Brother P-touch PT-1830 Handleiding

Brother Labelprinter P-touch PT-1830

Lees hieronder de 📖 handleiding in het Nederlandse voor Brother P-touch PT-1830 (2 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

USER'S GUIDE

USER'S GUIDEUSER'S GUIDE

www.P-touch.com

LN7589001

Printed in China

English

With your PT-1830, you can create labels for any application. Select from the

many frames, character sizes and styles to design beautiful custom labels. In

addition, the variety of tape cartridges available allows you to print labels with

different widths and exciting colours.

Read this manual carefully before starting and keep the manual in a handy

place for future reference.

• Use only Brother TZ tapes with this machine. Do not use tapes that do not have

the mark.

• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry cloth.

• Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton swab) when

cleaning the print head.

• To avoid injuries, do not touch the edge of the cutter.

• To prevent damage or breakage of the glass, do not press hard on the LCD display.

• Do not put any foreign objects into or heavy objects on the machine.

• Do not leave any rubber or vinyl on the machine for an extended period of time,

otherwise the machine may be stained.

• Do not get the machine wet, such as by touching with wet hands or spilling beverages

on to the machine.

• Do not expose the machine to extremely high temperatures or high humidity. Never

leave it on the dashboard or in the back of your car, near heaters or other hot

appliances. Keep it out of both direct sunlight and rain.

• Avoid using the machine in extremely dusty places.

• Do not pull on the tape being fed from the P-touch, otherwise the tape cassette

may be damaged.

• Do not attempt to cut the tape while printing or feeding since this will damage the tape.

• Do not try to print labels using an empty tape cassette set in the P-touch. Doing so will

damage the print head.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the

machine for an extended period of time. (Note: When power is disconnected for more

than three minutes, all text shown in the display and any text files stored in the

memory will be lost. Language and unit settings will also be cleared.)

• Do not use old and new batteries together or mix alkaline batteries with other type

batteries, or set the positive and negative end in the wrong position. Otherwise the

batteries may have leakage or fracture.

• Use only the suggested AC adapter for this machine to prevent any damage or

failure.

INTRODUCTION

INTRODUCTIONINTRODUCTION

Declaration of Conformity

We BROTHER INDUSTRIES, LTD.

15-1, Naeshiro-cho, Mizuho-ku, Nagoya 487-8561, Japan

declare that the Labelling System PT-1830 conforms with the following normative

documents:

EMC: EN55022:1998/A1: 2000/A2: 2003 Class B

EN55024:1998/A1: 2001

EN61000-3-2: 2000

EN61000-3-3: 1995/A1: 2001

and follows the provisions of the Electromagnetic Compatibility Directive 89/336/EEC (as

amended by 91/263/EEC and 92/31/EEC). The optional AC adapter also conforms with

EN 60950 and follows the provisions of the Low Voltage Directive 73/23/EEC.

Issued by: BROTHER INDUSTRIES, LTD.

Personal & Home Company

Development & Production Dept.

Note: Marking is in compliance with EU Directive 2002/96/EC and EN50419.

This equipment is marked with the above recycling symbol. It means that at the end

of the life of the equipment you must dispose of it separately at an appropriate col-

lection point and not place it in the normal domestic unsorted waste stream. This will

benefit the environment for all. (European Union only)

GENERAL PR

GENERAL PRGENERAL PRECAUTIONS

ECAUTIONS

ECAUTIONSECAUTIONS

Tape Cassettes

Make sure that the power is turned off when replacing a tape cassette.

Open the tape compartment cover by lifting up both sides at the same time.

If a tape cassette is already installed, remove it by pulling it straight up.

Insert a tape cassette, making sure that it snaps into place.

• Make sure that the end of the tape feeds under the tape guides.

• If the ink ribbon is loose, use your finger to wind the toothed wheel in the

direction of the arrow on the cassette.

After you have installed the tape, feed the tape ( + ) once and

then push in the tape cutter lever to cut the tape.

Securely close the front cover, making sure that it snaps into place.

Power Supply

Make sure that the power is turned off when replacing batteries.

Turn the machine over and remove the battery compartment cover.

If batteries are already installed, remove them.

Insert six new AA-size alkaline batteries (LR6), making sure that their

poles point in the correct directions. Always replace all six batteries at the

same time using brand new ones.

Attach the battery compartment cover by inserting the three hooks at the

bottom into the slots on the machine, then pushing down firmly on the

cover until it snaps into place.

When using AC adapter (model G1)

Insert the plug on the adapter cord into

the adapter jack on the right side of the

machine.

Insert the plug into the nearest standard

electrical outlet.

For memory back up, when the AC adapter

is unplugged, please use AA-size alkaline

batteries (LR6).

Tape compartment

cover

End of tape

Tape guide

Toothed Wheel

Battery compartment

cover

Keyboard & Display

Initial Setting

Start your machine

Supply power by using six AA batteries or the AC adapter, and then press .

Set the language (Language option differ by distribution)

Choose a language with and press / .

