Caliber MCD 370 Handleiding

Caliber Autoradio MCD 370

Lees hieronder de 📖 handleiding in het Nederlandse voor Caliber MCD 370 (17 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/17

E N G L I S H

S P E C I F I C A T I O N S

GENERAL

Power Supply DC 11 -14V

Polarity Negative Ground

Speaker impedance 4 ohms

Power Output 4 x 55W

CD PLAYER

System Compact disc audio system

Usable disc Compact disc

Sampling frequency 44.1KHz

No of quantization bits 1bit

Frequency 5-20,000Hz

Number of channels 2 stereo

S/N Ratio 70dB

RADIO SECTION

Frequency Range 87.5-108 Mhz

Usable Sensitivity Better than 15dB at S/N 30 dB

Stereo Separation 25 dB at 1KHz

S/N Ratio 50 dB

AM/MW

Frequency Range 522-1620 Khz

Intermediate Frequency 450KHz

Usable Sensitivity Better than 45dB

S/N Ratio 40 dB

REMARK :

Specifications subject to change without notice.

1. PANEL RELEASE BUTTON

2. BAND/FILE & FOLDER SEARCH/FILE ERASE/IPOD SEARCH BUTTON

3.AF/SUBWOOFER BUTTON

4.TA/RECORD & COPY BUTTON

5. PTY/IX BASS BUTTON

6. DISC EJECT

7. POWER/MUTE BUTTON

8. ROTARY VOLUME KNOB

AUDIO SELECT/ENTER/DIAL BUTTON

9. MODE/CALL TRANSFER/DIAL BUTTON

10.AUTOMATICALLY STORE/PRESET SCAN (AS/PS)/ID3/IPOD

INFORMATION BUTTON

11. PRESET STATIONS BUTTONS (1~6)

12.PAUSE/PLAY BUTTON

13. INTRO BUTTON

14. REPEAT BUTTON

15. SHUFFLE (RANDOM) BUTTON

16. PREVIOUS FOLDER BUTTON

17. NEXT FOLDER BUTTON

18. DISPLAY BUTTON/MENU BUTTON

19. USB COVER

20.TUNING UP/DOWN,TRACK UP/DOWN BUTTONS

21. SD/MMC CARD INPUT

22. RESET BUTTON

MCD 370 GB-PT werkdoc 18-12-2006 11:07 Pagina 1

E N G L I S H

D I S C P L A Y

P R E C A U TI O N S

• Use only in a 12-volt DC negative-ground electrical system.

• Disconnect the vehicle's negative battery terminal while mounting and connecting the

unit.

• When replacing the fuse, be sure to use one with an identical amperage rating.

• Using a fuse with a higher amperage rating may cause serious damage to the unit.

• DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are

dangerous to the eyes.

• Make sure that pins or other objects do not get inside the unit; they may cause

malfunctions, or create safety hazards such as electrical shock or laser beam exposure.

• If you have parked the car for a long time in hot or cold weather, wait until the

temperature in the car become normal before operating the unit.

• Keep the volume at a level at which you can hear outside warning sounds (horns

sirens, etc.).

CD NOT E S

• Playing a defective or dusty CD can cause dropouts in sound.

• Hold CDs as illustrated.

• DO NOT touch the unlabeled side.

• DO NOT attach any seal, label or data protection sheet to either side of a disc.

• DO NOT expose a CD to direct sunlight or excessive heat.

• Wipe a dirty CD from the center outward with a cleaning cloth.

• Never use solvents such as benzine or alcohol.

• This unit cannot play 3-inch ( 8cm ) CDs.

• NEVER insert a 3-inch CD contained in the adapter

or an irregularly shaped CD.

• The unit may not be able to eject it, resulting in a

malfunction.

B E F O R E OP E RATION

• DO NOT raise the volume level too much, as this

will block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operation.

C A U T I O N

DO NOT open covers and do not repair by yourself.

Consult the dealer or an experienced technician for help.

Installation procedures

First complete the electrical connections, and then

check them for correctness.

Anti-Theft System

This unit is equipped with a detachable panel.

Removing this panel makes the radio totally inoperable.

Removing the panel

1. Switch off the power of the unit.

2. Remove the detachable panel (REL button).

3. Gently press the button of the case and open the

cover. Place the panel into the case and take it with you

when you leave the car.

Install detachable panel

1.Fix right part of face plate in the right part of panel slot

of the unit.

2.Press down the left side of the face plate until it clicks

into the panel slot of the unit.

Remove the unit

Switch of the power of the unit.

1. Remove the panel and the trim plate.

2. Insert both T-Keys into hole in front of the set until

they lock.

3. Pull out the unit.

fla

“iX

“D

1. Insert mounting bracket into the

dashboard, and bend the mounting

tabs out with a screwdriver. (Make

sure that lock lever is flush with

the mounting bracket. Not

projecting outward)

2. Secure the rear of the unit After

fixing mounting bolt and power

connector, fix the rear of the unit

to the car body by rubber cushion.

