Canon CR-X500 2A Handleiding

Canon Bewakingscamera CR-X500 2A

Lees hieronder de 📖 handleiding in het Nederlandse voor Canon CR-X500 2A (25 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/25
CR-X500 1A
CR-X500 2A
PUB. DIE-0557-000E
Remote Camera
Instruction Manual
Important Safety and Handling Instructions
2
Important Safety and Handling Instructions
Safety instructions
Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the
operator of the product or others.
In Case of Emergency (troubleshooting under abnormal
situations)
Transportation/Installation
• Do not install the product in a location where there is the risk
of ignition or combustion.
Installing the product in a location where flammable gases
are produced or concentrated may cause ignition and
result in fire.
• Securely attach any parts to the product, firmly tightening
the necessary screws according to the instruction manual.
If the product is not firmly secured or if screws are loose,
the product may topple over or fall down, resulting in injury
and accidents.
• When installing the product in an elevated location, make
sure to take appropriate measures in advance to prevent the
equipment and parts from falling off.
Equipment falling down may cause serious injury.
Power supply
• Ensure the power cable is fully inserted into the power
outlet.
• Do not handle the power cable or plug with wet hands.
• Do not leave the product plugged in for extended periods of
time in locations exposed to high levels of dust, moisture or
oily smoke.
Doing so may cause insulation failures and even fires.
• Periodically wipe the power cable, power outlet and
terminals with a dry cloth to remove dust buildup.
• Make sure to turn off the product before connecting/
disconnecting power cables.
• Do not use excessive force on the power cable.
A damaged power cable can lead to fire or electric shock.
• DC power model only:
- Make sure to use a power cable that is suitable for the
installation conditions (authorized products, environmental
regulations) and conforms to the product's power
specifications. Using an unsuitable power cable may
cause electric shock and fire.
- Remove the screws together with the power cable.
Handling
• Do not allow liquids or foreign matter inside the unit.
• Do not expose the product to strong shocks or vibration.
Maintenance and Inspection
• Unplug the power cable from the power outlet before
cleaning it using a dry cloth.
Cleaning the power cable when the product is turned on or
using a wet cloth may cause electric shock.
• Do not use organic solvents such as alcohol, benzene or
paint thinner to clean the product.
• Do not disassemble or modify the product.
- There are exposed electrodes and gears inside the
product. Contact with such parts may cause injury or
electric shock.
- Foreign objects or dust entering into the product may
cause malfunctions.
- In surroundings exposed to high temperatures and
humidity, humid air entering inside the product may cause
malfunctions and condensation.
Transportation/Installation
• Do not install the product on an unstable surface or in
locations exposed to severe vibration.
This may cause the product to topple over or fall down,
resulting in injury.
• Do not install the product in locations directly exposed to salt
water or where corrosive gases or oily smoke are present.
Contact with such substances may corrode and degrade
the mountings, causing the product to fall down and cause
injury.
• When transporting the robotic camera head, always use two
people to lift it, firmly grabbing the handles.
Dropping the product may damage it and cause injury and
accidents.
Handling
• Make sure there are no people within the product's
operating range.
The product hitting a person may cause injury.
• Inspect mountings regularly (every six months to one year)
to ensure they are securely tightened.
If any of the following situations occurs, immediately unplug
the power cable from the power outlet.
• If smoke, strange smells or abnormal noises are detected.
• If the product fell and was damaged.
• If foreign objects (metallic objects, liquids, etc.) get inside
the product.
Continuing to use the product under such circumstances
may cause fire or electric shock. Contact a Canon sales
representative as soon as possible.
WARNING
Denotes the risk of serious injury or
death.
CAUTION
Follow the cautions below. Otherwise
physical injury or property damage may
result.
Important Safety and Handling Instructions
3
Handling Precautions
Disclaimers
• Do not install the product in a location exposed to high
temperatures.
This may cause malfunctions.
• Do not turn the camera head's rotating parts forcibly by
hand.
Forcibly turning the rotating parts may damage these
parts.
Always use the control device to operate the product's
rotating parts.
• When using a model that has an AC power source, remove
the power plug to cut off power to the AC line.
All devices are fitted with a noise filter; so, there is still an
electric current in the AC line even if the power switch is
turned off.
• Do not install the product in a position where the lens is
pointed at intense light sources, such as the sun on a sunny
day, lasers and other intense artificial lights.
Doing so may damage the image sensor or the camera's
internal components.
• Beware of freezing conditions.
The product does not have a freeze-proof structure so
take precautions when installing it in locations that may
freeze. The product may not operate correctly if frozen.
• Return the housing to the horizontal position before
transporting the unit.
To avoid damage during transportation, always carry the
unit in the supplied box.
• If the supplied box is not available, contact your retailer or
Canon sales representative before purchasing packaging
materials.
Some boxes and packaging materials use adhesive or
other substances that could damage the product.
1 Canon shall bear no responsibility for damage resulting from
improper operation of this product by the customer.
2 Regarding this product's quality, functionality or instruction
manual, Canon shall make no guarantees about its
marketability or suitability for the customer's purpose.
Moreover, Canon shall not be liable for any damage, direct
or incidental, that results from using the product for the
customer's purpose.
3 Canon shall bear no responsibility for any loss, damage,
direct or indirect, or any incidental loss, damage (including
filming expenses and loss of filming earnings) arising out of
the failure of this product or arising out of the use of this
product.
4 The product specifications, configuration, and appearance
are subject to change without prior notice.
5 For further information on repairs, maintenance, or
adjustments not mentioned in this instruction manual,
contact a Canon sales representative.
6 Note that Canon may be unable to undertake servicing or
repair of a product if it is modified without consulting Canon
or your Canon sales representative.
Per l’Italia, Etichettatura ambientale: per il corretto riciclo
degli imballaggi dei nostri prodotti e articoli, visita il sito
https://www.canon-europe.com/sustainability/approach/
packaging

Product specificaties

Merk: Canon
Categorie: Bewakingscamera
Model: CR-X500 2A

Heb je hulp nodig?

Als je hulp nodig hebt met Canon CR-X500 2A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Canon

Canon

Canon PowerShot GOLF Handleiding

20 November 2024
Canon

Canon RC-IP1000 Handleiding

12 December 2023
Canon

Canon CR-N100 Handleiding

13 November 2023
Canon

Canon VB-S32D Handleiding

13 November 2023
Canon

Canon CR-N700 Handleiding

13 Juni 2023
Canon

Canon VB-C500VD Handleiding

25 Mei 2023
Canon

Canon CR-X500 2A Handleiding

18 Mei 2023
Canon

Canon CR-X500 1A Handleiding

14 April 2023
Canon

Canon PS30-VB Handleiding

29 Maart 2023
Canon

Canon VC-C50iR Handleiding

27 Maart 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Xiaomi

Xiaomi Smart Camera C400 Handleiding

30 December 2025
Axis

Axis F4105-SLRE Handleiding

27 December 2024
DIO

DIO CAM-RE02-4G Handleiding

27 December 2024
Axis

Axis Q1800-LE-3 Handleiding

23 December 2024
Honeywell

Honeywell HC35WE5R3 Handleiding

20 December 2024
Honeywell

Honeywell Performance H4W8PER2V Handleiding

20 December 2024
Hikvision

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024
TP Link

TP Link VIGI C450 Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024