Bryant Evolution 187B Handleiding

Bryant Airconditioner Evolution 187B

Lees hieronder de 📖 handleiding in het Nederlandse voor Bryant Evolution 187B (2 pagina's) in de categorie Airconditioner. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Central Air Conditioning Systems

Owner’s Information Manual

A NOTE ABOUT SAFETY

Any time you see this symbol in manuals, instructions and on

the unit, be aware of the potential for personal injury. There are

three levels of precaution:

DANGER identifies the most serious hazards which will result in

severe personal injury or death.

WARNING signifies hazards that could result in personal injury or

death.

CAUTION is used to identify unsafe practices which would result

in minor personal injury or product and property damage.

NOTE is used to highlight suggestions which will result in

enhanced installation, reliability, or operation.

PERSONAL INJURY, DEATH AND / OR PROPERTY

DAMAGE HAZARD

Failure to follow this warning could result in personal injury,

death or property damage.

Improper installation, adjustment, alteration, service,

maintenance, or use can cause explosion, fire, electrical shock,

or other conditions which may cause personal injury or

property damage. Consult a qualified installer, service agency,

or your distributor or branch for information or assistance. The

qualified installer or service agency must use

factory--authorized kits or accessories when modifying this

product.

Read and follow all instructions and warnings, including labels

shipped with or attached to unit before operating your new air

conditioner.

!WARNING

ABOUT YOUR AIR CONDITIONING SYSTEM

Identifying Your System

Your new Bryant air conditioning system is what we call a ”split

system.” It has an outdoor unit and an indoor unit connected to

each other with copper tubing called refrigerant lines. Each of

these units has a rating plate with the model and serial numbers

you will need to reference when calling an authorized Bryant

dealer about your system.

Take a few moments now to locate those numbers and record them

in the spaces provided on the cover of this booklet.

USING YOUR NEW BRYANT SYSTEM

Your Bryant air conditioning system is controlled by a

wall--mounted thermostat installed inside your home. Because

there are so many thermostats available, please refer to the owner’s

manual supplied with your thermostat for complete details on

system operation.

EVOLUTIONtOPERATION

If you own an Evolutionttwo--stage air conditioning system, you

may notice your system runs for longer periods of time. Nearly

80% of the time it’s running, it is operating in low--stage, and your

indoor temperature will remain more consistent with fewer drafts,

better humidity control, enhanced comfort and enhanced energy

efficiency.

COOLING YOUR HOME

For cooling operation, make sure the System or Mode control is set

for Cooling. Then, adjust the Temperature control to your desired

setting. Finally, use the Fan control to select Automatic (turns on

and off as cooling is needed) or On (runs continuously).

OPERATION UNDER EXTREME

CONDITIONS

Your air conditioner will run as long as necessary to maintain the

indoor temperature selected on your thermostat. On extremely hot

days, your air conditioner will run for longer periods at a time than

on moderate days. Your system will also run for longer periods of

time under the following conditions:

SFrequent opening of exterior doors

SOperating laundry appliances

STaking hot showers

SMore than the usual number of people present in the home

SMore than the normal number of electric lights in use

SDrapes or blinds are open on the sunny side of the home

ROUTINE MAINTENANCE

Simple, routine maintenance as described below will enhance your

air conditioning system’s ability to operate economically and

dependably. Always remember the following safety precautions:

!WARNING

ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury

or death.

Disconnect all electrical power to the indoor air handler or

furnace before removing access panels to perform any

maintenance. Disconnect power to both the indoor and

outdoor units.

NOTE: There may be more than one electrical disconnect switch.

A07909

Main

Disconnect

Indoor

Disconnect

Outdoor

Disconnect

Thermostat

Fig. 1 -- Electrical Disconnects

PERSONAL INJURY AND/OR PRODUCT AND

PROPERTY DAMAGE HAZARD

Failure to follow this caution may result in personal injury or

product and property damage.

Although special care has been taken to minimize sharp

edges in the construction of your unit, be extremely careful

when handling parts or reaching into the unit.

CAUTION

Always Ask For

SKeep Filter Clean

A clogged or improperly installed air filter on your indoor unit will

increase operating costs and shorten the life of the unit. For

detailed filter cleaning information refer to indoor unit literature.

SDo Not Block Floor, Wall or Ceiling Vents

When drapes, furniture, toys or other common household items

block vents, the restricted airflow lessens the system’s efficiency

and life span.

SDo Not Cover or Block Outdoor Unit

The outdoor unit needs unrestricted airflow. Do not cover it or

place items on or next to it. Do not allow grass clippings, leaves, or

other debris to accumulate on the sides or top of the unit. And,

maintain a 12” (304.8 mm) minimum clearance between the

outdoor unit and tall grass, vines, shrubs, etc.

SCheck Condensate Drain

Your air conditioner removes humidity from your home during the

cooling season. After a few minutes of operation, water should

trickle from the condensate drain of the indoor coil. Check this

occasionally to be sure the drain system is not clogged. Drainage

will be limited if you live in a very dry environment.

