Blaupunkt XLf 200 AW Handleiding

Blaupunkt Subwoofer XLf 200 AW

Lees hieronder de 📖 handleiding in het Nederlandse voor Blaupunkt XLf 200 AW (5 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

VELOCITY POWER

ACTIVE SUBWOOFER

XLf 200 AW

Operating and Installation Instructions

Proper system planning is vital in order to maximize the

device’s performance and road safety. Plan your installa-

tion carefully to avoid compromising performance reli-

ability of the system. Consult an authorized Blaupunkt

dealer for installation or reparation. Read the manual

carefully before operating the device for the rst time.

Safety Notes

Ensure to follow below safety notes during installation

and wiring connection : -

•

Installation and Connection Instructions

•

Voltage Supply

•

Integrated Fuse

The integrated fuse in the device protects the output

voltage and the entire electrical system in case of

malfunction. Do not replace damaged fuse with higher

current.

Switching On/O

This device will automatically turn on if a music signal is

detected. The device will also automatically turn o if no

music signal is received.

CAUTIONS

Remote Control

Disclaimer

In no event shall Blaupunkt be liable for any direct,

indirect, punitive, incidental, special consequential

damages to property or life and whatsoever arising out

of or connected with the use or misuse of our products.

USA & CANADA: This product is not intended for sale in

the United States and Canada. If purchased in the U.S. or

Canada, this product is purchased on as-is basis. No

warranty, whether expressed or implied is provided in

the U.S. or Canada.

Recycling and Disposal

Do not dispose of your old unit in the

household trash!

Use the return and collection systems

available to dispose of the old device.

This manual may be updated from time to time without

any notice.

Ensure positions of the holes are nowhere near the

vehicle component to avoid any damage during

drilling.

Ensure cross section of the cable is no less than

2.5mm if the positive and negative cables are too

long.

Incorrect installation may result in malfunction of

the device or the car sound system.

Select a dry and well-ventilated location to install

the device.

The device must not be installed in overly exposed

location such on the rear shelf, rear seat etc.

The installation location must be suitable for screw

holes and have stable ground support.

Use the supplied power extension cable to connect

to the positive battery terminal.

Firmly and carefully connect the ground lead to a

bare metal point on the vehicle chassis.

The control of the device should be a two-channel

control, either via the preamplier outputs or the

loudspeaker, output of the car sound system.

A control solely via the right or left channel is also

possible since the low-frequency portion of the

music is generally identical on both channels.

GAIN

BASS BOOST

LPF

PHASE

WIRING DIAGRAM

Diagram 2 (Low Level Input -Speaker Input)

Use the supplied cable and wire harness to connect the outputs correctly by referring to Diagram 1 & Diagram 2.

Use only one of the audio inputs, otherwise, it may lead to audio interference.

Diagram 1 (High Level Input -Speaker Input)

With control via the High Level Inputs, rst the speaker harness will need to be spliced the wire side of the splitter.

Then connect the white wire to the left (+), white/ black wire to the left(-) (it can be identied whether the left or

right channel via the attached harness label), grey to the right (+), and grey/black to the right (-) corresponding

vehicles wires, and nally plug the supplied harness into the High-Level Inputs/power matching connector on the

amplier panel of the subwoofer.

With control via the Low Level Inputs (also referred to as RCA Inputs), connect the blue colour remote wire from

XLf 200 AW to the vehicle’s head unit so XLf 200 AW will turn on and o with systems.

Product specificaties

Merk:	Blaupunkt
Categorie:	Subwoofer
Model:	XLf 200 AW

Heb je hulp nodig?

Als je hulp nodig hebt met Blaupunkt XLf 200 AW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Subwoofer Blaupunkt

Blaupunkt XLc 200 A Handleiding

10 Mei 2023

Blaupunkt XLf 150 A Handleiding

27 April 2023

Blaupunkt GTr 110 A Handleiding

21 April 2023

Blaupunkt TW 1600.4 Handleiding

20 April 2023

Blaupunkt Txt 1500.4 Handleiding

23 Februari 2023

Blaupunkt GTr 130 A Handleiding

11 Februari 2023

Blaupunkt XLf 180 A Handleiding

11 Februari 2023

Blaupunkt XLc 170 A Handleiding

27 Januari 2023

Blaupunkt GTr 100 A Handleiding

25 Januari 2023

Blaupunkt GBW120 Handleiding

23 Januari 2023

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Pioneer TS-A25S4 Handleiding

13 December 2024

Pioneer TS-A30S4 Handleiding

13 December 2024

Pioneer TS-A120S4E Handleiding

13 December 2024

JBL Power P1022 Handleiding

12 December 2024

JBL Power P1222 Handleiding

12 December 2024

ButtKicker BK-LFE Handleiding

10 December 2024

Infinity TSS-SUB750 Handleiding

9 December 2024

Infinity TSS-SUB4000 Handleiding

9 December 2024

Infinity Reference SUB R12 Handleiding

9 December 2024

AudioSource PSW110 Handleiding

9 December 2024