during playback,
the movie will stop, and the movie control
panel will appear on the screen.
zDrag up or down the screen during
playback to adjust the volume.
XAfter the movie finishes, appears.
Viewing Movies
How can I play back movies on a computer?
Install the included software (p. 35).
•When watching a movie on a computer, frames may drop, it may not play
smoothly, and the audio may stop suddenly depending on the computer’s
capabilities.
•If you use the supplied software to copy the movie back onto the memory card,
you can play back the movie smoothly with the camera. For enhanced playback
you can also connect the camera to a TV.
COPY
34
You can use the included software to transfer images you have shot with the
camera to a computer for viewing. If you are already using software included
with another Canon-brand compact digital camera, install the software from
the included CD-ROM, overwriting your current installation.
System Requirements
Windows
* For Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be
installed. Installation may take some time depending on your computer’s capabilities.
Macintosh
OS Windows 7
Windows Vista Service Pack 1 and 2
Windows XP Service Pack 3
Computer model The above OS should be pre-installed on computers with built-in
USB ports.
CPU Pentium 1.3 GHz or higher (still images), Core2 Duo 2.6 GHz or
higher (movies)
RAM Windows 7 (64 bit): 2 GB or more
Windows 7 (32 bit), Windows Vista (64 bit, 32 bit): 1 GB or more
(still
images), 2 GB or more (movies)
Windows XP: 512 MB or more (still images), 2 GB or more (movies)
Interface USB
Free Hard Disk
Space
ZoomBrowser EX: 200 MB or more
CameraWindow: 150 MB or more*
Movie Uploader for YouTube: 30 MB or more
PhotoStitch: 40 MB or more
Display 1,024 x 768 pixels or higher
OS Mac OS X (v10.5 – v10.6)
Computer model The above OS should be pre-installed on computers with built-in
USB ports.
CPU Intel Processor (still images), Core 2 Duo 2.6 GHz or higher (movies)
RAM Mac OS X v10.6: 1 GB or more (still images), 2 GB or more (movies)
Mac OS X v10.5: 512 MB or more (still images), 2 GB or more
(movies)
Interface USB
Free Hard Disk
Space
ImageBrowser: 250 MB or more
CameraWindow: 150 MB or more
Movie Uploader for YouTube: 30 MB or more
PhotoStitch: 50 MB or more
Display 1,024 x 768 pixels or higher
Transferring Images to a Computer for Viewing
COPY
Transferring Images to a Computer for Viewing
35
Preparations
Windows Vista and Mac OS X (v10.5) are used for these explanations.
Install the Software.
Windows
Place the CD in the computer’s CD-
ROM drive.
zPlace the supplied CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.
Begin installation.
zClick [Easy Installation] and follow the
on-screen instructions to proceed with the
installation.
zIf the [User Account Control] window
appears, follow the on-screen instructions
to proceed.
When the installation finishes, click
[Restart] or [Finish].
Remove the CD-ROM.
zRemove the CD-ROM when your desktop
screen appears.
Macintosh
Place the CD in the computer’s CD-
ROM drive.
zPlace the supplied CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.
Begin installation.
zDouble-click the on the CD.
zClick [Install], and follow the on-screen
instructions to proceed with the
installation.
COPY
Transferring Images to a Computer for Viewing
36
Connect the camera to the
computer.
zTurn off the camera.
zOpen the cover and insert the included
interface cable’s smaller plug (p. 2) firmly
into the camera terminal in the direction
shown.
zInsert the interface cable’s larger plug into
the computer. For connection details, refer
to the user guide provided with the
computer.
Turn on the camera.
zPress the 1 button to turn on the camera.
Open CameraWindow.
Windows
zClick [Downloads Images From Canon
Camera using Canon CameraWindow].
XCameraWindow will appear.
zIf CameraWindow does not appear, click
the [Start] menu and choose [All
Programs], followed by [Canon Utilities],
[CameraWindow] and [CameraWindow].
Macintosh
XCameraWindow will appear when you
establish a connection between the
camera and computer.
zIf CameraWindow does not appear, click
the CameraWindow icon on the Dock (the
bar which appears at the bottom of the
desktop).
COPY
Transferring Images to a Computer for Viewing
37
Transfer and View Images
zClick [Import Images from Camera], and
then click [Import Untransferred Images].
XAll images not previously transferred will
transfer to the computer. Transferred
images will be sorted by date and saved in
separate folders in the Pictures folder.
zClose CameraWindow when image
transfer is complete.
zTurn off the camera and unplug the cable.
zFor details on how to view images using a
computer, refer to the Software Guide.
For Windows 7, use the following steps to display CameraWindow.
Click on the task bar.
In the screen that appears, click the link to modify the program.
Choose [Downloads Images From Canon Camera using Canon
CameraWindow] and click [OK].
Double click .
You can transfer images even without using the image transfer function in
the included software by simply connecting your camera to a computer.
There are, however, the following limitations.
•It may take a few minutes from when you connect the camera to the
