Bosch B810 Handleiding

Bosch Niet gecategoriseerd B810

Lees hieronder de 📖 handleiding in het Nederlandse voor Bosch B810 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Intrusion Alarm Systems | B810 Wireless SDI2 bus interface

B810 Wireless SDI2 bus interface

www.boschsecurity.com

uDual internal antennas provide spatial and polar RF

signal reception for high reliability

uCover and wall tamper protection

uMultiple device enrollment options as well as RF

diagnostics ensure efficient and effective installation

uSupports supervision of wireless points (504),

keyfobs (1000), and repeaters (8)

uExternal status LEDs

RADION wireless from Bosch provides the range,

scalability and exceptional battery life required to

ensure reliable performance and superior quality.

Advanced diagnostics and multiple device enrollment

options make installation and maintenance simple and

cost effective. With a complete line of peripherals,

RADION provides the flexibility for virtually any

application requirement.

System overview

The B810 is a wireless receiver that connects RADION

wireless peripherals such as the motion and specialty

detectors, keyfobs, panic buttons, door window

contacts, repeaters, and more, to supported Bosch

control panels using the SDI2 Bus connection.

The receiver supports RF communication at 433.42

MHz This frequency features improved penetration,

reflection, and refraction of signal for superior range,

and reliability. The receiver also features dual

antennas to achieve spatial and polar diversity to

further improve RF communication reliability. Enclosed

within the receiver housing for higher security, the

receiver is equipped with tamper protection, and

detects and reports radio frequency interferences. The

receiver supports supervision of wireless points (504),

key fobs (1000), and repeaters (8).

The receiver can be easily accessed and configured for

a compatible control panel using the address switch

on the back of the receiver housing. The receiver

address switch provides a single-digit setting for the

receiver’s address, allowing for ease of installation.

Functions

The receiver uses the RADION wireless protocol which

supports:

• SDI2 bus communication

• Tamper input processing

• RF interference (jamming) detection and reporting

• Signal strength and margin reporting

• Enroll Device Database management

Address switch addressing

Use the address switch to easily assign a bus address

or setup during installation.

Easy installation

The sliding self-locking enclosure has an integrated

bubble level and a custom gap-free, lift gate style

terminal block to make installation easier, faster, and

more reliable.

LED display

The LED provides status and troubleshooting

information about the receiver and its connection.

RF interference (jamming) detection and reporting

The receiver detects and reports interference jamming

when the ambient noise level is above jamming

thresholds for a continuous period of 20 seconds.

Communications

RF packet information is received through the use of

two spatial and polar diversity antennas. The receiver

then transmits a 4-bit sequence of information back to

the control panel for status changes.

Wall and cover tamper switch

The receiver transmits a tamper signal when someone

removes the device from it’s base, or pulls it away

from the wall.

Certifications and approvals

Region Regulatory compliance/quality marks

Australia RCM [B810]

USA ANSI-

SIA

CP-01-2010-Control Panel Standard -

Features for False Alarm Reduction

Europe CE EMC, LVD, R&TTE, RoHS [B810]

USA UL [B810, RFRP-A]

UL UL 1023 - Household Burglar Alarm Sys-

tem Units

UL UL 1076 - Proprietary Burglar Alarm

Units and Systems

UL UL 1610 - Central Station Burglar Alarm

Units

UL UL 365 - Police Station Connected Bur-

glar Alarm Units

UL UL 609 - Standard for Local Burglar

Alarm Units and Systems

UL UL 636 - Holdup Alarm Units and Sys-

tems

UL UL 985 - Household Fire Warning Sys-

tem Units (6th edition)

CSFM California State Fire Marshal

FCC Part 15 Class B

Installation/configuration notes

Mounting considerations

You can mount the wireless receiver in residential,

commercial or industrial locations in which a

compatible control panel is already installed. The

installation of the wireless receiver should be at a

distance no greater than 243 m (800 ft) from the

control panel.

Wiring considerations

The wireless receiver connects to a control panel using

the SDI2 connections (PWR, A, B, COM). Use

appropriate gauge wires from the receiver to the

control panel when connecting the wiring to the

terminal block of the receiver.

Compatibility

B9512G/B8512G

B6512/B5512/B4512/B3512

GV4 Series (D9412GV4, D7412GV4 v2.xx or higher)

control panels

RFDL-11-A/RFDL-11 motion detector

RFDW-SM-A/RFDW-SM standard door/window contact

RFDW-RM-A/RRDW-RM recessed door/window contact

RFRP-A/RFRP repeater

RFPR-12-A/RFPR-12 motion detector

RFPR-C12-A/RFPR-C12 motion detector (curtain)

RFUN-A/RFUN universal transmitter

RFKF-FB-A /RFKF-FBS-A/RFKF-FB/RFKF-FBS 4-button

keyfob

RFKF-TB-A /RFKF-TBS-A/RFKF-TB/RFKF-TBS 2-button

keyfob

RFPB-TB-A/RFPB-TB 2-button panic

RFPB-SB-A/RFPB-SB single button panic

RFGB-A/RFGB glass break

RFSM-A/RFSM smoke detector

Parts included

Quantity Component

1 Wireless receiver

1 Hardware pack

1 Installation guide

Technical specifications

Properties

Dimensions 139.70 mm x 209.60 mm x 31.80 mm

(5.50 in x 8.25 in x 1.25 in)

Wiring distance 243 m (800 ft)

Wiring gauge 0.65 mm (22 AWG) to 2.0 mm (18 AWG)

Tamper detection Transmits a tamper switch signal when

the unit is removed from its base, or the

mounting surface.

Power

Power/voltage 10-14 VDC, 12 VDC nominal

Maximum current draw 70 mA

Frequency 433.42 MHz

2 | B810 Wireless SDI2 bus interface

Environmental Considerations

Operating Environment 0 C to +49 C (+32 F to +120 F )ﾟﾟﾟﾟ

Relative humidity Up to 93% non-condensing

Use Intended for indoor use.

Ordering information

B810 Wireless SDI2 bus interface

Receives RF signals from RADION transmitters,

repeaters, and glassbreaks. Operates at 433.42 MHz.

For use with compatible SDI2 bus control panels.

Order number B810

3 | B810 Wireless SDI2 bus interface

Represented by:

Europe, Middle East, Africa: Germany: North America: Asia-Pacific:

Bosch Security Systems B.V.

P.O. Box 80002

5600 JB Eindhoven, The Netherlands

Phone: + 31 40 2577 284

emea.securitysystems@bosch.com

emea.boschsecurity.com

Bosch Sicherheitssysteme GmbH

Robert-Bosch-Ring 5

85630 Grasbrunn

Germany

www.boschsecurity.com

Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, New York, 14450, USA

Phone: +1 800 289 0096

Fax: +1 585 223 9180

onlinehelp@us.bosch.com

www.boschsecurity.us

Robert Bosch (SEA) Pte Ltd, Security Systems

11 Bishan Street 21

Singapore 573943

Phone: +65 6571 2808

Fax: +65 6571 2699

apr.securitysystems@bosch.com

www.boschsecurity.asia

7242869131 | en, V26, 29. Jun 2020

Product specificaties

Merk:	Bosch
Categorie:	Niet gecategoriseerd
Model:	B810
Kleur van het product:	Wit
Breedte:	139.7 mm
Diepte:	209.6 mm
Hoogte:	31.8 mm
Temperatuur, in bedrijf:	0 - 49 °C
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	12 V
Bedrijfstemperatuur (T-T):	0 - 49 °C