Bluesound NODE 2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Bluesound NODE 2 (4 pagina's) in de categorie Mediaspeler. Deze handleiding was nuttig voor 76 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Wireless Streaming
Music Player
Owner’s Manual
Included Accessessories
Welcome to Bluesound, Hi-Fi for the Wi-Fi generation.
Bluesound transforms your local digital music library by putting the music of your life right at your fingertips.
The clutter of CDs is relegated to a previous era! Your smartphone, desktop or tablet running the Bluesound
App now controls your music.
Your Bluesound music system is also a sophisticated Internet streaming device that allows you to listen
to a wide range of Internet music service providers. Bluesound also provides access to music subscription
services featuring extensive catalogs of millions of songs streamed to you over the internet in real time.
TuneIn Radio makes every radio station in the world a local station via the magic of the internet.
To take full advantage of all these Bluesound capabilities requires a robust wired or wireless home network
and a reliable high speed Internet connection, provided by a DSL or Cable modem. Internet access must be
contracted and installed by your local Internet Service Provider. For remote areas there are satellite options
for high speed internet access.
Before signing on to a music subscription or cloud service we suggest that you review your Internet service
plan and be sure you have enough internet speed and bandwidth to provide uninterrupted streaming. Most
internet service providers offer multiple plans and can help you make the best choice.
For detailed instructions on how to control your Bluesound player, visit our website at : www.bluesound.com.
Stereo RCA to RCA Cable 230V AC Power Cord
3.5mm Stereo mini Plug to RCA Cable Ethernet Cable
120V AC Power Cord Mini Jack to Toslink Adaptor
STATUS INDICATOR
Below is a table of the LED blink codes and their corresponding descriptions.
LED BLINK CODE DESCRIPTION
Short blue ash, then red Powering up, rebooting the unit
Solid green Hotspot Mode
Flashing green Connecting to Network shares
Solid red Cannot boot; drive error
Red pulse No internet gateway
White pulse Software update available
Solid red Upgrade mode
Alternate flashing red and green Upgrading…
Flashing blue Mute mode
Solid white Indexing
Solid blue Connected to Network – ready to use with Bluesound App
Flashing red Factory reset in progress
3
1
5 6 7 8 13 14
109 12 1511
16
1
4
2
PLAY/PAUSE BUTTON : This button has multiple functions – a visual indicator of network connectivity and a PLAY/
PAUSE button. For a full listing of LED Blink Codes, please see #1 – Blink Codes. For an ungrouped Player, press
the button to Play and Pause the stream. If listening to an internet radio stream, the Pause function will work for 30
seconds. At this point, the buffer is full and the stream will Stop. When a Player is grouped, pressing the PLAY/PAUSE
button will Mute that Player while other Players continue the stream. The Player’s LED will flash blue when muted.
+, - (VOLUME) : Toggle either button to vary volume level. Volume level will not change if you press and hold either button.
(+) : Increase volume level
(-) : Decrease volume level
PREVIOUS TRACK/NEXT TRACK : These buttons can be used to go back to the previous track or skip to the
next track in your current playlist.
AUDIO OUT : Connect to the corresponding analog audio input of an amplifier, receiver or stereo system.
SUBW (SUBWOOFER) OUT : A Subwoofer can also be connected directly to the NODE 2. Connect SUBW OUT
to a powered (“active”) subwoofer.
COAX OUT : Using a coax cable (not provided), connect one end to the COAX OUT of the NODE 2 and the
other end to the corresponding coax input of compatible devices such as receivers, computer soundcards or
other digital processors.
OPTICAL OUT : Using a Digital Optical cable (not provided), connect one end to the OPTICAL OUT of the
NODE 2 and the other end to the corresponding digital audio input of compatible devices such as receivers,
computer soundcards or other digital processors.
OPTICAL IN/ANALOG IN : Using a 3.5mm Stereo Audio Cable (provided), connect one end to the Analog In
of the NODE 2 and the other end to the corresponding analog output of other compatible devices. The source
will show as an Analog Input in the Navigation Drawer of the Bluesound app. Using the 3.5mm Mini Jack to
Toslink adaptor (included with the NODE 2), a digital optical source can also be added. This will appear as Optical
Input in the Navigation Drawer.
TRIGGER OUT : A 12V DC signal is available using TRIGGER OUT. The 12V DC signal can be used to control or
activate other external devices equipped with a corresponding 12V trigger input using a 3.5mm mono audio cable.
IR IN : An infrared extender can be connected to allow for programmable learning remotes to control volume and
source selection when a NODE 2 is stored in a way that the front panel IR sensor is not visible.
LAN PORT : The LAN PORT connection can be used with the Ethernet cable provided. This is an optional
connection since the NODE 2 can be connected to the network through a Wi-Fi connection to your router. To
setup the NODE 2 using the LAN Port a Wired Ethernet connection is required. Using the Ethernet cable provided,
connect one end of the Ethernet cable to the LAN port of your wired Ethernet broadband router and the other end
to the NODE 2’s LAN port.
USB (TYPE A) : Connect a USB mass storage device to the USB input. Typical USB mass storage devices compatible
with the NODE 2 include portable flash memory devices and external hard drives (FAT32 formatted).
SERVICE : Use the SERVICE port in conjunction with USB (Type B Mini) to initially load firmware on the Player.
This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and
SERVICE control button.
AC MAINS INPUT : The NODE 2 comes supplied with two separate AC power cords. Select the AC power cord
appropriate for your region. Before connecting the plug to the wall outlet, connect firmly the other end of the AC
power cord to NODE 2’s AC Mains input socket. Never force the plug into a wall outlet. An adaptor may be necessary
in certain regions. Always disconnect the plug from the wall outlet first, before disconnecting the cable from the
NODE 2’s AC Mains input socket.
FRONT PANEL HEADPHONE JACK : A 3.5mm headphone jack is located on the front of the NODE 2.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16