computer until you can transfer images.
•Images shot in the vertical orientation may be transferred in the horizontal
orientation.
•Protection settings for images may be lost when transferred to a
computer.
•There may be problems transferring images or image information
correctly depending on the version of the operating system in use, the file
size, or the software in use.
•Some functions in the included software may not be available, such as
editing movies, and transferring images to the camera.
COPY
38
Accessories
Supplied with Camera
Wrist Strap WS-DC10 Battery Pack NB-6L with
Terminal Cover*
Battery Charger
CB-2LY/CB-2LYE*
DIGITAL CAMERA
Solution Disk
*Also available for purchase separately.
USB card reader
Windows/
Macintosh
Memory Card
Canon-Brand PictBridge Compliant Printers
TV
High-Definition TV
HDMI Cable HTC-100
Interface Cable
IFC-400PCU*
Stereo AV Cable
AVC-DC400ST*
COPY
Separately Sold Accessories
40
Other Accessories
HDMI Cable HTC-100
zUse this cable to connect the camera to
the HDMI™ terminal on a high-definition
TV set.
Printers
Canon-Brand PictBridge Compliant
Printers
zBy connecting your camera to a Canon-
brand PictBridge compliant printer, you
can print your images without having to
use a computer.
For more information, visit your nearest
Canon retailer.
SELPHY series
PIXMA series
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
COPY
41
Learning More
This chapter explains the parts of the camera and what appears on the
screen, as well as the basic operating instructions.
2
COPY
42
Mode Switch
Use the mode switch to change the Shooting mode.
Components Guide
Lens
Microphones (p. 32)
Zoom Lever
Shooting: i (Telephoto) / j (Wide
Angle) (pp. 26, 31, 55)
Playback: k (Magnify) / (Index) g
(pp. 120, 127)
Shutter Button (p. 24)
Power Button (p. 20)
Mode Switch
Lamp (pp. 58, 78, 171)
Flash (pp. 54, 85)
Speaker
Tripod Socket
DC Coupler Terminal Cover
Memory Card / Battery Cover (p. 17)
You can leave it to the camera to select settings for fully
automatic shooting (p. 25).
You can shoot with the best settings for the scene (p. 64) or
choose settings yourself to take various types of pictures
(pp. 53, 83).
COPY
Components Guide
43
Screen (LCD Monitor) (pp. 44, 187,
189)
Strap Mount (p. 13)
HDMI Terminal (p. 134)
A/V OUT (Audio/Video Output) /
DIGITAL Terminal (pp. 36, 133, 152)
1 (Playback) Button (pp. 28, 119)
Indicator (p. 45)
COPY
44
Switching the Display
You can change the screen display by touching l. Refer to p. 187 for
details on information that appears on the screen.
Shooting
Playback
Screen Display
No Information DisplayInformation Display
•Touching while in Playback mode will hide all image information and
icons, but you can still switch images (pp. 28, 29). Touch the screen to
restore the original display.
•You can also switch the display by touching l while the image
displays right after shooting. However, Simple Information Display is not
available, and image information will not display. You can change the first
screen that displays by choosing the 4 tab, then [Review Info] (p. 172).
Focus Check
Display (p. 126)
Detailed Information
Display
Simple Information
Display
COPY
47
Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The options differ
depending on the Shooting mode and the Playback mode (pp. 196 – 199).
Display the menu.
zTouch ø, then touch n.
Choose a tab.
zTouch a tab, or move the zoom lever
(p. 42) left or right to choose a tab.
Choose an item.
zDrag up or down the screen, or touch an
item to choose it.
zSome items require you to touch the item
to display a submenu in which you change
the setting.
MENU – Basic Operations
COPY
MENU – Basic Operations
48
Choose an option.
zFor items that display qr to the left and
right, touch qr to change settings.
zFor items that display a bar, touch the spot
on the bar where you want to make the
setting.
Complete the setting.
zTouch Ăš.
XThe normal screen will reappear.
COPY
49
You can silence or adjust the volume of camera sounds.
Muting Sounds
Display the menu.
zTouch ø, then touch n.
Choose [Mute].
zTouch the 3 tab.
zDrag up or down the screen to choose
[Mute], then touch qr to choose [On].
Adjusting the Volume
Display the menu.
zTouch ø, then touch n.
Choose [Volume].
zTouch the 3 tab.
zDrag up or down the screen to touch
[Volume].
Change the volume.
zDrag up or down the screen to choose an
item, then touch the point on the bar where
you want to change the volume.
Changing the Sound Settings
If you mute camera sounds, the sound will also be muted when playing
back movies (p. 33). If you drag up the screen while viewing a movie, the
sound will turn on. You can then adjust the volume by dragging up or down
the screen.
COPY
50
You can adjust the brightness of the screen.
Display the menu.
zTouch ø, then touch n.
Choose [LCD Brightness].
zTouch the 3 tab.
zDrag up or down the screen to choose
[LCD Brightness].
Adjust the brightness.
zTouch the point on the bar where you want
to change the brightness.
Adjusting the Screen Brightness
COPY
51
When you have mistakenly changed a setting, you can reset the camera to
the default settings.
Display the menu.
zTouch ø, then touch n.
Choose [Reset All].
zTouch the 3 tab.
zDrag up or down the screen to touch
