Cameo Flash Matrix 250 Handleiding

Cameo Beamer Flash Matrix 250

Lees hieronder de 📖 handleiding in het Nederlandse voor Cameo Flash Matrix 250 (56 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56
LED FLASH MATRIX 250
STROBE CHASER BLINDER
CLFM250
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
CONNECTIONS, CONTROLS AND INDICATORS 5
OPERATION 6-7
SETTING UP AND MOUNTING 7
DMX TECHNOLOGY 8
TECHNICAL SPECIFICATIONS 9
MANUFACTURER INFORMATION 9
DMX CONTROL 45-52
DEUTSCH
SICHERHEITSHINWEISE 10-11
EINFÜHRUNG 11
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 12
BEDIENUNG 13-14
AUFSTELLUNG UND MONTAGE 14
DMX TECHNIK 15
TECHNISCHE DATEN 16
HERSTELLERERKLÄRUNGEN 16
DMX STEUERUNG 45-52
FRANÇAIS
MESURES PRÉVENTIVES 17-18
INTRODUCTION 18
CONNECTEURS, CONTRÔLES ET INDICATEURS 19
UTILISATION 20-21
MISE EN PLACE ET MONTAGE 21
TECHNIQUE DMX 22
CARACTÉRISTIQUES TECHNIQUES 23
PRÉCISIONS FABRICANT 23
PILOTAGE DMX 45-52
ESPAÑOL
MEDIDAS DE SEGURIDAD 24-25
INTRODUCCIÓN 25
CONEXIONES, CONTROLES E INDICADORES 26
OPERACIÓN 27-28
INSTALACIÓN Y MONTAJE 28
TECNOLOGÍA DMX 29
CARACTERÍSTICAS TÉCNICAS 30
DECLARACIÓN DEL FABRICANTE 30
CONTROL DMX 45-52
POLSKI
ŚRODKI OSTROŻNOŚCI 31-32
WPROWADZENIE 32
ZŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 33
OBSŁUGA 34-35
USTAWIENIE I MONT 35
TECHNOLOGIA DMX 36
DANE TECHNICZNE 37
DEKLARACJE PRODUCENTA 37
STEROWANIE DMX 45-52
ITALIANO
MISURE PRECAUZIONALI 38-39
INTRODUZIONE 39
CONNESSIONI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 40
UTILIZZO 41-42
INSTALLAZIONE E MONTAGGIO 42
TECNOLOGIA DMX 43
DATI TECNICI 44
DICHIARAZIONI DEL FABBRICANTE 44
CONTROLLO DMX 45-52
ITALIANOPOLSKIESPAÑOL
FRANCAISDEUTSCHENGLISH
3
DMX
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufciently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to stronguctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does nott in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.


Product specificaties

Merk: Cameo
Categorie: Beamer
Model: Flash Matrix 250

Heb je hulp nodig?

Als je hulp nodig hebt met Cameo Flash Matrix 250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beamer Cameo

Handleiding Beamer

Nieuwste handleidingen voor Beamer