Bogen SAX1R Handleiding

Bogen Niet gecategoriseerd SAX1R

Lees hieronder de 📖 handleiding in het Nederlandse voor Bogen SAX1R (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

SAX1R

Stereo Aux Input

Module

Features

• Gain/Trim control

• Bass and treble

• Audio Gating with threshold and duration adjustments

• Variable signal ducking when muted or gated

• Fade back from mute level

• 4 levels of available priority

• Can be muted from higher priority modules

• Can mute lower priority modules

• Stereo signal or mono summed signal operation

Block Diagram

50 Spring Street, Ramsey, NJ 07446 U.S.A.

201-934-8500 • Fax: 201-934-9832

www.bogen.com

54-2054-01C 0906

Specifications subject to change without notice.

LIMITED WARRANTY; EXCLUSION OF CERTAIN DAMAGES

The Bogen SAX1R Module is warranted to be free from defects in material or workmanship for three

(3) years from the date of sale to the original purchaser. Any part of the product covered by this warranty

that, with normal installation and use, becomes defective will be repaired or replaced by Bogen, at our

option, provided the product is shipped insured and prepaid to: Bogen Factory Service Department,

50 Spring Street, Ramsey, NJ 07446, USA. The product will be returned to you freight prepaid. This

warranty does not extend to any of our products that have been subjected to abuse, misuse, improp-

er storage, neglect, accident, improper installation or have been modified or repaired or altered in any

manner whatsoever, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND

THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WAR-

RANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED

AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen’s liability arising out of

the manufacture, sale or supplying of products or their use or disposition, whether based upon war-

ranty, contract, tort or otherwise, shall be limited to the price of the product. In no event shall Bogen

be liable for special, incidental or consequential damages (including, but not limited to, loss of profits,

loss of data or loss of use damages) arising out of the manufacture, sale or supplying of products,

even if Bogen has been advised of the possibility of such damages or losses. Some States do not

allow the exclusion or limitation of incidental or consequential damages, so the above limitation or

exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have

other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department --

same address as above or call 201-934-8500. The parts and labor involved in these repairs are war-

ranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in

addition to parts and labor charges will be at the owner's expense. All returns require a Return

Authorization number.

7/22/2008

Gain

Provides control over the level of input signal that can be applied to the

internal signal buses of the main unit. Allows a way to balance the input lev-

els of various devices so that the main unit controls can be set to relatively

uniform or optimum levels.

Bass & Treble (Treb & Bass)

Provides separate controls for Bass and Treble cut and boost. The Bass control

affects frequencies below 00 Hz and Treble affects frequencies above 8 kHz.1

Clockwise rotation provides boost; counterclockwise rotation provides cut.

Center position provides no affect.

Gate - Threshold (Thresh)

Controls the minimum necessary input signal level to turn on the module’s

output and apply mute signal to the main unit's buses. Clockwise rotation

increases the necessary signal level required to produce output and mute

lower priority modules.

Gate - Duration (Dur)

Controls the amount of time the output and mute signal of the module

remains applied to the main unit’s buses after the input signal falls below the

required minimum signal level (set by the threshold control).

Ducking (Duck)

Controls the level of the output signal from the module when it has been

requested to mute/gate its’ output. The range is adjustable from no reduc-

tion in level to full muting of the output signal.

Connections

Uses standard RCA connectors to make connections to the module’s input.

The inputs are quasi-balanced to reduce the chance of ground loops while still

being compatible with unbalanced signal sources.

When assigned to separate buses, the "A" labeled input will feed signal to all

"A" labeled controls and output on the main unit. Likewise for the "B" labeled

controls.

Jumper Selections

Priority Level*

This module can respond to 4 different levels of priority.

Priority 1is the highest priority. It mutes modules with

lower priorities and is never muted. Priority 2 can be muted

by Priority modules and mutes modules set for 3 or 4.1

Priority 3 is muted by either Priority or 2 modules and1

mutes priority 4 modules. Priority 4 modules are muted by

all higher priority modules.

*The number of priority levels available is determined by the

amplifier in which the modules are used.

Bus Assignment

This module can be set to operate in stereo mode, where

input A audio is delivered only to the main unit’s A channel,

and likewise for the B input. Or, the module can be set to

combine the stereo into a mono signal and make it available

to all buses within the main unit.

Module Installation

1. Turn off all power to the unit.

2. Make all necessary jumper selections.

3. Position module in front of desired module bay

opening, making sure that the module is right-

side up.

4. Slide module on to card guide rails. Make sure

that both the top and bottom guides are

engaged.

5. Push the module in to the bay until the faceplate

contacts the unit’s chassis.

6. Use the two screws included to secure the mod-

ule to the unit.

Gating

Gating (turning off) of the module's output when insuffi-

cient audio is present at the input can be disabled.

Detection of audio for the purpose of muting lower priori-

ty modules is always active regardless of this jumper setting.

WARNING:

Turn off power to unit and make all jumper

selections before installing module in unit.

Product specificaties

Merk:	Bogen
Categorie:	Niet gecategoriseerd
Model:	SAX1R
Gewicht:	79 g
Stroomvoorziening:	24VDC
Frequentiebereik:	10 Hz - 40 kHz
Afmetingen (B x D x H):	25 x 76 x 76 mm