Brother PT-1290 Handleiding

Brother Labelprinter PT-1290

Lees hieronder de 📖 handleiding in het Nederlandse voor Brother PT-1290 (3 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Introduction

With your PT-1290, you can create labels for any

application. Select from the many frames, character sizes

and styles to design beautiful custom labels. In addition, the

variety of tape cartridges available allows you to print labels

with different widths and exciting colors.

Read this manual carefully before starting and keep the

manual in a handy place for future reference.

Safety Precautions

Warning

Follow these guidelines to avoid fire, burn, injury,

electric shock, rupture, heat, abnormal odor and

smoking.

• Always use the specified voltage and the suggested AC adapter

(AD-24ES) for this machine to prevent any damage or failure.

• Unplug the power cord immediately and stop using the P-touch

labeler during an electrical storm.

• Do not use the machine/AC adapter in places of high humidity such

as bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug.

Do not forcibly bend or pull the power cord. When disconnecting the

power cord from the power outlet, always hold the plug.

• Make sure that the plug is fully inserted to the power outlet. Do not

use an outlet that is loose.

• Do not swallow the cutter stopper.

• Do not get the machine/AC adapter/power plug wet, such as by

handling them with wet hands or spilling beverages on to them.

• Do not disassemble or modify the P-touch labeler/AC adapter/

batteries.

• Do not use metallic objects, such as tweezers or a metallic pen,

when changing the batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC adapter and remove batteries immediately and

stop using the machine if you notice abnormal odor, heat,

discoloration, deformation or anything unusual while using or

storing it.

Caution

Follow these guidelines to avoid personal injury, liquid

leakage, burn and heat.

• Do not touch the edge of the cutter or any metal parts near the print

head.

• Remove the batteries and disconnect the AC adapter if you do not

intend to use P-touch labeler for an extended period of time.

• When power is disconnected for more than three minutes, all text,

format settings and any text files stored in the memory will be

cleared.

• Do not use old and new batteries together or mix alkaline batteries

with other type batteries, or set the positive and negative end in the

wrong position.

• Do not drop or hit the P-touch labeler/AC adapter.

• Do not press hard on the LCD display.

• Do not put your finger between the covers when you close the back

cover.

General Precautions

• Depending on the location, material, and environmental conditions,

the label may unpeel or become irremovable, the color of the label

may change or be transferred to other objects. Before applying the

label, check the environmental condition and the material.

• Do not use the P-touch labeler in any way or for any purpose not

described in this guide. Doing so may result in accidents or damage

the machine.

• Use only Brother TZ tapes with this machine. Do not use tapes that

do not have the mark.

• Only use a soft, dry cloth to clean the labeler; never use alcohol or

other organic solvents.

• Use a soft wipe to clean the print head; never touch the print head.

• Do not put any foreign objects into the tape exit slot or AC adapter

connector, etc.

• Do not place the P-touch labeler/battery in direct sunlight or rain,

near heaters or other hot appliances, in any location exposed to

extremely high or low temperatures (e.g. on the dashboard or in the

back of your car), high humidity, or dusty locations.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print

head.

• Do not pull the tape while printing or feeding; it will damage the tape

and machine.

• Any data stored in memory will be lost due to failure or repair of the

P-touch labeler, or if the battery expires.

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Important

• Changes or modifications not expressly approved by Brother

Industries, Ltd. could void the user’s authority to operate the

equipment.

Power Supply and Tape Cassette

Open the cassette cover by pressing the

above indicated area at the top end of the

machine.

If a tape cassette is already installed, remove it by

pulling it straight up. Also, if batteries are already

installed, remove them.

• Make sure that the power is turned off when

replacing batteries or tape cassettes.

Insert six new AAA alkaline batteries

(LR03), making sure that their poles

point in the correct directions. Always

replace all six batteries at the same time

using brand new ones.

Insert a tape cassette, making sure that

it snaps into place.

• Make sure that the end of the tape feeds under

the tape guides.

