Caliber Crossover CX 4 R Handleiding
Lees hieronder de š handleiding in het Nederlandse voor Caliber Crossover CX 4 R (13 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/13
Thank you for choosing a Caliber product. In doing so youāve demonstrated a
desire to own the ļ¬nest in Car Audio Technology. Caliber strives to provide you
with the ļ¬nest products possible, and is always looking for ways to please our
customers even more.
Properly installed, your Caliber CX4R will provide years of high quality sonic
reproduction. Before installing this 4-way crossover in your vehicle, please read
this entire manual carefully, in order to protect your vehicle, and get the maxi-
mum performance of your mobile sound system.
Caliber Warranty
Due to the complexity of our products,we strongly recommend that this 4-way
crossover is installed by your authorized Caliber dealer. If properly installed by
your dealer we provide a warranty for 12 month from the date of purchase.
If you install this 4-way crossover yourself, we wish you lots of fun and succes in
doing so. If you follow our guidelines, youāll get the best result. Our warranty,
however, will be limited to and not exceed 30 days from the date of purchase.
Caliber Accessories
To r ealize the exceptional performance of which this 4-way crossover is capable,
it is necessary that power sources, signal sources, speakers and interconnects
are of the highest quality. Remember that Caliber is a specialized manufacturer
of all sorts of Car Audio components. We also manufacture everything needed
for the āoptimalā Car Audio System (except the car). So be sure to āGet
Connectedā with Caliber and ask your local Caliber dealer for our accessories.
Important
The quality of installation may effect the performance and reliability of a Caliber
CX4R 4-way crossover. If you have any doubts or questions regarding installation
or use, donāt hesitate to contact your ofļ¬cial Caliber dealer.
A Caliber dealer is selected for his knowledge in auto sound, and has been trained
to give you great advice and service. You can always count on him to give you
advice for any technical problems and will keep you informed on the latest
products by Caliber.
We wish you lots of enjoyable moments with your newest toy.Adjust the sound
to perfection, but keep paying attention to the road whilst doing so.
1
BEFORE YOU START
5 Power Terminals
ā+ā Connect to the vehicleās positive 12V supply (+12V DC)
ā-ā Connect to the vehicleās ground (-12V DC)
āRā Connect to the head unitās remote turn on leads.
āD/Rā Delayed Remote output. Connect to all the ampliļ¬ers following the
CX4R.This will delay the turn on of these units by 2 seconds after the system
is powered up.
6 Remote Low Pass Level Control
Docking port for the jack of the supplied CXR Remote control.This gives
you the possibility to adjust your Low Pass Level on dash.
7-10 Output Level Controls
These allow you to adjust the output levels of all 4 different channels.
Because not all speakers (tweeters, woofers) have the same sensitivity, the
output level has to be adjusted, so the overall volume will be the same for
all speakers.
11 Band Pass Mono/Stereo Switch
This switch gives you the opportunity to set the Band Pass output in a mono
or stereo mode.This can be very usefull if you use the Band Pass output for
your rearļ¬ll or as a centerchannel.
12 Low Pass Phase Switch
This switch allows you to turn the phase of the Low Pass channel 0Ā°, 90Ā° or
180Ā°.This option can be helpfull when your subwoofers are places further
away as the rest of your speakers.This creates signiļ¬cant phase differences
which make you hardly hear any low-reproduction in the driversseat.
By turning the phase of the low pass signal, you can correct the sound level
of your Low Pass.
13 Low Pass Mono/Stereo Switch
With this switch you can choose whether to have your subwoofer(s) (Low
Pass) play in mono or stereo mode.We advice you to always let your woofers
play in mono-mode, especially when there is more than one woofer in an
enclosure.
14 Band Pass/High Pass Selector
In some installations two High Pass outputs are desirable.This selectorswitch
enables you to make a second High Pass output from the third channel.
Speciļ¬cations CX4R
Frequency response 10Hz to 30KHz Ā±1dB
T.H.D. 0.02%
Signal to noise ratio >100dB
Channel separation >80dB
Input level -12dB to 12dB (7V to 0.2V)
Input impedance 20Kā¦
Maximum output level 15V
Output impedance 50ā¦Balanced
Crossover slope 24dB/Oct
Fuse rating 1A
Dimensions W x L x H (mm) 260 x 160 x 38 (mm)
Features CX4R (See illustration on the inside cover)
1 Input
Docking ports for the RCA connectors arriving from the source unitās output.
If you choose for a two channel input, connect the RCAās to the docking-
ports 1A, and switch the input-selector-switch( ) to the single position.1C
If you decide to use the four channel input option, connect both the RCA
dockingports 1A and 1B, and switch the input-selector-switch(1C) to the
dual position. In case you use a four channel input, you can still use the fader-
adjustment from your headunit.
2 Input Level Control
This Input sensitivity control allows you to adjust the input sensitivity to
the output of your source unit, in order to get a maximal signal transmission.