Creating Labels

• The display (LCD) shows one row of 15 characters; however, the

text that you enter can be up to 80 characters in length.

• Use Cursor key while holding down Shift key to go to beginning/

end of the text.

• The machine automatically turns off if no key is pressed within 5

minutes.

• To cancel operations, press .

• To initialize the settings, turn off the machine and then while

holding down and , press to turn the machine back on.

Finally, release and .

<Note> The text and formats in the display and all text files stored

in the memory are erased. Also, the language and unit set-

tings will be cleared.

Size

Caps

Print key

Preview key

Character keys

Caps key

Shift key

Width

Style

Underline/Frame

Label Length

Cursor/Esc/

OK key

Memory keys

(Favourite Label

Memory)

Function key

Power key

Backspace key

Enter key

Shift key

Accent key

Space key

Cursor

Symbol key

Tape cutter lever

See the reverse side for steps of creating labels.

Troubleshooting

Error message

What to do when...

Specifications

Accessories (Supplies may differ by distribution.)

Contact Information

Contact may differ by country. See the Web site. (http://www.P-touch.com/)

Message Cause/Remedy

Battery Weak! The batteries are weak.

Check Battery! The installed batteries are about to run out.

Invalid! • There is no text above the cursor when you set Number-

ing.

• Invalid character is selected for Numbering.

• Invalid number is selected for Tab Length or Label Length.

No Text! • You try to print a text file when there is no data stored in

the memory.

• The Print key is pressed when no text is entered.

• You try to set Copies, Numbering or Mirror when no text is

entered.

Line Limit! • You try to enter a 3rd line by pressing Enter key.

• You try to print a 2 line text when 3.5 mm or 6 mm tape is

installed.

No Cassette! You try to print a label when there is no cassette installed.

Cutter Error! Tape Cutter lever is used in the middle of printing process.

Full! The maximum number of characters (80 characters) have

already been entered.

Text Too Long! The text length exceeds the selected label length or the

selected Auto Format setting length.

No Frame OK? Printing on 3.5 mm tape with invalid Frame setting ON.

(Select to print with no Frame, to cancel.)

Problem Solution

The display stays blank

after you have turned on

the machine.

• Check that the batteries are correctly inserted.

• If the batteries are weak, replace them.

• Check that the suggested adapter is correctly connected.

The machine does not

print.

• Check that the tape cassette has been inserted correctly.

• If the tape cassette is empty, replace it.

The printed characters

are not formed properly,

or the printed characters

are blurred.

• The batteries may be weak. Replace them.

The memory has

cleared on its own.

• The batteries may be weak. Replace them.

A blank horizontal line

appears through the

printed label.

• There may be some dust on the print head. Remove the

tape cassette and use a dry cotton swab to gently wipe the

print head with an up-and-down motion.

• The print head can be cleaned more easily if the optional

print head cleaning cassette (TZ-CL4) is used.

The machine has

"locked up" (i.e., nothing

happens when a key is

pressed, even though

the machine is on).

• Turn off the machine, and then while holding

down and , press to turn the machine back on.

Finally, release and .

Item Specification

Dimensions 173 mm (W) × 222 mm (D) × 62 mm (H)

Weight 590 g (without batteries and tape cassette)

Power supply

Six AA-size alkaline batteries (LR6) or AC adapter (model G1)

Tape cassette Brother TZ tape (width) :

3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm

Accessories Stock No.

Tape Cassettes See the attached TZ Tape Catalogue.

AC adapter model G1

PREPARATION OPERATION REFERENCE

[GETTING STARTED]

Switching Upper Case/Lower Case

Making Two Line Text

Move the cursor to where the second line starts and press .

Use either 9 mm, 12 mm, or 18 mm wide tape for two line texts.

Entering Symbols

• To go to the next group, press .

• To cancel operations, press .

Entering Accented Characters

> > />/

• To cancel operations, press .

• The order of accented characters depends on the language you selected in the LCD.

To Clear

Entries will be deleted backwards.

All text and settings will be cleared.

Group

Symbols

Group

Symbols

1 7

2 8

3 9

4 10

5 11

6 12

Accented Characters Accented Characters

A a

C c

D d

E e

G g

I i

K k

L l

N n

O o

R r

S s

T t

U u

Y y

Z z

Upper case ( ON) Lower case ( OFF)

Display Label image

Setting [Size]

> >[ ]Size [ ]Large

Automatically adjusts the text size according to the tape width.

Select MAX to print with maximum text size when using 18 mm (3/4") tape, all

texts are in upper case, the Style setting is [Normal], and the Underline/Frame

setting is [Off].

Setting [Width]

> >[ ]Width [ ]×2

Setting [Style] (Vertical)

> >[ ]Style [ ]Vertical

Setting [Underline/Frame]

> >[ ]Underline/Frame [ ]Underline

Frames will not be printed on 3.5mm tape.

Setting [Tab]

You can make aligned texts by setting tabs.

Example: To set a tab between "ABC" and "D"

The cursor should be positioned where you set a tab.

