Blaupunkt GTr 100 A Handleiding

Blaupunkt Subwoofer GTr 100 A

Lees hieronder de 📖 handleiding in het Nederlandse voor Blaupunkt GTr 100 A (7 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
GTr 100 A
ACTIVE SUBWOOFER
Enjo
Operating and Installation Instructions
y it.
INTRODUCTION
Proper system planning is vital in order to
maximize the device’s performance and road
safety. Plan your installation carefully to avoid
compromising performance reliability of the
system. Consult an authorized Blaupunkt dealer
for installation or reparation. Read the manual
carefully before operating the device for the
rst time.
Safety Notes
Ensure to follow below safety notes during
installation and wiring connection : -
•
•
•
Installation and Connection Instructions
•
•
•
Intergrated Fuse
•
Switching On/O
•
Recycle and Disposal
Disconnect the negative terminal of the
battery. Refer to the safety notes of vehicle
manufacturer.
Ensure positions of the holes are nowhere
near the vehicle component to avoid any
damage during drilling.
Incorrect installation may result in malfunc-
tion of the device or the car sound system.
Select a dry and well-ventilated location to
install the device.
The device must not be installed on the rear
shelf, rear seats or exposed locations.
The installation location must be suitable for
screw holes and have stable ground support.
The integrated fuse in the device protects
the output voltage and the entire electrical
system in case of malfunction. Do not replace
damaged fuse with higher current.
This device will automatically turn on if audio
signal is detected. The device will also auto-
matically turn o if audio signal is received.
Please dispose responsibly.
Remote Control
1
2
3
4
5
6
Disclaimer
•
1. Power Indicator
2. Gain Adjustment
3. Low Pass Filter Adjustment
4. Phase Selector
Set the GAIN to 200mV (Min), PHASE to
NORM., LOW PASS FILTER to Center before
turning on the device.
Set the Bass/Treble of head unit to zero. Set
volume to lower level.
Gradually increase GAIN until the desired
sound eect is achieved or until the sound
distribution in the vehicle is even.
Avoid setting volume of the head unit and
GAIN too high to prevent sound distortion.
Ensure speakers are functioning well to avoid
sound distortion too. Then adjust the LOW
PASS FILTER (L.P.F.) to the desired frequency.
Changing the LPF will change the sound
output of the subwoofer. Continue to adjust
GAIN, LPF and volume until the desired
setting is found.
Play the music from the head unit while
sitting at the driver and switch between
NORM and REV to select the desired sound
output setting. The ideal PHASE is subjective
and varies from one vehicle to another,
depending on the location of the device and
the acoustic characteristics of the vehicle
interior.
In no event shall Blaupunkt be liable for any
direct, indirect, punitive, incidental, special
consequential damages, to property or life,
improper storage, whatsoever arising out of
or connected with the use or misuse of our
products.
1
2
INTRODUCTION
• USA & CANADA : Product not intended for
sale in the United States and Canada. If
purchased in the U.S. or Canada, this product
is purchased as-is. No warranty, express or
implied is provided in the U.S. and Canada.
2


Product specificaties

Merk: Blaupunkt
Categorie: Subwoofer
Model: GTr 100 A

Heb je hulp nodig?

Als je hulp nodig hebt met Blaupunkt GTr 100 A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Blaupunkt

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer