Buderus 600-11R Handleiding

Buderus Ketel & boiler 600-11R

Lees hieronder de 📖 handleiding in het Nederlandse voor Buderus 600-11R (4 pagina's) in de categorie Ketel & boiler. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

7212 3000 - 08/2003 GB(EN) For the user

Please read thoroughly before operating the unit

Users manual

Wall-mounted condensing gas boiler

Buderus 600 - 11R / 19R / 24R

Preface

Subject to modifications resulting from technical improvements!

Operating instructions for Buderus 600 - 11R /19R / 24R • Edition 08/2003

Boulter Buderus Ltd. • http://www.boulter-boilers.com

1 Introduction

Dear Customer,

Your Buderus 600 Series wall-mounted condensing gas

boiler has been designed and built in accordance with

state-of-the-art technological standards and the

recognised safety rules. Special focus has been placed

on operator convenience in this respect.

Carefully read the safety instructions and operating

manual to ensure safe, economic and ecologically

beneficial use of the unit.

Due to the high efficiency of the boiler a plume of water

vapour may form at the terminal during operation.

This is normal.

Important general instructions for use

This device should only be used for its intended purpose

and in accordance with the operating instructions. It is

the law and in your own interest, and that of safety that

this boiler must be installed by a CORGI registered

installer, in accordance with the relevant requirements of

the current Gas Safety (Installation and Use)

Regulations, The Building Regulations, current I.E.E.

Wiring Regulations and the relevant British Standard

Codes of Practice.

The device may only be used in combination with the

units, accessories and spare parts listed in the

installation and servicing instructions.

Other combinations of units, accessories and

consumables are only to be used if they completely fulfil

the specifications involved, and if system performance

and safety are not affected in any way.

Subject to technical modifications

As a result of our policy of constant development,

there may be small differences with respect to

illustrations, functional steps and technical data.

G. C. Aplliance No. :

Buderus 600 - 11R 41-110-21

Buderus 600 - 19R 41-110-22

Buderus 600 - 24R 41-110-23

2 Safety precautions

ADANGER!

If you smell gas:

1. No naked flames ! Do not smoke !

2. Avoid sparks ! Do not operate electrical

switches. Do not use the telephone, plug-in

devices of any kind or the doorbell!

3. Shut off the main gas supply!

4. Open windows and doors!

5. Warn building occupants and evacuate the

building!

6. Call TRANSCO (under 'GAS' in the telephone

directory) from outside the building!

INOTE

In the event of any other type of incident, shut off

the main gas supply and electricsupply to the

appliance and seek assistance from a CORGI

registered engineer.

3 Installation area / boiler room

ADANGER!

The air intake and outlet openings must not be

reduced in size or closed.

ADANGER!

Do not store or use inflammable materials or

liquids near the heating boiler.

INOTE

To prevent the boiler from being damaged, care

must be taken not to contaminate the combustion

air with halogenated hydrocarbons (e. g.

contained in aerosol sprays, solvents, detergents,

paints, and adhesives), or with high quantities of

dust. The room in which the boiler is installed

must be frost-proof and be well ventilated.

This appliance must not be operated without the

casing fitted and forming an adequate seal.

If the boiler is installed in a compartment then the

compartment must not be used for storage

purposes.

4 Working in the heating system

ADANGER !

Only a CORGI registered Engineer is to be

entrusted with the installation of this boiler, the

gas supply and the flue connection.

Commissioning, Servicing and any Repairs must

be carried out by a competent person ie:

a CORGI Registered Engineer.

All CORGI Registered Installers carry a CORGI

identification card and have a registration

number. Both should be recorded in your boiler

logbook. You can check if your installer/engineer

is registered by telephoning 01256 372300 or by

writing to:

CORGI, 1 Elmwood, Chineham Business Park,

Crockford Lane, Basingstoke. RG24 8WG

INOTE

It is mandatory to clean and service the system

once a year ! This includes an inspection of the

entire system to see if it is in full working order.

Any faults and defects found in the course of

inspection must be rectified immediately.

It is recommended to enter into a service contract with

a specialist company.