> > [ ]Tab

Setting [Tab Length]

(Auto / 0 - 100mm)

> >[ ]Tab Length

• You can also select the length by entering the length with number keys.

• To return to [Auto], press .

Setting [Label Length]

(Auto / 30 - 300mm)

> >[ ]Label Length

• You can also select the length by entering the length with number keys.

• To return to [Auto], press .

Setting [Auto Format]

You can choose label length from six formats to create labels for various ap-

plications.

> >[ ]Auto Format [VHS Spine]

Text Preview

You can preview the text before printing.

• The LCD shows the whole text and the label length (mm), then returns to the original

text.

• Only the text can be previewed, but not the font, style, size, underline/frame or any

additional features.

Printing

• To cut off the label, push in the tape cutter lever on the upper-left corner of the

machine.

• To prevent damage to the tape, do not try to cut while the message "Print" or "Feed"

is displayed.

Feeding (Tape Feed)

• Please feed the tape after you install a new tape cassette, or before you cut a label

after printing with [Chain Print] margin setting.

Setting [Margin] (Tape Margin)

> >[Margin] [Full]

[Full]/[Half]/[Narrow] is for leaving equal margins on both sides of the text.

NOTE: Cut along the printed dots (:) with scissors so the text is centered in the label.

[Chain Print] is for printing more than 1 copy of a label with minimum margin

<e.g. 1>. You can also create a label containing texts in various styles; print

a text in one style, and before feeding, enter the second text in another style

<e.g. 2>.

FEED THE TAPE BEFORE USING THE CUTTER (see Feeding/Printing).

Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the

tape since this may damage the tape cassette.

Using [Print Option]

[Copies]

You can print up to 9 copies of each label.

> > >[ ]Print Option [ ]Copies

You can also select the number of copies by entering with number keys.

[Numbering]

You can print many copies of the same text while increasing a selected

number by 1 after each label is printed.

Example: To print copies of a label containing a serial number (0123, 0124 and 0125)

> > [ ]Print Option >

[ ]Numbering >

Select the highest number you wish to be printed when setting the number.

[Mirror]

[

Print Option

]

[

Mirror

]

[Mirror Print?]

Use a clear tape in [Mirror] printing, so the labels can be read correctly from

the opposite side when attached on glass, windows or other transparent sur-

faces.

Peel the printed label from the backing and apply the label.

Favourite Label Memory

You can save frequently used texts in the memory and print directly or open

to edit if needed. You can save one text into each key ( ~ ) (Maximum:

5 texts).

To Save:

> >

To Print:

To Open:

> >

When the saved text contains more than 8 characters, use to scroll the

text.

Function Shortcuts

In addition to the basic steps to search for a function, PT-1830 provides you

with function shortcuts so you can easily jump to a frequently used function

just by pressing and the shortcut key shown in the table below. To con-

firm, press .

[Large] [Medium] [Small] [MAX]

[Normal] [× ×2] [ 1/2]

[Normal] [Bold] [Outline]

[Shadow] [Italic] [Italic Bold]

[Italic Outl](Italic Outline)

[Italic Shadow] [Vertical]

[Off] [Underline] [Round] [Candy] [Callout]

[Banner] [Wooden] [Vine] [Hand] [Flower]

Application Length LengthApplication

VHS Spine 140 mm CD Case Spine 113 mm

MiniDV Spine 42 mm File Tab 82 mm

Audio Tape 89 mm Divider Tab 42 mm

( + )

Display Label image

ABC D

Tab

( + )

25mm

12mm 12mm 4mm4mm

25mm

ABC ABC: ABC:

Full Half Narrow

ABC ABC ABC ABC ABC

DEF

<e.g. 1> <e.g. 2>

(feed & cut) (feed & cut)

Chain Print

( + )

Key Function Key Function

[Size] [Tab Length]

[Width] [Label Length]

[Style] [Auto Format]

[Underline/Frame] [Margin]

[Tab] [Print Option]

( + )

[CREATING LABELS]

MAKING TEXT

DESIGNING LABELS

PRINTING LABELS COMPLETED LABELS

USEFUL FUNCTIONS

Product specificaties

Merk:	Brother
Categorie:	Labelprinter
Model:	P-touch PT-1830
Kleur van het product:	Goud
Gewicht:	590 g
Breedte:	173 mm
Diepte:	222 mm
Hoogte:	62 mm
Beeldscherm:	LCD
Ondersteund aantal accu's/batterijen:	6
Maximale resolutie:	180 x 180 DPI
Printkleuren:	Zwart
Printtechnologie:	Direct thermisch
Toetsenbordindeling:	QWERTY
Afmetingen (B x D x H):	173 x 222 x 62 mm
Printsnelheid (metrisch):	10 mm/sec
Type batterij:	AA
Geheugen capaciteit:	347 tekens
Soort tape:	TZ
Aantal letterstijlen:	10
Verticaal printen:	Ja
Afsnijden:	Handmatig
Label type:	3.5, 6, 9, 12, 18mm