• If the ink ribbon is loose, use your finger to wind

the toothed wheel in the direction of the arrow

on the cassette.

• Use only Brother TZ tapes with this machine.

Securely close the cassette cover, making

sure that it snaps into place.

After you have installed the tape, feed the tape (see

“Feeding”) once and then push in the tape cutter

lever to cut the tape.

NOTE

When using optional AC adapter (AD-24ES)

1. Insert the plug on the adapter cord into the AC adapter

jack on the top end of the machine.

2. Insert the plug into the nearest standard electrical outlet.

For memory back up, we recommend using AAA alkaline

batteries (LR03) together when using the AC adapter.

1Print head

Tape cutter lever

Cassette

cover

Toothed

Wheel

Cutter’s

edge

End of tape

Tape

exit slot

Tape guide

AC adapter jack

LCD Display & Keyboard

NOTE

The LCD shows one row of 15 characters; however, the

text that you enter can be up to 80 characters in length.

1. Size

2. Font

3. Cursor

4. Caps

5. Width

6. Style

7. Underline/Frame

8. Label Length

9. Escape key

10. Power key

11. Function key

12. F1 key

13. F2 key

14. Character key

15. Tab key

16. Caps key

17. Shift key

18. Symbol key

19. Auto Format key

20. Cursor key (Use with

Shift key to go to top/

end of the text.)

21. Print key

22. Preview key

23. OK key

24. DECO MODE key

25. Backspace key

26. Enter key

27. Accent key

28. Space key

Initial Settings

1Start your machine.

Supply power by using six AAA alkaline batteries or the

optional AC adapter, and then press .

2Set the language.

The default setting is [English].

[ Language]

[English/Español/Français/Hrvatski/Italiano/

Magyar/Nederlands/Norsk/Polski/

Português/Română/Slovenski/Slovenský/

Suomi/Svenska/Türkçe/český/Dansk/

Deutsch] .

3Set the unit of measurement.

The default setting is [inch].

[Unit]

[inch/mm] .

NOTE

• The machine automatically turns off if no keys are

pressed within five minutes.

• To cancel operations, press .

Troubleshooting

X XError message What to do when...

Message Cause/Remedy

Battery Weak! The batteries are weak. Replace them with

new ones.

Check Battery! The installed batteries are running low.

Invalid!

• There is no text above the cursor when you

selected [Numbering].

• Invalid character is selected for [Numbering].

• Invalid number is selected for [Tab Length]

or [Label Length].

No Text!

• You tried to print a text file when there is no

data stored in the memory.

• is pressed when no text is entered.

• You tried to select [Copies], [Numbering],

[Mirror], or Text Preview when no text is

entered.

Line Limit!

• You tried to enter a 3rd line by pressing

• You tried to print a 2 line text when 9/64"

(3.5mm) or 1/4" (6mm) tape is installed.

No Cassette! You tried to print a label when there is no

cassette installed.

Cutter Error! Tape cutter lever is used in the middle of

printing process.

Full! The maximum number of characters (80

characters, 50 characters for DECO MODE)

have already been entered.

Text Too Long! The text length exceeds the selected label

length, Auto Format setting length and DECO

MODE setting length.

No Frame OK?

Printing on 9/64" (3.5mm) tape with invalid

Frame setting ON. (Select to print with

no Frame, to cancel.)

OK to Feed? Feeding tape after printing when [Chain print]

is selected. Refer to “Setting Margin”.

Cooling

If the print head becomes too hot, your

machine will stop printing and automatically

start to cool down. The cool down time will be

displayed. Once the print head is cool, printing

will automatically continue.

Do not touch the P-touch labeler while cooling.

Insert 1/2" (12mm)! Only 1/2"(12mm) tape cassette is available for

DECO MODE.

Message Cause/Remedy

Problem Solution

The display stays

blank after you

have turned on the

machine.

• Check that the batteries are correctly

inserted.

• If the batteries are weak, replace them.

• Check that the AD-24ES adapter is correctly

connected.

When the label is

printed out, there is

too much margin

(space) on both

sides of the text.