SDo Not Operate Below 55°F/12.78°C

Your outdoor unit is not designed to operate when outdoor

temperatures are lower than 55_F/12.78_C without modification.

If operation below this temperature is required, consult your Bryant

dealer.

SCoil Cleaning

Your indoor coil is located in a sealed cabinet on your indoor unit

and will require minimal cleaning with routine filter maintenance.

Longer operating cycles and reduced energy efficiency may

indicate the need for a coil cleaning by your Bryant dealer.

SBase Pan Drainage

Periodically check for and remove debris that has settled around

the base of your outdoor unit. This will ensure proper drainage of

the base pan and eliminate standing water inside the outdoor unit.

SLevel Installation

Your Bryant dealer will install the outdoor unit in a level position.

If the support base settles or shifts and the unit is no longer level,

be sure to re--level it promptly to assure proper drainage. If you

notice water or ice collecting beneath the unit, arrange for it to be

drained away from the unit.

SEA COAST COIL MAINTENANCE

Coastal locations often require additional maintenance of the

outdoor unit due to highly corrosive airborne ocean salt. Although

your new Bryant system is made of galvanized metal and is

protected by top--grade paint, take the additional precaution of

periodically washing all exposed surfaces and the outdoor coil

approximately every 3 months. Consult your installing Bryant

dealer for proper cleaning intervals and procedures for your

geographic area or ask about a service contract for regularly

scheduled professional cleaning and inspections.

TROUBLESHOOTING

Before you request dealer service, check for these easily solved

problems:

SCheck the indoor and outdoor disconnect switches Also check

your main electrical panel circuit breakers or fuses.

SCheck for sufficient airflow. Air filter(s) should be reasonably

clean and interior vents should be open and unobstructed.

SCheck thermostat settings. For cooling, your desired

temperature setting should be LOWER than the displayed

room temperature, and the System/Mode control should be on

Cool or Auto. For heating, your temperature setting should be

HIGHER than the displayed room temperature, and the

System/Mode control is set to Heat or Auto.

STime delays - depending on the Bryant air conditioner you

have, there may be delays in unit operation that are built-in to

protect the equipment and your comfort. Don't be alarmed if

you notice a time delay in operation. It may be a standard

protection feature of your equipment. Check with your Bryant

Dealer for more information on time delays.

If you need to contact your Bryant dealer for troubleshooting

and/or repairs, be sure to have the model and serial numbers of

your equipment available (there are spaces on the cover for you to

write this information). With this information, your dealer may be

able to offer helpful suggestions over the phone or save valuable

time through knowledgeable preparation for the service call.

REGULAR DEALER MAINTENANCE

In addition to the routine maintenance that you perform, your

home comfort system should be inspected regularly by a properly

trained service technician. Many dealers offer this service at a

reduced rate with a service contract. Some service contracts offer

additional benefits such as parts discounts and no additional charge

for ”after hours” or emergency service.

Your annual system inspection should include:

SRoutine inspection of air filter(s) with replacement or cleaning

as required

SInspection and cleaning of the blower wheel housing and

motor

SInspection and, if required, cleaning of indoor and outdoor

coils

SInspection of the indoor coil drain pan, as well as the primary

and secondary drain lines. If the system has an auxiliary drain

pan and line, they should be inspected at this time as well.

Service should include cleaning if required.

SCheck all electrical wiring and connections

SCheck for secure physical connections of individual parts in

each unit

SOperational check of the air conditioning system to determine

actual working condition. Necessary repair and, or adjustment

should be performed at this time.

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

E2007 Bryant Heating & Cooling Systems D7310 W. Morris St. DIndianapolis, IN 46231 Printed in U.S.A. Edition Date: 11/07

R e p l a c e s : OM 0 1 --- 2 4

Catalog No. OM01---25

Product specificaties

Merk:	Bryant
Categorie:	Airconditioner
Model:	Evolution 187B

Heb je hulp nodig?

Als je hulp nodig hebt met Bryant Evolution 187B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Airconditioner Bryant

Bryant Evolution 180B Handleiding

22 December 2022

Bryant Preferred 538A Handleiding

22 December 2022

Bryant Legacy 116B Handleiding

22 December 2022

Bryant Evolution 187B Handleiding

22 December 2022

Handleiding Airconditioner

Nieuwste handleidingen voor Airconditioner

SMD Afstandsbediening Handleiding

18 Maart 2023

Fujitsu ASYG 30LF Handleiding

5 Februari 2023

Fujitsu ASYG 07LE Handleiding

5 Februari 2023

Fujitsu AOT90TP Handleiding

5 Februari 2023

Rowenta AU4010 F0 - Intense Cool Handleiding

2 Januari 2023

Olimpia Splendid ARYAL S1 E TRIAL INVERTER 21 Handleiding

2 Maart 2023

Fakir Airwell Handleiding

5 Februari 2023

D-Let KF-25 9000 Btu Handleiding

4 Januari 2023

Sinclair AMC-11P Handleiding

2 Januari 2023

Inventor P9VI32 Passion Eco Handleiding

8 Maart 2023