Cannondale Six13 Handleiding

Cannondale Fiets E-bike Six13

Lees hieronder de 📖 handleiding in het Nederlandse voor Cannondale Six13 (2 pagina's) in de categorie Fiets E-bike. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

CANNONDALE USA (CUSA)

Cannondale Bicycle Corporation

172 Friendship Road

Bedford, Pennsylvania 15522

(Voice): 1-800-BIKEUSA

(Fax): 814-623-6173

custserv@cannondale.com

URL: http//www.cannondale.com

CANNONDALE AUSTRALIA (CA)

Unit 6, 4 Prosperity Parade

Warriewood N.S.W 2102

Australia

Phone(02)9979 5851

Fax(02)9979 5688

cannondaleaustralia@cannondale.com

CANNONDALE JAPAN (CJ)

12-5 Harayamadai

5-cho Sakai City

Osaka, Japan 590-0132

(Voice): 011.81.722.99.9399

(Fax): 0722-93-6166

cjcustserv@cannondale.com

CANNONDALE EUROPE (CE)

mail: Postbus 5100

visits: Hanzepoort 27

7570 GC Oldenzaal

Netherlands

(Voice): +31 541 573580

(Fax): 31-5415-14240

servicedeskeurope@cannondale.com

This document online at: http://www.cannondale.com/bikes/tech/

Please note that information is subject to change without notice.

5/04

Six13 High Peformance

Road Frames

Publication Title: Publication No.

XXXXXX.PDF

Page 1 of 2

116832.PDF

Owner’s Manual Supplement

CONGRATULATIONS & THANK YOU

Thank you for your purchase of a Cannondale Six13 road bike.

We manufacture Six13s by hand in our Bedford, Pennsylvania

(USA) factory. This Owner’s Manual Supplement includes

important safety and technical information for your Six13.

WARRANTY

Your Six13 is covered by the Cannondale Limited Warranty found

in your Cannondale Bicycle Owner’s Manual. Please read that

manual for complete bicycle safety information and warranty

details.

COMPATIBILITY

Seat post Diameter 27.2mm

Headset Cannondale System Integration (Si),

Campagnolo Hiddenset™ bearings

Bottom Bracket OPTION 1 - Cannondale System

Integration (Si)

OPTION 2 - Threaded English, 68mm

Front Dropout

Spacing,

100mm

Rear Dropout

Spacing

130 mm

Front Derailleur 31.8mm diameter clamp-on

Stem/fork 1 1/8” diameter headset style

CLEANING

When cleaning your Six13, use only a mild soap and water

solution. Wipe off road ﬁlm with a clean soapy towel. Rinse

with clean water and wipe dry. Never power wash your bike.

Avoid spraying water directly at frame openings (bottom

bracket, water bottle rivnuts, seat tube opening, head tube

seals).

ABOUT REPAINTING OR REFINISHING

Painting over the existing ﬁnish, reﬁnishing and repainting

your Six13 should not be done. The aluminum and carbon ﬁber

composites making up the frame are held together by some

extremely strong bonding chemicals. However, these bonds can

be attacked or weakened by reﬁnishing chemicals or abrasives.

WARNING

Repainting, paint over, retouch, or reﬁnishing your Six13

frame or fork can result in severe damage leading to an

accident. You can be severe injured, paralyzed or killed.

Reﬁnishing chemicals : Solvents, and strippers can attack,

weaken, or destroy the important composite “chemical “

bonds holding your Six13 frame together.

Abrasives or sanding the frame/fork structure, original

paint, decals, or coatings through the use of mechanical

actions such as plastic or glass bead blasting or other

abrasive methods such as sanding or scraping can remove

frame material or weaken it.

HEAD TUBE BADGES

The Head tube badges on your Six13 cover the ports used in the

manufacturing process. The badges are bonded in place. They

will remain in place under normal conditions, and should not be

taken off.

If the badges become damaged or detached from the head tube,

please have your bike inspected and the badges replaced by

your Cannondale Dealer.

UPPER BADGE

LOWER BADGE

English

Page 2 of 2

STORAGE

Drain Out Water

Water can enter through washing, condensation, wet rides, or

rain. It penetrates through water bottle bosses, seat tube, head

tube and seat post openings.

Water will not chemically harm your Six13. If it freezes, the ice

expansion can burst or crack the frame making it unsafe to ride.

This damage also NOT covered under your warranty.