• See “Setting Margin” in this users guide and

select [Half] or [Narrow] to have smaller

margins for your label.

The machine does

not print, or the

printed characters

are not formed

properly.

• Check that the tape cassette has been

inserted correctly.

• If the tape cassette is empty, replace it.

• Check the cassette cover is properly closed.

The setting has

cleared on its own.

• The batteries may be weak. Replace them.

• When power is disconnected for more than

three minutes, all text & formats in the

display will be lost. Language and Unit

settings will also be cleared.

A blank horizontal

line appears

through the printed

label.

• There maybe some dust on the print head.

Remove the tape cassette and use a dry

cotton swab to gently wipe the print head

with an up-and-down motion.

The machine has

“locked up” (i.e.,

nothing happens

when a key is

pressed, even

though the

machine is on.)

• Refer to “Resetting the P-touch”.

The power turns off

when you try to

print.

• The batteries may be weak. Replace them.

• Check that the batteries are correctly

inserted.

The tape does not

feed properly or the

tape gets stuck

inside the machine.

• Check that the end of the tape feeds under

the tape guides.

• The cutter lever is used while printing. Do

not touch the cutter lever during printing.

All text and format

settings need to be

cleared to create a

new label.

• Press + and select

[Text&Format].

To change

language setting. • Refer to “Initial Settings”.

Problem Solution

Entering Text

XSetting Font

(Helsinki) or (Bohemia)

Label image (Helsinki) Label image (Bohemia)

XSwitching Upper Case/Lower Case

Upper case ( ON) Lower case ( OFF)

XMaking Two Lines of Text

Move the cursor to where the second line starts and press

Use either 3/8" (9mm) or 1/2" (12mm) wide tape for two line

text.

Display Label image

XEntering Symbols

Choose a symbol with and

press .

• Refer to the table of symbols (A) on the enclosed insertion

sheet for a list of available symbols.

• To go to the next group, press .

• To cancel operations, press .

XEntering Accented Characters

- /

• Refer to the table of accented characters (B) on the

enclosed insertion sheet for a list of available accented

characters.

• To cancel operations, press .

• The order of accented characters differs by the selected

LCD language.

XTo Clear

By pressing , the letters will be deleted one by one.

To delete all text and settings :

+ [Text&Format]

To delete text only :

+ [Text Only]

Designing Labels

1Press , use to select a function under column [A], and then press . (The function

can also be selected with the shortcut keys listed under column [C]. ( + to ))

2Use to select a setting listed under column [B], and then press .

*1 There are the default settings. To return to the default setting, press .

*2 Frames can not be printed on 9/64" (3.5mm) tape.

*3 You can also select the length by entering the length with Number keys. To turn to [Auto], press .

Design [A] [B] Label image [C]

Size Size

Large*1

Medium

Small

Width Width

Normal*1

x 2

x 1/2

Style Style

Normal*1

Bold

Outline

Shadow

Italic

Italic Bold

Italic Outl (Italic Outline)

Italic Shadow

Vertical

Underline/Frame

*2Underline/Frame

Off*1

Underline

Round

Leaf

Tile

Star

Heart

Square

Clip

Tab Tab • The cursor should be positioned where you set to tab.

• You can also set a tab by using the Tab key on the keyboard.

Tab length Tab Length Auto

/0.0"-4.0"

(0-100mm)*

The tab is set with the specified length.

Label length Label Length

Auto*

/1.2"-12.0" (30-300mm)*

The label is printed with the specified length.

Auto format Auto Format

Off*1—

VHS Spine 5.5" (140mm)

MiniDV Spine 1.6" (42mm)

Audio Tape 3.5" (89mm)

CD Case Spine 4.4" (113mm)

File Tab 3.2" (82mm)

Divider Tab 1.6" (42mm)

Printing Labels

XText Preview

You can preview the text before printing.

• The LCD shows the whole text and the label length (inch/

mm), then returns to the original text.

• Only the text can be previewed, not the font, style, size,

underline/frame or any additional features.