[Reset All].
Reset the settings.
zTouch [OK].
XThe camera will reset to the default
settings.
Returning the Camera to Default Settings
Are there functions that cannot be reset?
•The [Date/Time] (p. 21), [Language] (p. 22), [Video System] (p. 133), [Time
Zone] (p. 169), the image registered in [Start-up Image] (p. 166), and
[Calibration] (p. 170) in the 3 tab.
•The recorded custom white balance data (p. 87).
•Colors that were chosen in Color Accent (p. 72) or Color Swap (p. 73).
•Shooting modes set when the mode switch was set to 4 (pp. 63, 111).
COPY
52
To save battery power, the screen turns off, and the camera shuts down
automatically when it is not operated for a certain time.
Power Saving during Shooting
The screen will turn off approximately 1 minute after you stop operating the
camera. After about 2 more minutes, the lens will retract and the power will
turn off. When the screen has turned off but the lens has not yet retracted,
pressing the shutter button halfway (p. 24) turns on the screen and shooting
can continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after you stop operating the
camera.
•You can turn off the power saving function (p. 168).
•You can adjust the time before the screen turns off (p. 169).
Power Saving Function (Auto Power Down)
COPY
53
Shooting with Commonly
Used Functions
This chapter explains how to use common functions, such as the self-
timer, and how to turn off the flash.
•This chapter assumes that the camera is set to A mode. When shooting
in another mode, check which functions are available in that mode (pp. 192
– 195).
3
COPY
54
You can shoot with the flash turned off.
Touch .
Choose !.
zTouch !.
zTouch ! again to make the setting.
Once set, ! will appear on the screen.
zTo turn the flash back on, follow the steps
above to choose .
Turning the Flash Off
What if a flashing appears?
When you press the shutter button halfway in low light conditions where camera
shake is likely, a flashing will appear on the screen. Attach the camera to a
tripod to prevent it from moving.
You can also choose items by touching in Step 2.
COPY
55
You can use the digital zoom to zoom up to approximately 18x maximum, and
capture subjects that are too far away for the optical zoom to enlarge.
However, depending on the recording pixel setting (p. 60) and zoom factor,
the images may appear coarse (the zoom factor will appear in blue).
Move the zoom lever toward i.
zHold the lever until zooming stops.
Zooming stops at the largest possible
zoom factor without image deterioration.
The zoom factor will appear on the screen
when you release the zoom lever.
Move it toward i again.
The digital zoom will zoom in even further
on the subject.
Zooming in More Closely on Subjects
(Digital Zoom)
Zoom Factor
Turning off the digital zoom
To turn off the digital zoom, touch ø, then touch n to choose the 4 tab,
and choose [Digital Zoom] and the [Off] option.
The focal length when using the optical zoom and digital zoom together is
approximately 24 – 420 mm, and 24 – 105 mm when using the optical
zoom alone (all focal lengths are 35mm film equivalent).
COPY
Zooming in More Closely on Subjects (Digital Zoom)
56
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.5x or
approximately 2.0x. This enables a faster shutter speed and less chance of
camera shake than the zoom (including digital zoom) used by itself at the
same zoom factor.
However, a recording pixel setting (p. 60) of or will cause images to
appear coarse (the zoom factor will appear in blue).
Choose [Digital Zoom].
zTouch ø, then touch n.
zTouch the 4 tab.
zDrag up or down the screen to choose
[Digital Zoom].
Choose the setting.
zTouch qr to choose a zoom factor.
zTouching Ăš restores the settings screen.
The view will be enlarged and the zoom
factor will appear on the screen.
zTo return to standard digital zoom, choose
[Digital Zoom] and the [Standard] option.
•The respective focal lengths when using [1.5x] and [2.0x] are
approximately 36.0 – 157.5 mm and approximately 48.0 – 210.0 mm
(35mm film equivalent).
•The digital tele-converter cannot be used together with the digital zoom.
•The shutter speeds may be the same when at maximum telephoto i,
and when zoomed in on the subject using Step 2 on p. 55.
COPY
57
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 20).
Choose [Date Stamp].
zTouch ø, then touch n.
zTouch the 4 tab.
zDrag up or down the screen to choose
[Date Stamp].
Choose the setting.
zTouch qr to choose [Date] or [Date &
Time].
zTouching Ăš restores the settings screen.
Once set, [DATE] will appear on the
screen.
Shoot.
The shooting date or time will be recorded
in the image’s lower right corner.
zTo restore to the original setting, choose
[Off] in Step 2.
Inserting the Date and Time
You can insert and print the shooting date in images which do not have an
embedded date and time as follows. However, if you do this for images with
an embedded date and time, the date and time may be printed twice.
•Use the DPOF print settings (p. 159) to print.
•Use the included software to print.
Refer to the Software Guide for details.
•Print using printer functions (p. 151).
COPY
Using the Self-Timer
59
Using the Self-Timer to Prevent Camera Shake