3. Insert trimplate

MCD 370 GB-PT werkdoc 18-12-2006 11:07 Pagina 2

fir

E N G L I S H

RADIO OPERATIONS

BAND SELECTION

At tuner mode, press button (2) shortly to select the desired band.The reception

band will change in the following order: FM1, FM2, FM3 and MW

STATION SELECTION

Press up or down button (20) shortly to activate automatic seek function. Press for 3

seconds until “ MANUAL” appeared on the display, the manual tuning Mode is selected.If the

buttons are not touched for more then 3 seconds it automatic goes back to “AUTO SEEK”

AUTOSTORE AS

AUTOMATIC MEMORY STORING

Press func button (10) “AS/PS” longer then three seconds , activate AS.The radio searches

for the 6 strongest stations and stores them into the preset of the currently selected band.

NOTE: Any stations that were previously stored in this memory bank are replaced by

a new station.

PRESET SCAN PS

Press func button (10) “AS/PS” for less then three seconds.The unit will pause for ten

seconds at each preset station. Press button (10) “AS/PS” again to stop scanning when

the desired station is reached.

Station store and recall

Press any one of the preset buttons (12 to 17) to recall a station which had been

stored in the memory. Press a preset button for 2 seconds, previous preset station is

overwritten by current tuned frequency.

RDS (RADIO DATA SYSTEM) OPERATIONS

The RDS data are the PI, PS,TP, PTY,TA and AF data.

PI: Program indentification code

Code for identifying program

PS: Program service name

Broadcast station name data expressed

In alphanumerically character

TP:Traffic program identification

Identification data for traffic information broadcasting station

TA:Traffic announcement identification

Identification data showing traffic information is being transmitted or not

AF:Alternative frequencies

Frequency list of broadcasting station transmitting the same program

SETTING AF MODE

Press button (3) AF for less then three seconds to select AF to be ON or OFF

Whenever AF is switched on, symbol “AF” appears on the display.

The tuner will return to Alternative Frequencies whenever the reception signals

getting worse.“ALARM” will be displayed when an emergency broadcasting is

received;meanwhile sound output level will be adjusted to the preset output level

automatically when the volume control is set at minimum.

USING PTY TO SELECT PROGRAM

The PTY function allows you to search for stations with a particular program type.

To select your program type, press the button (5) “PTY” less then three seconds.

Display will show: “pop music” or “news.

Now you can select the music type or speech type using preset keys 1 to 6 for your

selection as listed table:

Preset number PTY “pop” group PTY in “news” group

1 pop m, rock m news,affairs,info

2 easy m, light m sport,educatie,drama

3 classics, other m culture, science, varied

4 jazz, country weather, finance, childeren

5 nation m, oldies social, religion, phone in

6 folk m travel, leisure, document

While selecting PTY engagement, its selection is implemented by preset button as

described in notes.When PTY is selected, the radio starts to search corresponding

PTY information is detected. If corresponding PTY information is not found ,normal

radio reception is resumed. After the text “NON PTY” is at the display for 5 seconds.

LISTENING TO TRAFFIC ANNOUNCEMENT

Traffic announcement can interrupt CD play or radio listening when broadcast.

Briefly press the button (4) “TA” to select the TA mode on or off.When TA mode is on,

you will hear the traffic announcement when broadcast. During traffic announcement

,you can interrupt it by short press of TA button (4).Without switching off the TA mode.

By doing so,the set will return to the previous operating mode. Long press on TA

button(4) allows ON/OFF selection of EONTA LOCAL/EONTA DX

EONTA LOCAL will only allow traffic announcement from strong station to come through.

EONTA DX selection will allow all received announcements to interrupt CD play or

radio listening.

CD/MP3/WMA OPERATIONS

SELECT TRACKS

During CD operations, press button (20) “ ” for next track. Press button (20)

“ ” for previous track.Tracknumber shows on display.

During CD operation, hold button (20) “ ” for fast forward. Hold button (20)

“ ” for fast reverse. Cd will starts from when you release the button.

PAUSE

Press button (12) “ ” to pause the CD player. Press it again to resume play.

MCD 370 GB-PT werkdoc 18-12-2006 11:07 Pagina 4

Product specificaties

Merk:	Caliber
Categorie:	Autoradio
Model:	MCD 370

Heb je hulp nodig?

Als je hulp nodig hebt met Caliber MCD 370 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Autoradio Caliber

Caliber RCD 239DAB-BT Handleiding

4 Augustus 2023

Caliber RMD 806BT Handleiding

19 Juni 2023

Caliber RCD120DAB-BT Handleiding

18 Juni 2023

Caliber RMD056DAB-BT Handleiding

13 Juni 2023

Caliber CA 75 2 Handleiding

7 Juni 2023

Caliber CA 2260 Handleiding

10 Mei 2023

Caliber RMD402DAB-BT Handleiding

5 Mei 2023

Caliber RMD055 Handleiding

3 Mei 2023

Caliber MCD263BT Handleiding

30 April 2023

Caliber RMD213DAB-BT Handleiding

29 April 2023

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio

Renkforce RF-ARAR-400 Handleiding

15 December 2024

Boss MR63UAB Handleiding

11 December 2024

Alpine CTA-1505R Handleiding

8 December 2024

Alpine MRP-M850 Handleiding

8 December 2024

Pioneer AVH-A240DAB Handleiding

7 December 2024

Audio-Technica AT-RX80 Handleiding

6 December 2024

Pyle PLMR7BTW Handleiding

5 December 2024

Pyle PLTS79DUB Handleiding

5 December 2024

Pyle UPLMR15BW Handleiding

5 December 2024

Pyle PLTS73FX Handleiding

5 December 2024