XFeeding (Tape Feed)

XSetting Margin ( + )

[Margin]

[Full/Half/Narrow/Chain Print]

[Full]/[Half]/[Narrow]

For leaving equal margins on both sides of the text.

[Chain Print]

For creating a label containing text in various styles.

1. Enter text.

2. Press , then [OK to Feed?] appears.

3. Press to enter more texts. Press to feed and

print.

NOTE

• When [Half] or [Narrow] is set, feed the tape before using

the cutter otherwise a part of the text may be cut off. Also,

cut along the printed dots (:) with scissors so the text is

centered in the label.

• To print more than 1 copy of a label with minimum margin,

set the margin [Narrow] and select [Copies] for [Print

Options] function.

• Do not try to pull the tape since this may damage the tape

cassette.

XPrinting

• To prevent damage to the tape, do not touch the cutter

lever while the message “Print” or “Feed” is displayed.

• To cut off the label, push in the tape cutter lever on the

upper-right corner of the machine.

• Peel the printed label from backing and apply the label.

XUsing Print Options ( + )

[Copies]

You can print up to 9 copies of each label.

• To print more than 1 copy of a label with minimum margin,

set the margin to [Narrow] and select [Copies] for [Print

Options] function.

[Print Options]

[Copies]

• You can also select the number of copies by entering with

Number keys.

[Numbering]

You can print many copies of the same text while increasing

a selected number by 1 after each label is printed.

Example: To print copies of a label containing a serial

number (0123, 0124 and 0125)

[Print Options]

[Numbering]

• Select the highest number you wish to be printed when

setting the number.

[Mirror]

[Print Options]

[Mirror] [Mirror Print?]

• Use clear tape in [Mirror], so the labels can be read

correctly from the opposite side when attached on glass,

windows or other transparent surfaces.

Resetting the P-touch

You can reset the P-touch labeler when you want to

initialize the settings, or in the event the P-touch labeler is

not working properly.

1Turn off the P-touch labeler and then while

holding down and , press to turn

the P-touch back on.

2Release and .

The P-touch labeler turns on with the internal memory

reset.

NOTE

All text, settings and stored files are cleared.

DECO MODE

This function allows you to create unique labels by using

some built-in templates. Refer to the DECO MODE format

table (C) on the enclosed insertion sheet.

Example: Design 10

[Design 10]

[Auto/1.2"-7.8"

(30-200mm)]

Bill Anderson

ABC Company, Inc. [Print OK?]

NOTE

• Some formats checked on [C] in the DECO format table

need cooling. If the print head becomes too hot, your

machine will stop printing and automatically start to cool

down. The cool down time will be displayed. Once the

print head is cool, printing will automatically continue.

Do not touch the P-touch labeler while cooling.

• If you select a format that is one line (Design 1 - Design

9), only enter the text one time.

• Depending on the format you have selected, the entire

contents of your text may not be printed.

• The DECO MODE templates cannot change format.

• The highlighted symbols in the table of symbols (A) on the

enclosed insertion sheet are available in DECO MODE.

• To clear all text, press and , then “Clear?”

appears. Press to clear. Press to cancel.

• When you access DECO MODE, your most recently

printed DECO MODE text and label length will be

recalled.

• Press to return to the previous step.

• To exit DECO MODE, press until the display shows

the text entry screen.

• DECO MODE feature is only available when using 1/2"

(12mm) wide tape cassettes.

• The maximum label length is 7.8" (200mm) for DECO

MODE.

• When [Auto] is selected for “Label Length”, the label will

automatically adjust to the correct size for printing the text

one time.

• Press to return to the [Auto] setting for “Label

Length” mode.

Saving Label Files

XMemory ( + )

You can save your original labels on to your machine. Up to

nine labels can be saved and recalled for printing at a later

date. You can also edit and overwrite the stored label.

[File]

To Save: [Save]

To Print: [Print]

To Open: [Open]

NOTE

If you try to store a label when there is already a label

stored to that number, a message “Overwrite?” will appear.