Product specificaties

Merk: Bluesound
Categorie: Mediaspeler
Model: NODE 2
Kleur van het product: Wit
Ingebouwd display: Nee
Gewicht: 1120 g
Breedte: 220 mm
Diepte: 46 mm
Hoogte: 146 mm
LED-indicatoren: Ja
Bluetooth: Ja
Frequentie van processor: 1 MHz
Wi-Fi-standaarden: 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ondersteund audioformaat: AAC, AIFF, ALAC, FLAC, MP3, OGG, WAV, WMA
Ondersteunde videoformaten: Niet ondersteund
Ethernet LAN: Ja
Meegeleverde kabels: AC, LAN (RJ-45), RCA, TOSLINK Digital Optical
Geïntegreerde geheugenkaartlezer: Nee
Aantal USB 2.0-poorten: 2
Aantal Ethernet LAN (RJ-45)-poorten: 1
Volumeregeling: Digitaal
Hoofdtelefoonuitgangen: 1
Volledige HD: Nee
HDCP: Nee
Processor architectuur: Cortex-A9
Ondersteund beeldformaat: JPG
Opslagmedia-type: Niet beschikbaar
Audio (L,R) out: 1
Digitale audio, optische uitgang: 1
Type processor: Ja
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Temperatuur bij opslag: -10 - 50 °C
aptX-technologie: Ja
Totale opslagcapaciteit: 0 GB
Luchtvochtigheid bij opslag: 20 - 80 procent
Audio-uitgangskanalen: - kanalen
Signaal/ruis-verhouding: 110 dB
Digitale audio, coaxuitgang: 1
Internet radio: Ja
Internet radio services ondersteund: iHeartRadio
Totale harmonische vervorming (THD): 0.005 procent
Ingebouwde opslagmedia: Nee
Wifi: Ja
AC-ingangsspanning: 100-240 V
Bedrijfstemperatuur (T-T): 0 - 40 °C

Heb je hulp nodig?

Als je hulp nodig hebt met Bluesound NODE 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mediaspeler Bluesound

Handleiding Mediaspeler

Nieuwste handleidingen voor Mediaspeler