3 Subsonic ļ¬lter On/Off Switch
This switch allows you to switch on or off the Subsonic ļ¬lter.The Subsonic
ļ¬lter ļ¬lters the lowest (non musical) frequencies out, which will make your
speakers (especially your woofers) sound more naturally.
4 Subsonic Frequency Adjustment
The subsonic frequency adjustment allows you to adjust the frequency which
is ļ¬ltered by the subsonic ļ¬lter. By adjusting this frequency (between 10-40Hz)
to the frequency-range of your subwoofer, you can get an optimal result.
2 3
SPECIFICATIONS AND FEATURES
SPECIFICATIONS AND FEATURES
ā¢ Second, the -12V ground terminal must be connected.The -12V ground is the
second slot(B) from the left of the powerconnector.This cable has to be faste-
ned securely to the chassis of the vehicle with the same gauge cable as the posi-
tive cable (the same amount of power has to run through it). Preferrably you
should have the same ground connection for your entire system. Ensure that all
paint,undercoating or any other insulation is removed from the area where you
want to make your ground connection to.
ā¢ Third to connect is your remote turn-on.The R (remote turn on) is the third
slot(C) from the left of the powerconnector. Many radio-cassette and CD-players
have an output terminal for connection of the Remote turn on. If you donāt have
such an output, a separate switch must be installed to control your remote
on/off functions.
ā¢ The last terminal to connect is your Delayed Remote output.The D/R (Delayed
Remote output is the ļ¬rst slot (D) from the right of your powerconnector.The
delayed remote output should be connected to all the ampliļ¬ers and other
equipment following the CX4R, so they can be started with a 2 seconds delay.
Signal input
The next to connect is your signal input. Choose the correct length and style of
RCA patch cables for your needs. Better RCAās, such as the ones from the
Caliber CL 600 and CL 800 Get Connected Series, have gold-plated connectors
and multiple layers of shielding for better noise rejection. These twisted cables
give a better result in combination with the balanced outputs. (Consult your ofļ¬-
cial Caliber dealer about these cables and RCAās).
Be extra careful when running your RCA patch cables. Car environments are
notorious for poorly insulated wires.This means that hiss, engine noise and fan
noise can easily be picked up trough RCA cables, if ran incorrectly.As a precau-
tion, avoid placing your RCAās near large wire looms and electronic fans when-
ever possible.
Connect the patch cables to the RCA output of your source unit. Run the RCA
cables to the location of the CX4R, and connect them to the input RCA con-
nectors of the CX4R. Be sure to connect the right channel to the right channel,
and the left to the left. (In an audio system the right always has red RCA con-
nectors, and the left RCA connectors are white or black).
Signal output
Once you have connected the inputs, it is time to connect the outputs. Be care-
ful to connect, via RCA patch cables, the correct output to the correct ampliļ¬er.
Ta ke good care in the balance of your signal (Right to right, and left to left).
Now that you have connected all your signal and power cables, it is time to con-
nect your battery again, and place the 1A fuse in the fuseholder.
5
SIGNAL INPUT / OUTPUT
4
MOUNTING AND CONNECTING YOUR CX4R
15-20 Modulair Resistor Units
These 16-pins modulair resistor units are what it is all about with the CX4R.
They allow you to create a really personal sound, which is especially tuned
for your installation. By changing the resistor value of these units, you can
determine your own crossoverfrequency per channel.The sequence of these
resistor units is shown in the graphics below them. So, module 1 (15) is for
the High Pass side of your Band Pass channel, and module 2 (16) is for the
Low Pass side of your Band Pass Channel, and so on.
By giving all the modules your own resistor value (and thus their own bandwidth)
you can tune your installation to perfection. How you can calculate the resistor
values for each frequency is demonstrated in a separate chapter.
21 Clipping LEDās
These clipping LEDās will warn you when an output is clipping.When they lit
up continously the output is clipping, and you should immediatly adjust the
outputlevel, or you will damage your speakers.When these LEDās start to
ļ¬icker, the output is almost clipping.This is a warning sign for you to take
extra care to the output level.
22 Outputs
Docking ports for the RCA cables which lead to the various ampliļ¬ers.
Mounting your CX4R
Find a steady, secure area to mount your CX4R. Be sure it is accessible,but not in an
area where the adjustments may be bumped by accident. Use the chassis of the
CX4R as a template and mark the locations of the mounting holes.Predrill the moun-
ting holes using a 2,5 mm diameter drill bit and use the screws supplied with your
CX4R to fasten your 4-way crossover. Make sure the screws are tightened securely.
Getting your power started
REMEMBER TO ALWAYS DISCONNECT BATTERY GROUND
BEFORE WORKING ON A VEHICLEāS ELECTRICAL SYSTEM
ā¢ First, the +12V terminal is connected.The +12V termi-
nal is the ļ¬rst slot(A) from the left of the powercon-
nector. Use the same +12V source as you are using for
your ampliļ¬ers, in order to avoid picking up noise due
to voltage differences.