The camera will shoot approximately 2 seconds after the shutter button is
pressed, preventing any camera shake that occurs when pressing the shutter
button.
Choose ĂŽ.
zFollow Steps 1 – 2 on p. 58 to choose Î.
XOnce set, ĂŽ will appear on the screen.
zFollow Step 3 on p. 58 to shoot.
Customizing the Self-Timer
You can set the delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Choose $.
zTouch and $, then immediately touch
[Settings].
Choose the settings.
zTouch qr to choose a value for the
desired option.
zTouch Ăš to make the setting.
zFollow Step 3 on p. 58 to shoot.
What if the number of shots is set to two or more shots?
•Exposure and white balance settings are set with the first shot.
•If the flash fires or you set a high number of shots, the shooting interval may take
longer than usual.
•If the memory card fills, shooting stops automatically.
When you set the delay for more than 2 seconds, the lamp and self-timer
sound speed up 2 seconds before the shutter releases (the lamp remains
lit when the flash will fire).
COPY
60
You can choose from 4 recording pixel settings.
Choose the recording pixel setting.
zTouch ø, then drag up or down the
menu on the left to choose .
Choose an option.
zTouch an item you want to set.
zIf you drag up or down the menu on the
right, other items will appear.
zTouch the menu item again to complete
the setting.
XThe setting will appear on the screen.
zTo restore to the original setting, choose
in Steps 1 – 2.
You can choose from the following 2 compression ratios (image quality):
(Fine), (Normal).
Choose the compression ratio
setting.
zTouch ø, then drag up or down the
menu on the left to choose .
Choose an option.
zTouch an item you want to set.
zTouch the menu item again to complete
the setting.
XThe setting will appear on the screen.
zTo restore the original setting, choose
in Steps 1 – 2.
Changing the Recording Pixel Setting
(Image Size)
Changing the Compression Ratio
(Image Quality)
COPY
Changing the Compression Ratio (Image Quality)
61
Approximate Values for Recording Pixels and Compression
Ratio (for 4:3 Aspect Ratios)
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
• The values in the table are based on 4:3 aspect ratio. If the aspect ratio is changed
(p. 90), more images can be shot because the data size per image will be smaller than
with 4:3 images. However, since 16:9 images have a setting of 1920 x 1080 pixels,
their data size will be larger than 4:3 images.
Approximate Values for Paper Size (for 4:3 Aspect Ratios)
z For sending images as e-mail
attachments.
Recording Pixels Compression
Ratio
Single Image Data
Size (Approx. KB)
Number of Shots per
Memory Card
(Approx. shots)
4 GB 16 GB
(Large)
12M/4000x3000
3084 1231 5042
1474 2514 10295
(Medium 1)
6M/2816x2112
1620 2320 9503
780 4641 19007
(Medium 2)
2M/1600x1200
558 6352 26010
278 12069 49420
(Small)
0.3M/640x480
150 20116 82367
84 30174 123550
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard size
3.5 x 5 in.
COPY
64
The camera will select the necessary settings for the conditions in which you
wish to shoot when you choose the matching mode.
Set the camera to 4 mode.
zSet the mode switch to 4.
Choose a Shooting mode.
zTouch G.
zIf you touch qr or quickly drag left or right
across the screen, other Shooting modes
will appear.
zChoose the desired shooting mode.
XAn explanation of the chosen Shooting
mode appears on the screen.
zTouch [OK] to complete the setting.
zTouch Ăš to restore the Shooting mode
selection screen.
Shoot.
I Take portraits (Portrait)
zProduces a soft effect when
photographing people.
Shooting in Various Conditions
COPY
Shooting in Various Conditions
66
P Take shots of people in snow
(Snow)
zLets you take bright, natural-colored shots
of people against snowy backgrounds.
t Take shots of fireworks
(Fireworks)
zLets you take shots of fireworks in vivid
colors.
•In mode, hold the camera firmly while shooting as multiple images
are captured in succession.
•In t mode, attach the camera to a tripod to prevent the camera from
moving and blurring the image. Additionally, you should set [IS Mode] to
[Off] when shooting with a tripod (p. 173).
•In mode, the recording pixel setting will be fixed at (1984 x 1488
pixels).
•In V or mode, images may appear coarse because the ISO speed
(p. 88) is increased to match the shooting conditions.
•If camera shake is too strong while shooting in mode, the camera
may not be able to combine images or you may not obtain the expected
result depending on shooting conditions.
COPY
68
You can add various effects to images when shooting.
Choose a Shooting mode.
zFollow Steps 1 – 2 on p. 64 to choose a
Shooting mode.
Shoot.
Shoot images with vivid colors
(Super Vivid)
zLets you take shots with vivid, intense
colors.
Take posterized shots
(Poster Effect)
zLets you take shots that look like an old
poster or illustration.
Adding Effects and Shooting
Since you may not achieve the expected results with images shot in ,
, , and modes, try taking some test shots first.
COPY
Adding Effects and Shooting
70
Take Shots That Look Like a Miniature Model
(Miniature Effect)
Blurs chosen portions in the top and bottom of an image to produce the effect
of a miniature model.
Choose .
