Brabantia BBEK1113B Handleiding

Brabantia Keukenmachine BBEK1113B

Lees hieronder de 📖 handleiding in het Nederlandse voor Brabantia BBEK1113B (12 pagina's) in de categorie Keukenmachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

IMPORTANT SAFEGUARDS

Please read this instruction manual carefully before using and keep instructions in a safe place for

future reference.

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read and save all instructions.

2. To protect against risk of electrical shock, do not immerse base, motor, cord or plug in water

or other liquid.

3. Close supervision is necessary when any appliance is used by or near children.

4. This appliance should not be used by children.

5. This appliance is not intended for use by person (including children) with reduced sensory

or mental capabilities, or lack of experience and knowledge, unless given supervision or

instruction concerning use of the appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the appliance.

6. Unplug the cord from the power outlet when not in use, before putting on or taking off parts

and before cleaning.

7. Avoid contact with moving parts.

8. Do not operate any appliance with a damaged cord or plug; after the appliance malfunctions

or is dropped; or the appliance is damaged in any manner. Call our toll-free customer service

number for information, examination and repair, electrical or mechanical adjustment. Never

attempt to service this appliance yourself.

9. The use of attachments not recommended or sold by the appliance manufacturer, may

cause fire, electric shock or injury and is strictly prohibited.

10. Do not use your food processor if any part is broken.

11. Do not let the power cord hang over the edge of a table or counter, or touch a hot surface.

12. Keep hands and utensils away from moving blades and discs while processing food so as to

avoid severe personal injury and/or damage to the food processor. A rubber scraper may be

used, but ONLY when the food processor is not running.

13. The blades and discs are sharp! Handle carefully!

14. Never feed food into the food chute by hand. Always use the food pusher.

15. To reduce the risk of injury, never place the cutting blade or disc on the base without first

putting the bowl properly into place.

16. Ensure that the lid is securely locked into place before operating the appliance.

17. Never attempt to override the lid interlocking mechanism.

18. Make sure that a blade or a disc has come to a complete halt before removing the lid.

19. Caution: To reduce the risk of injury, be sure to insert or remove blades and discs using the

hubs provided for this purpose. Use caution when removing blades and discs from the bowl,

when emptying the bowl and when cleaning.

20. Ensure that the switch is turned to the OFF (O) position after each use. Always use the

pusher to clear the food chute. When this method is not possible, turn the motor off and

disassemble the unit to remove the remaining food.

21. This appliance is not intended for commercial, professional or industrial use. It is designed

and built exclusively for household use only.

22. Do not use this appliance outdoors.

23. Do not use appliance for other than its intended use.

24. Never use the appliance for a longer period or with a larger amount of ingredients than

recommended by the appliance manufacturer.

25. The maximum rating of this unit is based on use of the chopping/mixing blade. The slicing/

shredding disc may draw significantly less power.

26. Do not place on or near a hot gas or electric burner or in a heated oven.

27. Store this appliance out of the reach of children.

PARTS AND FEATURES

ONDERDELEN EN FUNCTIES

ACCESSOIRES ET CARACTÉRISTIQUES

PARTES Y CARACTERÍSTICAS

PARTI E FUNZIONI

TEILE UND FUNKTIONEN

13. Screening plate

14. Top cover

15. Blender cup cover

16. Blender cup

17. Sealing ring

18. Blender base

19. Scraper

20. Mincing cup cover

21. Mincing cup

22. Mincing base

23. Grinder cup

24. Grinder base

1. Pusher

2. Lid

3. Maxi-blend canopy

4. Moving axle sleeve

5. Bowl

6. Motor shaft

7. Rotor

8. Main unit

9. Dough tool

10. Knife blade

11. Thin slicing/fine shredding disc

12. Rotating head

13. Screeningplaat

14. Bovenklep

15. Deksel blenderkom

16. Blenderkom

17. Afdichtring

18. Blenderbasis

19. Spatel

20. Deksel hakkom

21. Hakkom

22. Hakbasis

23. Maalkom

24. Maalbasis

1. Stamper

2. Deksel

3. Maxi-mixdeksel

4. Aandrijving

5. Kom

6. Motor-as

7. Rotor

8. Hoofdeenheid

9. Kneedhaak

10. Sikkelmes

11. Fijnsnijder/fijnsnipperaar schijf

12. Roterende kop

13. Tamis

14. Couvercle supérieur

15. Couvercle de bol du mixeur

16. Bol du mixeur

17. Anneau d’étanchéité

18. Base du mixeur

19. Raclette

20. Couvercle du bol éminceur

21. Bol éminceur

22. Base du bol éminceur

23. Bol broyeur

24. Base du bol broyeur

1. Poussoir

2. Couvercle

3. Disque super mélangeur

4. Manchon d’arbre mobile

5. Bol

6. Arbre moteur

7. Rotor

8. Bloc moteur

9. Dispositif de pétrissage

10. Lame

11. Disque éminceur fin/déchiqueteur fin

12. Tête rotative

13. Filtro

14. Tapa superior

15. Tapa del vaso de la licuadora

16. Vaso de la licuadora

17. Anillo de sellado

18. Base de la licuadora

19. Espátula

20. Tapa del vaso para picado

21. Vaso para picado

22. Base para picado

23. Vaso para molido

24. Base para molido

1. Empujador de alimentos

2. Tapa

3. Cubierta de mezclado máximo

4. Manga del eje

5. Vaso

6. Eje del motor

7. Rotor

8. Unidad principal

9. Herramienta para amasar

10. Cuchilla

11. Disco para rebanadas delgadas y rallado fino

12. Cabezal giratorio

13. Passino

14. Tappo del coperchio

15. Coperchio vaschetta del frullatore

16. Vaschetta del frullatore

17. Guarnizione ad anello

18. Base del frullatore

19. Raschietto

20. Coperchio vaschetta del tritatutto

21. Vaschetta del tritatutto

22. Base del tritatutto

23. Vaschetta del macinatutto

24. Base del macinatutto

1. Pressino

2. Coperchio

3. Componente di impastatura

4. Manicotto asse mobile

5. Ciotola

6. Albero motore

7. Rotore

8. Unità principale

9. Strumento impastatore

10. Lama di taglio

11. Disco per affettare/sminuzzare finemente

12. Testa rotante

13. Siebschale

14. Deckel

15. Mixbecherdeckel

16. Mixbecher

17. Dichtungsring

18. Klingenaufsatz

19. Spatel

20. Hackbecherdeckel

21. Hackbecher

22. Hackwerk

23. Mahlbecher

24. Mahlwerk

1. Stopfer

2. Deckel

3. Große Mixscheibe

4. Abnehmbarer Wellenaufsatz

5. Schüssel

6. Motorwelle

7. Rotor

8. Motoreinheit

9. Kneteinsatz

10. Messerklinge

11. Schneide-/Raspelscheibe für dünnes

Scheiden/feines Raspeln

12. Drehkegel

SAVE THESE INSTRUCTIONS!

Consumer Safety Information

This appliance is intended for household use only.

WARNING: Shock Hazard! This appliance has a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way.

If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician. Do not attempt to modify the plug in any way. To avoid an electrical circuit overload do

not use another high wattage appliance on the same circuit as your food processor. The length of

the cord provided with this appliance was selected to reduce the hazards of becoming entangled

in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may

5. Cut a citrus fruit in half and press the cut end of one fruit half onto the cone. Turn on

the machine and choose the speed. Choose a low speed rotation and increase to a

higher rotation if necessary. Increase speed gradually to avoid juice being ejected due to

excessively high speed rotation.

The cone will scrape the pulp out and squeeze the juice from the fruit.

6. To maximize the quantity of juice extracted from a fruit, press the fruit onto the cone several

times.

Rotating

Head

Screening

Plate

Motor

Shaft

Processing Using The Mixing Cup

1. Make sure that the Control Switch is turned to OFF (O) and that the unit is unplugged.

2. Put the sealing ring into the cutter seat slot and screw and fasten the mixing cup into the

cutter seat (clockwise to fasten and counter-clockwise to loosen). Put the mixing cup cover

and the feed cover on.

3. Screw the cutter seat clockwise into the main machine.

Note: When disassembling, (counterclockwise) do not hold and unscrew the cup only as then the

cup will unscrew from the cutter seat and the food in the cup will leak out. Hold the cup and cutter

seat together to disassemble.

MIXING FRUIT OR VEGETABLES

Peel and shell fruit or vegetables and cut into cut into small blocks or sections. Put 600g into the

mixer at a time, pour in the appropriate amount of cool boiled water and mix for 1min on high

speed.

Top Cover

Mixing Cup

Mixing Cutter

Seat

Processing Using The Mincing Cup

1. Screw the mincing cup into the cutter seat (clockwise).

2. To process meat, remove all tendons, bones and skin. Wash meat and cut into small

2 centimeter squares. Put 200g into the mincing cup at a time. Put the cup cover on the

mincing cup and mount it on the main machine according to the position shown in the

diagram. Turn clockwise and screw the mincing cup tightly into position. Turn the mincing

button switch on.

3. While mincing, add some edible oil or flavoring to the meat to produce better results.

Note: If the rotating speed slows down abruptly due to too much meat being processed at a time or

because tendons become entangled in the blade, turn the machine off and remove excess meat or

tendons.

Mincing Cup

Processing Using Grinding Cup

1. The grinding cup may be used to grind dried food into powder.

2. To grind food put 150g into the grinding cup, cover with the grinding cutter seat, and fasten

tight in a clockwise direction. Mount on the main machine according to the position shown

in the diagram. Turn clockwise and screw the grinding cup tightly into position. Turn the

grinding button switch on.

3. When grinding sesame, walnut and other oily food, add a spoon of granulated sugar into the

grinding cup for better results.

Note: If the cutter does not make contact with the food, switch off the power supply, mix the food

softly and then turn on to grind again.

Grinding Cup

TROUBLESHOOTING GUIDE

Before calling the Customer Service Number, carefully check the list below for a possible solution.

PROBLEM CAUSE/SOLUTION

Unit does not operate on any speed

or Pulse.

• Is the unit plugged in? Does the outlet work?

• Are the bowl, bowl lid and food chute lid all locked

into place? See page 4 “How to Assemble.”

Food is not chopped, sliced or

shredded uniformly.

• Packing too much food in the food chute, or

pushing too hard on the food pusher may cause the

processed food to be irregularly sliced or shredded.

Unit stops and will not switch on

again.

• Are the bowl, bowl lid and food chute lid all locked

into place? They may have moved slightly during

processing. See page 4 “How to Assemble.”

• Is the power outlet still working? Check by plugging

in a working lamp or other appliance. You may have

overloaded the circuit and blown a fuse or tripped

the circuit breaker.

• Turn the unit OFF, allow it to stand for 3 to 4 minutes

and then turn back ON.

If none of these suggestions correct the problem, DO

NOT attempt to repair the unit. Call the customer service

number to get the name of your nearest Authorized

Service Centre.

Unit emits a burning smell There may be some residue left on the motor from •

the manufacturing process, causing a slight odour

during initial use. This will go away. If a strong

odour or any visible smoke appears, unplug the unit

IMMEDIATELY and call your nearest Authorized

Service Centre.

Motor seems weak Are you using the recommended speed for the item •

you are processing?

• Are you using the recommended food size and

quantity to be processed?

DO NOT OVERLOAD YOUR PROCESSOR

CLEANING, STORAGE AND MAIMTENANCE

1. Wash bowl, lids, blade, discs, and removable drive sleeve and food pusher in hot, soapy water.

Rinse and dry thoroughly. See “How to remove food chute lid for cleaning”. To clean food

thoroughly from the bowl, lid and food chute immerse them in hot soapy water.

NOTE: Do not store the unit with lid in locked position as this may put a strain on the interlock tab.

2. Wipe base, control panel and cord with a damp cloth or sponge. To remove stubborn stains,

use a mild non-abrasive cleanser.

3. To store, place the bowl on the base. Then place the chopping/mixing blade on the motor

shaft and the slicer/shredder disc on the chopping/mixing blade. The removable drive sleeve

may be stored in the bowl. Place the lid on the bowl but do not lock.

4. Place a drop of vegetable oil on each screw in the food chute once a month.

HOW TO RELEASE THE SUCTION CUP FEET AFTER USE

The suction cup feet on the bottom of your Food Processor are designed to keep the unit stationary

during use.

To maximize the life of the suction cup feet: Lift the fully assembled Food Processor off the counter

by placing your hands under the unit (as illustrated) and lifting up one side.

be used. The electrical rating of the extension cord must be equal to or greater than the rating of

the appliance. Care must be taken to arrange the extension cord so that it will not drape over the

counter top or table top where it may be pulled by children, or accidentally tripped over.

USING YOUR FOOD PROCESSOR

How To Lock The Bowl

Align the base and the bowl as illustrated. Turn the bowl clockwise until it locks into place. The bowl

will lock onto the base in 3 different positions for user convenience.

NOTE: The food processor will not work unless the bowl is locked into position.

How To Assemble And Lock The Lid

Align the lid as illustrated, by placing a thumb on the lid tab and twisting the lid clockwise. Four

visual alignment markers are provided (see illustration), one on the bowl, one on the handle and

two on the bowl lid.

NOTE: The food processor will not work unless the lid is locked into position.

How To Operate The Controls

The control dial is conveniently located on the front of the base.

Rotate the knob clockwise to increase speed. Rotate counter-clockwise to reduce speed. For

instant on and off control, use the PULSE (P) button by rotating the knob counter-clockwise. To turn

off the machine, rotate the switch to OFF (O).

Processing Tips And Techniques

This food processor is excellent for chopping, mixing, slicing and shredding most foods. However,

to maintain peak performance, do not use your food processor for: grinding grain, coffee beans or

spices; slicing frozen meat or crushing ice.

Operating time will depend on the quantity of food being processed. Most foods can be sliced,

chopped or shredded in seconds.

NOTE: If the unit is operated for 30 seconds continuously, let the processor rest for about 3 minutes

before continuing.

Processing Using Chopping/Mixing Blade

For a more uniform consistency, start with pieces of food that are similar in size. Carrots, for

example, should all be cut in 1-inch (2.5 cm) chunks. Do not process 4-inch (10cm) pieces with

1/2- inch (1 cm) pieces.

Motor Shaft

Slicer

Shredder

Disc

Removable

Drive Sleeve

The Chopping/Mixing Blade can be used to chop coarsely, mince finely, mix or puree food to a

smooth consistency.

1. Make sure that the Control Switch is turned to the OFF (O) position and that the unit is

unplugged

2. Lock the bowl onto the base (See “How to Lock the Bowl” )

3. Place the Chopping/Mixing Blade onto the motor shaft of the food processor in the center of

the bowl. Turn slowly until the blade drops into place.

Caution: Handle carefully; the blade is sharp!

4. Lock the lid onto the bowl. Insert the food pusher into the food chute.

Do not puree or mash starchy vegetables like potatoes. They will be over-processed in a

second and turn gummy.

5. Plug the unit into the power outlet and process the food. The processing speed and time

will determine the finished consistency of the food. Use the Pulse button to avoid over

processing.

6. When finished processing, select OFF (O) or release the PULSE button.

Caution: Wait until the blades have stopped rotating completely before removing the

lid.

7. Unplug the unit.

Chopping/Mixing Blade

Motor Shaft

Processing Using Slicer/Shredder

* To slice or shred cheese, select firm cheese like Cheddar, Monterey Jack or Swiss. Tip:

Place cheese in the freezer for 30 minutes before processing.

* The Reversible Slicer/Shredder Disc has a slicing blade on one side and shredding teeth on

the other. Place on the motor shaft with the desired cutting edge facing upwards.

1. Make sure that the Control Switch is turned to OFF (O) and that the unit is unplugged

2. Lock the bowl onto the base (See “How to Lock the Bowl”).

3. Put the Slicer/Shredder Disc on the Removable Drive Sleeve with the desired side facing up

for either slicing or shredding. Lock the lid onto the bowl (See “How to Assemble and Lock

the Lid”).

4. Insert the food pusher into the chute. Always use the food pusher to feed food into the chute.

NEVER PUSH FOOD THROUGH THE CHUTE WITH YOUR HANDS.

5. Plug in the unit.

6. Select the speed. While pressing on the food pusher, rotate the switch for optimum slicing

and shredding performance or press PULSE to process the food.

NOTE: The food chute lid is designed to pivot towards the right when processing food in order to fill

the entire food chute.

7. When the food chute is empty, select OFF (O) or release from PULSE position.

Caution: Wait until the blade has stopped rotating completely before removing the lid. Unplug

the unit.

Slicer

Shredder

Disc

Motor Shaft

Processing Citrus Juice

1. Make sure that the Control Switch is turned to OFF (O) and that the unit is unplugged.

2. Lock the bowl onto the base.(See “How to Lock the Bowl”)

3. Put the Citrus Juicer Disc on the Removable Drive Sleeve (clockwise for fastening).

4. Fit the appropriate cone onto the drive shaft. (The large cone is suitable for juicing larger

citrus fruit, such as grapefruit, oranges etc. The small cone is suitable for juicing small citrus

fruit, such as lemons, limes etc.)

Product specificaties

Merk:	Brabantia
Categorie:	Keukenmachine
Model:	BBEK1113B
Soort bediening:	Draaiknop
Kleur van het product:	Roestvrijstaal
Ingebouwd display:	Nee
Gewicht:	5900 g
Breedte:	200 mm
Diepte:	200 mm
Hoogte:	400 mm
Makkelijk schoon te maken:	Ja
Vermogen:	1000 W
Inhoud bak/kan:	1.2 l
Vaatwasserbestendige onderdelen:	Ja
IJs-crusher:	Ja
Anti-slip voetjes:	Ja
Pulse function:	Ja
Materiaal mes:	Roestvrijstaal
Rotatiesnelheid ( max):	17000 RPM
Rotatiesnelheid ( min):	13000 RPM
Kneedfunctie:	Ja
Citruspers:	Ja
Pastamaker:	Nee
Mixer functies:	Chop, Cutting, Grind
Meegeleverde kom:	Ja
Spatel:	Ja
Verwisselbare bladen:	Ja