Water in the bottom bracket shell drains through a small hole

in the center of the bottom bracket cable guide. Keep drain

clear. Wiggle the end of a bread tie inside the hole to dislodge

any dirt. Don’t use any sharp or pointed tools and don’t try to

enlarge this hole. DO NOT ENLARGE HOLE.

PROTECT FROM TEMPERATURE EXTREMES

• Protect your Six13 from temperature extremes when

storing or transporting it.

• Allow your Six13 to cool off or warm up before you ride

• Do not store your Six13 in places where the temperatures

will rise above 66.5C° (150°F). For example, do not leave your

Six13 lying ﬂat in a black pickup truck bed in the desert sun,

0r, under the glass of a hatchback auto.

INSPECTING FOR CRASH OR FATIGUE

DAMAGE

WARNING

AFTER A CRASH OR IMPACT:

Inspect frame carefully for damage. Do not ride your Six13

if you see any sign of damage, such as broken, splintered,

or delaminated carbon ﬁber. A delamination or break

in the adhesive bonds between aluminum and carbon

components may be present if the following are present:

an unusual or strange feel to the frame such as carbon

tubes which have a soft feel or altered shape, creaking or

other unexplained noises, visible cracks, a white or milky

color present in carbon ﬁber section.

Continuing to ride a damaged frame increases the chances

of frame failure, with the possibility of injury or death of

the rider.

SEAT TUBE & SEAT POST

(A) Seat post maximum insert

depth**

200 mm

** Six13 frames are designed and manufactured for a maximum

seat tube insertion of 200mm. Below this level, bond materials

inside the carbon section of tube could offer a slight resistance

to a seat post inserted more than 200 mm.

Make sure the inside of the seat tube is clean.

Follow the seat post manufacturer’s instructions for installing,

lubricating, or not lubricating and securing the seat post.

However, USE ONLY GREASE. See the important warnings below.

WARNING

NEVER USE LIGHT OR SPRAY OILS TO LUBRICATE A SEAT

POST OR INSIDE THE SEAT TUBE. A light ﬁlm of clean

bicycle bearing grease can be used if directed (seat post

manufacturer’s instructions).

NEVER USE SOLVENTS, OR CHEMICAL SPRAY CLEANERS TO

CLEAN THE INSIDE OF THE SEAT TUBE. Wipe out the seat

tube with a clean dry towel only.

Light oils (WD40 and oils typically used in honing) and

solvents, and including chemical cleaners can attack and

weaken composite bonds holding the frame together

leading to frame failure.

NEVER FORCE A SEAT POST INTO THE SEAT TUBE. The seat

post should be a slide ﬁt always. If the seat post is difﬁcult

to install, there is a serious problem or the seat post

extends more than 200 mm into the seat tube.

NEVER REAM OR HONE THE SEAT TUBE FOR ANY REASON.

Always have the seat post serviced and installed by a

professional bike technician.

Owner’s Manual Supplement

ALUMINUM

CARBON

English - 116832.PDF

Product specificaties

Merk:	Cannondale
Categorie:	Fiets E-bike
Model:	Six13

Heb je hulp nodig?

Als je hulp nodig hebt met Cannondale Six13 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Fiets E-bike Cannondale

Cannondale Six13 Handleiding

28 Januari 2025

Cannondale Slice RS Handleiding

28 Januari 2025

Cannondale Slice Multisport Handleiding

28 Januari 2025

Cannondale CY22 SmartSense Handleiding

28 Januari 2025

Cannondale Contro-E Speed Handleiding

28 Januari 2025

Cannondale Slice Aero Handleiding

28 Januari 2025

Cannondale Easy Rider Recumbent Handleiding

28 Januari 2025

Handleiding Fiets E-bike

Nieuwste handleidingen voor Fiets E-bike

Cube LTD plus LED light Handleiding

31 Januari 2025

Cube Grips Handleiding

31 Januari 2025

Cross E-Trendy City Nexus 7 Handleiding

24 Januari 2025

Cross 8000HT E-bike Handleiding

24 Januari 2025

Advanced TOUR 2022 Handleiding

26 Januari 2025

Trek eBike Systems 2024 - Bosch Handleiding

16 September 2024

Bikkel Magma Handleiding

3 Juli 2024

Giant RideDash Plus 2 display Handleiding

19 Februari 2024

Zundapp Z800 MTB Handleiding

11 December 2023

Zundapp C2426 Handleiding

11 December 2023