zFollow Steps 1 – 2 on p. 64 to choose .
XA white frame (the area that will not be
blurred) appears on the screen.
Choose the area to keep in focus.
zTouch the screen or drag the white frame
up or down to change the area to keep in
focus.
zTouch , then touch , or to
change the size of the focused area and
touch Ăš.
Shoot.
•If you touch in Step 2, the frame will switch to vertical orientation. You
can change the area to keep in focus by touching the screen or dragging
the white frame left or right. Touch again to return the frame
orientation to horizontal.
•Holding the camera vertically will change the orientation of the frame.
•Be sure to set a playback speed before shooting a Miniature Effect movie
(p. 113).
COPY
Adding Effects and Shooting
72
Changing the Color and Shooting
You can change the look of an image when shooting. However, depending on
shooting conditions, the image may become coarse, or the colors may not
come out as expected.
Color Accent
You can choose to retain a single color and change the rest to black and white
in a composition.
Choose T.
zFollow Steps 1 – 2 on p. 64 to choose T.
Touch .
XThe unchanged image and the Color
Accent image will alternately display.
zThe color for default settings is green.
Specify the color.
zPosition the center frame so it is filled with
the color you want and touch the frame on
the lower part of the screen.
XThe specified color will be recorded.
Specify the range of colors.
zTouch op to change the range of colors
to be retained.
zChoose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
zTouching Ăš restores the shooting screen.
In some shooting conditions, such as when shooting moving points of light,
the chosen shape may not show, and the brightness may be different than
expected.
Recorded color
Using the flash may cause unexpected results in this mode.
COPY
Adding Effects and Shooting
74
Shooting in Monochrome
You can shoot images in black and white, sepia or blue and white.
Choose .
zFollow Steps 1 – 2 on p. 64 to choose .
Choose a color tone.
zTouch .
X[Color Tone] will appear on the screen.
zTouch qr to choose an effect, then touch
Ăš.
XYou can check the color tone on the
screen.
Shoot.
•Using the flash may cause unexpected results in this mode.
•Under some conditions, the image may appear coarse.
B/W Shoots in black and white.
Sepia Shoots with sepia tones.
Blue Shoots in blue and white.
COPY
Adding Effects and Shooting
75
Shoot with the Effects of a Toy Camera (Toy
Camera Effect)
This effect darkens and blurs the corners of the image, and changes the
overall color so that it looks like an image shot with a toy camera.
Choose .
zFollow Steps 1 – 2 on p. 64 to choose .
Choose a color tone.
zTouch .
X[Color Tone] will appear on the screen.
zTouch qr to choose an effect, then touch
Ăš.
XYou can check the color tone on the
screen.
Shoot.
Standard Images will look like they were shot with a toy camera.
Warm Gives images a warmer tone than [Standard].
Cool Gives images a cooler tone than [Standard].
COPY
Detecting a Face and Shooting (Smart Shutter)
77
Using the Wink Self-Timer
Point the camera at a person and press the shutter button fully. The camera
will shoot approximately two seconds after it detects a wink.
Choose .
zChoose in Steps 1 – 2 on p. 64, then
touch .
zTouch , then touch Ăš.
Compose the shot and press the
shutter button halfway.
zTouch a face displayed on the screen to
choose a person to wink (Touch AF).
zConfirm that a green frame appears
around the face of the person who will
wink.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Wink to take picture] will appear on
the screen.
The lamp will blink and the self-timer
sound will play.
Face the camera and wink.
The shutter will release approximately 2
seconds after a wink is detected from the
person inside the frame.
zTo cancel shooting with the timer after
countdown has started, touch the screen.
What if a wink is not detected?
•Wink a bit slowly.
•A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
COPY
Detecting a Face and Shooting (Smart Shutter)
79
Join the subjects and look at the
camera.
When the camera detects a new face, the
lamp and self-timer sound will speed up
(the lamp remains lit when the flash will
fire), and two seconds later the shutter will
release.
zTo cancel shooting with the timer after
countdown has started, touch the screen.
Changing the number of shots
After touching in the screen in Step 1, touch op to change the number of
shots, then touch Ăš to complete the setting.
Even if your face is not detected after joining the subjects, the shutter will
release approximately 15 seconds later.
COPY
81
The camera takes 5 continuous shots, then detects various aspects of the
shot such as facial expressions, and saves only one picture detected as the
best.
Choose .
zFollow Steps 1 – 2 on p. 64 to choose .
Shoot.
When the shutter button is pressed fully,
the camera takes five continuous shots,
and saves one picture only.
Capturing the Best Facial Expressions
(Best Image Selection)
•The recording pixel setting will be fixed at (1984 x 1488 pixels).
•The focus, brightness and white balance will be set with the first shot.
•Depending on the shooting conditions, you may not obtain the expected
results.
COPY

Product specificaties

Merk: Canon
Categorie: Camcorder
Model: PowerShot ELPH 500 HS

Heb je hulp nodig?

Als je hulp nodig hebt met Canon PowerShot ELPH 500 HS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Camcorder Canon

Canon

Canon EOS C80 Handleiding

4 November 2024
Canon

Canon ML-105 EF Handleiding

16 November 2023
Canon

Canon CT-V1 Handleiding

13 November 2023
Canon

Canon EOS ELAN II/IIE Handleiding

30 Juni 2023
Canon

Canon 310XL Handleiding

17 Juni 2023
Canon

Canon Scoopic 16M Handleiding

11 Juni 2023
Canon

Canon et 8 Handleiding

11 Juni 2023
Canon

Canon Vixia Mini Handleiding

9 Juni 2023
Canon

Canon Zoom 84C Handleiding

8 Juni 2023
Canon

Canon 8EE Motor Zoom Handleiding

8 Juni 2023

Handleiding Camcorder

Nieuwste handleidingen voor Camcorder

Mio

Mio MiVue 955WD Handleiding

12 Maart 2025
Mio

Mio MiVue M820WD Handleiding

12 Maart 2025
Mio

Mio MiSentry 12T Handleiding

12 Maart 2025
Rollei

Rollei Actioncam 7s Handleiding

4 Februari 2025
Sony

Sony BRC-H780 Handleiding

28 December 2024
Nilox

Nilox X-Snap 2 Handleiding

11 December 2024
Dragon Touch

Dragon Touch Talkiecam Handleiding

6 December 2024
HP

HP f710 Handleiding

6 December 2024
HP

HP f520 Handleiding

6 December 2024
HP

HP f550g Handleiding

6 December 2024