Boston Acoustics SoundWare black Handleiding

Boston Acoustics Speaker SoundWare black

Lees hieronder de 📖 handleiding in het Nederlandse voor Boston Acoustics SoundWare black (20 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

SoundWare

High Performance Indoor / Outdoor Speaker

For great sound anywhere

Español

Gran sonido en cualquier lugar

Altavoz para interior/exterior

Francais

Un son sublime à tout endroit

Haut-parleur d’intérieur/extérieur

Italiano

Suono eccellente ovunque

Impianto di altoparlanti per

interni ed esterni

Svensk

Perfekt ljud överallt

Inom- och utomhushögtalare

Deutsch

Überall ein Riesensound

Innen-/Außenlautsprecher

Description

The Boston Acoustics® SoundWare is truly a go everywhere, do everything speaker. All of its parts

are weather resistant so they’re at home indoors and out, in situations from outdoor entertainment

to home theater. Compact size and a  exible mounting system give you many options for installation

locations. You can just set them on a shelf or use the supplied brackets and mount them in a corner

or on a  at wall. The pivoting mounts let you tilt and swivel the speakers to suit the installation. If one

of the available colors doesn’t work in your décor, then SoundWare can be painted in a matching or

complementary color. SoundWare – Great Sound Anywhere.

Speci cations

Frequency Response 90Hz-20kHz (±3dB)

Recommended Amp Power 15 – 100 watts

Nominal Impedance 8 ohms

Sensitivity 87dB

Woofer 41⁄ ” (114mm) Driver2

Tweeter 3⁄ ” (20mm) dome4

Crossover Frequency 3.5kHz

Net Weight 4.9 lbs (2.22kg)

Dimensions (H x W x D) 61⁄ x 661⁄ x 661⁄ ” (157 x 157 x 167mm)2

Placement Options

The SoundWare speaker can be wall mounted using the supplied hardware or simply placed on a

shelf. If it is being placed on a shelf you can simply attach the adhesive-backed rubber feet and

connect the speaker wires.

Attaching the Pivoting Ball Mount

If you plan to use the mounting brackets you must attach

the pivoting ball mount to the speaker. Use the four sup-

plied  at-head machine screws as shown in the illustration.

Mounting the Wall Bracket

Brackets for mounting the speakers on a  at wall or in a

corner are supplied. One thing that is not supplied is hard-

ware to attach the bracket to the wall. Why? Because there

are so many di erent kinds of surfaces on which the speakers could

be mounted. It could be basic drywall which may or may not have a

stud behind it. It could be a wood panel or even a concrete foundation

wall. There is no one type of fastener that we could supply that would

work in all the possible situations. So taking into account the surface the speaker is being mounted

on, acquire the appropriate type of fasteners. You’ll need four for each speaker. If you’re not sure what

type of fastener to use, take the mounting bracket to a friendly hardware store, tell them about the

wall you’re mounting the speaker on, and ask them to recommend an appropriate fastener. Keep in

mind the weight of the speaker.

The SoundWare speakers pivot on their mounts.

Vertically they can go from facing straight out to being

tilted down 40 degrees. When the  at wall mounting

bracket is used they can pivot side to side 20 degrees.

(Note: Corner mounting will not allow the speaker to

pivot side-to-side.) Loosen the pivot set screw on the

front of the pivoting ball mount, pivot the speaker into

position and retighten the screw.

Speaker Wires

For short runs of less then 20 feet or so you can use 16 gauge wire. But typically you should use

heavier 14 gauge wire. That is good enough for runs up to 50 feet or so. For runs of more than 50 feet

use 12 gauge wire.

Speaker Connection Polarity

All the speakers in a system must be hooked up with the same polarity or “in phase.” The terminals on

the SoundWare speakers are color coded to identify the “+” (red) and “–” (black) connections. All wire

is marked in some way so you can tell one conductor from the other. The marking may be a ridge

molded into the insulation of one conductor, or it may have a stripe on the insulation, or it may be

color coded. Use the marking on the speaker wires to be sure that the “+” terminal of the ampli er is

connected to the “+” terminal of the speaker, and “–” is connected to “–”, at every connection.

Connecting the Speakers

Separate the two conductors of the wire. Remove

about 3/8” of insulation from the end of the wire. Push

down on the top of the terminal to open the hole for

the wire. Insert the wire and release the terminal to

secure it. Be sure there are no loose strands of wire.

Note: there is a channel in the back of the speaker for

the wire, to keep it neat and out of sight.

«ÛÌÃÊ

`ÜÊ{äc

«ÛÌÃÊÓäc

i>VÊÜ>ÞÊ

*ÛÌÊ-iÌ

-VÀiÜ

Mounting the Speakers

Once you have the bracket mounted and the speaker

connected the rest is easy.

1 Put the rounded end of the speaker mount in the

bracket and slide it down to lock it in place.

2 Optional – Insert and tighten the screw to secure

everything.

Product specificaties

Merk:	Boston Acoustics
Categorie:	Speaker
Model:	SoundWare black
Kleur van het product:	Zwart
Gewicht:	- g
Breedte:	157 mm
Diepte:	167 mm
Hoogte:	157 mm
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	100 W
Aanbevolen gebruik:	Universeel
Impedantie:	8 Ohm
Geschikt voor buitengebruik:	Ja
Audio-uitgangskanalen:	2.0 kanalen
Speaker plaatsing:	Ceiling-mountable, In-wall/in-ceiling, Tabletop/bookshelf, Wall-mountable
Aantal drivers:	2
Woofer:	Ja
Frequentiebereik:	90 - 20000 Hz
Gevoeligheid:	87 dB
Luidspreker soort:	2-weg
Diameter woofer:	114 mm
Aantal woofer drivers:	1
Diameter hogetonenluidspreker:	20 mm
Aantal tweeter drivers:	1
Tweeter:	Ja
Crossover frequentie:	3500 Hz
AirPlay:	Nee
Banana connector:	2
Multi-Room Streaming (MRS)-ondersteuning:	Ja