Donāt forget to add an inline fuseholder holding a
1A fuse at the beginning of the powercable for the
CXQ20.This to protect both your vehicle and
audiosystem in case of a short.
+-D/R
R
A B C D
screwdriver
Product specificaties
| Merk: | Caliber |
| Categorie: | Autoradio |
| Model: | Crossover CX 4 R |
Heb je hulp nodig?
Als je hulp nodig hebt met Caliber Crossover CX 4 R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Autoradio Caliber
4 Augustus 2023
19 Juni 2023
18 Juni 2023
13 Juni 2023
7 Juni 2023
10 Mei 2023
5 Mei 2023
3 Mei 2023
30 April 2023
29 April 2023
Handleiding Autoradio
- Autoradio Philips
- Autoradio Sony
- Autoradio Panasonic
- Autoradio LG
- Autoradio AEG
- Autoradio Daewoo
- Autoradio Ford
- Autoradio Fiat
- Autoradio Grundig
- Autoradio JVC
- Autoradio JBL
- Autoradio Kenwood
- Autoradio Medion
- Autoradio Opel
- Autoradio Pioneer
- Autoradio Renault
- Autoradio Volvo
- Autoradio Adcom
- Autoradio Aiwa
- Autoradio Akai
- Autoradio Alpine
- Autoradio Audio-Technica
- Autoradio Audiosonic
- Autoradio Audiovox
- Autoradio Audison
- Autoradio Auna
- Autoradio Autovision
- Autoradio Axton
- Autoradio Becker
- Autoradio Blaupunkt
- Autoradio Boss
- Autoradio Boston Acoustics
- Autoradio Brigmton
- Autoradio Denver
- Autoradio DLS
- Autoradio Dual
- Autoradio Eclipse
- Autoradio Elta
- Autoradio Eltax
- Autoradio Emphaser
- Autoradio ESX
- Autoradio Focal
- Autoradio Fusion
- Autoradio Ground Zero
- Autoradio Harman Kardon
- Autoradio Hertz
- Autoradio Hifonics
- Autoradio Hyundai
- Autoradio Impulse
- Autoradio Kicker
- Autoradio Lanzar
- Autoradio Lenco
- Autoradio Mac Audio
- Autoradio Macrom
- Autoradio Maginon
- Autoradio Magnat
- Autoradio Manta
- Autoradio Marquant
- Autoradio MB Quart
- Autoradio Mercedes-Benz
- Autoradio MT Logic
- Autoradio Mtx Audio
- Autoradio Muse
- Autoradio Nedis
- Autoradio Nextbase
- Autoradio Parrot
- Autoradio Phonocar
- Autoradio Pure
- Autoradio Pyle
- Autoradio Renkforce
- Autoradio Revo
- Autoradio Roadstar
- Autoradio Rockford Fosgate
- Autoradio Rodek
- Autoradio RTO
- Autoradio Sanyo
- Autoradio Scott
- Autoradio Sencor
- Autoradio Sevic
- Autoradio Silvercrest
- Autoradio Skoda
- Autoradio Smart
- Autoradio Soundstream
- Autoradio Spectron
- Autoradio Stinger
- Autoradio Tamashi
- Autoradio Technaxx
- Autoradio Telefunken
- Autoradio Telestar
- Autoradio Tevion
- Autoradio Tokai
- Autoradio Toxic
- Autoradio Twister
- Autoradio Ultimate
- Autoradio US Blaster
- Autoradio Varta
- Autoradio VDO
- Autoradio VDO Dayton
- Autoradio Vieta
- Autoradio Voxx
- Autoradio VW
- Autoradio Watssound
- Autoradio Xomax
- Autoradio Zenec
- Autoradio Jensen
- Autoradio OneConcept
- Autoradio Orion
- Autoradio Overmax
- Autoradio Clas Ohlson
- Autoradio McIntosh
- Autoradio Clatronic
- Autoradio ECG
- Autoradio KrĆ¼ger And Matz
- Autoradio Naxa
- Autoradio Kunft
- Autoradio Scion
- Autoradio Clarion
- Autoradio Cobra
- Autoradio Conceptronic
- Autoradio Biltema
- Autoradio Majestic
- Autoradio Trevi
- Autoradio Crunch
- Autoradio Multilaser
- Autoradio Sendai
- Autoradio Orava
- Autoradio SPC
- Autoradio Norauto
- Autoradio Lark
- Autoradio Xblitz
- Autoradio Shuttle
- Autoradio Deaf Bonce
- Autoradio Cartronix
- Autoradio Dension
- Autoradio Raveland
- Autoradio RetroSound
- Autoradio Planet Audio
- Autoradio SoundMAX
- Autoradio Mystery
Nieuwste handleidingen voor Autoradio
15 December 2024
11 December 2024
8 December 2024
8 December 2024
7 December 2024
6 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024