Blustream NPA70DA Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Blustream NPA70DA (19 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
NPA70DA
User Manual
RevA2_User_Manual_NPA70DA
DANTE(PoE) TCP/IP
CONTROL
TX RX
RS-232
T
TRG
S V
IR IN IR
5V 12V
R+ R- L+ L- 100V 70V COM
+ BRIDGED -
SPEAKER OUTPUT
4Ω
8Ω
70V
100V
NPA70DA
VOLUME
Dante Networked Power Amplier
MODE 1 MODE 2
NETWORK
24V 3.5A
NPA70DA USER MANUAL
www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|02
Surge Protection Device
Recommended
This product contains sensitive
electrical components that may be
damaged by electrical spikes, surges,
electric shock, lightning strikes, etc.
Use of surge protection systems is
highly recommended in order to
protect and extend the life of your
equipment.
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
Introduction 03
Features 03
Front Panel Description 04
Rear Panel Description 04
Speaker Connections 05
Audio Connections 05
Trigger Connection 06
IR Connection 06
Network Connections 06
Dante® Audio & Dante® Controller 07-08
Advanced Dante® Settings 08
Web GUI Control 09-13
Schematic 14
Telnet & RS-232 Control Port 15-16
Specifications 17
Package Contents 17
Maintenance 17
Acknowledgements 18
Certifications 18
NPA70DA USER MANUAL
Contact: support@blustream.com.au | | support@blustream-us.com support@blustream.co.uk 03
Our NPA70DA networked audio zone amplifier delivers advanced audio
integration within a commercial or residential AV installation.
The NPA70DA features a 2 x 35W digital amplifier (1 x 70W mono) or 70V / 100V
hi-level constant voltage output and Dante® audio integration.
The NPA70DA can be powered via PoE++ from a compatible network switch, or
locally should the switch not support PoE++. The unit also includes the ability
to lower the amplifier power output subject to PoE capabilities, support for
combined or independent LAN and Dante® connections, DSP with a 31 band
EQ, audio delay for lip sync correction, and control via front panel, IR, RS-232,
TCP/IP, web-GUI or 12V trigger.
Introduction
FEATURES:
• Advanced network audio amplifier with Dante® integration
• Supports 2 x 35W @ 4 / 8 ohm, 1 x 70W @ 4 / 8 ohm or 70 / 100V constant output for multiple speakers with longer
cable runs
• Supports power via PoE++ on Dante® LAN connection or local power supply*
• Dual network option - independent Dante® and LAN control ports, or combined to a single LAN
• 2ch Dante® / AES67 audio input
• DSP with 31 band EQ with +3dB/-10dB and audio delay
• Local 12V input trigger for automated power control
• Control via front panel, IR, RS-232 and IP
• Auto standby mode with signal sensing
• In-built web-GUI for setup and control
* Amp power limited when using PoE+


Product specificaties

Merk: Blustream
Categorie: Receiver
Model: NPA70DA

Heb je hulp nodig?

Als je hulp nodig hebt met Blustream NPA70DA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Blustream

Handleiding Receiver

Nieuwste handleidingen voor Receiver