Operating Instructions

3Operating instructions for Buderus 600 - 11R / 19R / 24R • Edition 08/2003

Boulter Buderus Ltd. • http://www.boulter-boilers.comSubject to modifications resulting from technical improvements!

5 Electricity supply

This boiler must be earthed.

A mains supply of 230 V - 50Hz is required.

Connection must be made in a way that allows complete

isolation of the electrical supply such as a double pole

switch, having a 3 mm 1/8") contact seperation in both

poles, serving only the boiler and system controls.

Alternatively, a 3-pin unswitched socket may be used.

The means of isolation must be accessible to the user

after installation.

6 Functions of the system and operating

instructions

The installer should familiarize the user with the

functions and operation of the heating system and

ensure that a complete set of technical documentation is

supplied.

7 Maintenance

The appliance should be serviced at least once a year

by a CORGI registered installer.

8 Cleaning

For normal cleaning simply dust with a dry cloth.

To remove stubborn marks and stains, wipe with a damp

cloth and finish off with a dry cloth.

DO NOT use abrasive cleaning materials.

9 Initial start-up

9.1 Operation of the boiler

9.1.1 Access to the control unit

zPress the window to open the access panel of the

control unit see fig 1.

Fig. 1 Open the window of control unit

9.1.2 Lighting and shutting down the boiler.

zPress the mains switch (see fig 2, item 1) on the

control unit to "I" to light the boiler.

zPress the mains switch to "0" to shut down the boiler.

9.1.3 Frost hazard

In the event of any risk of the heating system freezing

up, you must keep the pump switched on.

Fig. 2 Control panel

9.1.4 Temperature-setting adjustments

zSet flow temperature at the control unit (fig. 2, item 2)

(see table 1).

zAdjust room temperature to maximum setting at the

control unit.

zPush the mains power switch (fig. 2, item 1) to “I”.

The boiler runs through the start-up programme and

the burner is ignited after approx. 30 seconds.

zAdjust room temperature to desired setting at the

control unit.

INOTE

Knob pos. 3 in fig. 2 is used for service purposes

only.

* Basic setting: Have the specific system settings of the Buderus control system and burner-control unit control panel adjusted by

a specialist heating system company.

Table 1 Flow temperature

1 10 1 10

Control unit Range of application Controller position / boiler flow temperature

230 V temperature

controller

Floor heating

Radiator heating

13 (48 °C, max. factory-adjusted setting for floor heating)

17 (67 °C, min. factory-adjusted setting for radiator heating)

ON/OFF temperature

controller, 24 V

Radiator heating 15 (58 °C, new building) up to

10 (80 °C, old building)*

Product specificaties

Merk:	Buderus
Categorie:	Ketel & boiler
Model:	600-11R

Heb je hulp nodig?

Als je hulp nodig hebt met Buderus 600-11R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Ketel & boiler Buderus

Buderus 800 24T25 H Handleiding

8 Mei 2023

Buderus 600-24C Handleiding

14 April 2023

Buderus Logalux S160 Handleiding

10 April 2023

Buderus Logalux L160-2R Handleiding

7 April 2023

Buderus 500-28/C Handleiding

7 April 2023

Buderus 600-19R Handleiding

14 Maart 2023

Buderus SB625WS Handleiding

7 Februari 2023

Buderus SB745WS Handleiding

7 Februari 2023

Buderus Logalux 750 Handleiding

7 Februari 2023

Buderus 600-11R Handleiding

7 Februari 2023

Handleiding Ketel & boiler

Nieuwste handleidingen voor Ketel & boiler

Rinnai EHPA250VMAWH Handleiding

21 November 2024

Rinnai ECF29i50 Handleiding

21 November 2024

Rinnai ECF19i60 Handleiding

21 November 2024

Rinnai FM10NA Handleiding

20 November 2024

Nibe UKV 1000 Handleiding

19 November 2024

Nibe VPBS Handleiding

18 November 2024

Vaillant AtmoMAG mini 11-0/0 XZ Handleiding

16 November 2024

Teka EWH 100 Handleiding

15 November 2024

Hitachi HES-45VS Handleiding

15 November 2024

Philips AquaShield AWH1626 Handleiding

12 November 2024