Press to save your new label. Press to cancel.

Specifications

Accessories

If the cutter blade becomes blunt after repetitive use and the

tape cannot be cut cleanly, replace with new cutter unit

(stock no. TC-5) by obtaining from an authorized Brother

reseller.

1/2" 1/2" 1/6"1/6"

ABC ABC: ABC:

Full Half Narrow

ABC ABC

DEF

Chain Print

(feed & cut)

Dimensions:

(W x D x H)

6.26" × 6.18" × 2.43"

(159 × 157 × 61.7mm)

Weight: 1.07 lb. (485 g)

(without batteries and tape cassette)

Power supply: Six AAA alkaline batteries (LR03)

Optional AC adapter (AD-24ES)

Tape cassette: Brother TZ tape (width)

9/64" (3.5mm), 1/4" (6mm),

3/8" (9mm), 1/2" (12mm)

Tape Cassettes: See the included “Supplies and

Accessories Guide”.

AC Adapter: AD-24ES

Cutter Unit: TC-5 (replacement)

CAUTION

• Do not touch the cutter blade directly with your fingers.

• Do not swallow the cutter stopper.

Should you encounter any problems with your product,

please do not return your product to the store!

After referring to the User's guide, if you still need

assistance, call Brother Customer Service at:

Voice: 1-877-BROTHER

Web: www.brother-usa.com

Fax: 1-901-379-1210

If you need to locate a service center, please call

1-877-BROTHER or visit us at www.brother-usa.com

ELECTRONIC LABELING SYSTEM

User’s Guide

English

Español

Printed in China

LW3866001A

PT 1290

PT 1290PT 1290

Caps Caps

01/14 08/14

02/14 09/14

03/14 10/14

04/14 11/14

05/14 12/14

06/14 13/14

07/14 14/14

A a

C c

D d

E e

G g

I i

K k

L l

N n

O o

R r

S s

T t

U u

Y y

Z z

Stampato in Cina

Impreso en China

Impresso na China

LW3867001

Printed in China

Gedruckt in China

Imprimé en Chine

Gedrukt in China

PT-1290_Insertion.fm Page 1 Monday, February 9, 2009 6:28 PM

1[C]

1BROTHER

–

2BROTHER

–

3BROTHER

–

4BROTHER

–

5BROTHER

–

6BROTHER 3

–

7BROTHER 3

–

8BROTHER 3

–

9BROTHER 3

–

10 Bill Anderson

ABC Company, Inc.

11 Bill Anderson

ABC Company, Inc.

12 Bill Anderson

ABC Company, Inc.

13 Bill Anderson

ABC Company, Inc.

14 ABC Company, Inc. 3

Bill Anderson

15 Bill Anderson

ABC Company, Inc.

PT-1290_Insertion.fm Page 2 Monday, February 9, 2009 1:34 PM

Product specificaties

Merk:	Brother
Categorie:	Labelprinter
Model:	PT-1290
Kleur van het product:	Zwart, zilver
Gewicht:	485 g
Breedte:	159 mm
Diepte:	157 mm
Hoogte:	62 mm
Beeldscherm:	LCD
Ondersteund aantal accu's/batterijen:	6
Maximale resolutie:	180 x 180 DPI
Printtechnologie:	Thermo transfer
Netwerkgereed:	Nee
Toetsenbordindeling:	QWERTY
Afmetingen (B x D x H):	159 x 157 x 62 mm
Printsnelheid (metrisch):	10 mm/sec
Maximale label breedte:	12 mm
Batterijtechnologie:	Alkaline
Type batterij:	AAA
Aantal afdrukbare regels:	2
Afdrukvoorbeeld:	Ja
Geheugen capaciteit:	80 tekens
Maximale label lengte:	0.3 m
Labelgeheugen:	9 etikett(en)
Soort tape:	TZ
Aantal letterstijlen:	8
Onderstrepen:	Ja
Vaste labellengte:	Nee
Autocutter:	Nee
Verticaal printen:	Ja
Afsnijden:	Handmatig