Blaupunkt GTr 10150 A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Blaupunkt GTr 10150 A (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Operating and Installation Instructions
ACTIVE SUBWOOFER
GTr 10150 A
Remote Control
Disclaimer
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time
without any notice.
A control solely via the right or left channel is
also possible since the low-frequency portion
of the music is generally identical on both
channels.
In no event shall Blaupunkt be liable for any
direct, indirect, punitive, incidental, special
consequential damages, to property or life,
improper storage, whatsoever arising out of
or connected with the use or misuse of our
products.
USA & CANADA : Product not intended for sale
in the United States and Canada. If purchased
in the U.S. or Canada, this product is pur-
chased as-is. No warranty, express or implied is
provided in the U.S. and Canada.
Proper system planning is vital in order to max-
imize the devices performance and road safety.
Plan your installation carefully to avoid compro-
mising performance reliability of the system.
Consult an authorized Blaupunkt dealer for instal-
lation or reparation. Read the manual carefully
before operating the device for the rst time.
Safety Notes
Ensure to follow below safety notes during instal-
lation and wiring connection : -
Installation and Connection Instructions
Intergrated Fuse
Switching On/O
Voltage Supply
1
INTRODUCTION
Disconnect the negative terminal of the
battery. Refer to the safety notes of vehicle
manufacturer.
Ensure positions of the holes are nowhere
near the vehicle component to avoid any
damage during drilling.
Ensure cross section of the cable is no less
than 2.5mm if the positive and negative
cables are too long.
Incorrect installation may result in malfunc-
tion of the device or the car sound system.
Select a dry and well-ventilated location to
install the device.
The device must not be installed on the rear
shelf, rear seats or exposed locations.
The installation location must be suitable for
screw holes and have stable ground support.
The integrated fuse in the device protects
the output voltage and the entire electrical
system in case of malfunction. Do not replace
damaged fuse with higher current.
This device will automatically turn on if audio
signal is detected. The device will also auto-
matically turn o if audio signal is received.
Use the supplied power extension cable to
connect to the positive battery terminal.
Firmly and carefully connect the ground lead
to a bare metal point on the vehicle chassis.
The control of the device should be a
two-channel control, either via the preampli-
er output of the car sound system.
Turn the sub level knob to adjust the volume
to the desired level.
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Power Light
Phase (0~ 180)
Low Pass (50Hz~ 150Hz)
Bass Boost (0 ~ +12dB)
Input Volts (6V ~ 0.15V)
Remote Control Input
Low Level Input
High Level Input
Fuse
Ground (Chasis)
Remote
+12V Battery
Auto Power On
Protection LED Light
FUNCTIONS CONTROLLING DIAGRAM
1 2 3 4 5 6 7 8 9 10
13 111214
INSTALLATION


Product specificaties

Merk: Blaupunkt
Categorie: Niet gecategoriseerd
Model: GTr 10150 A

Heb je hulp nodig?

Als je hulp nodig hebt met Blaupunkt GTr 10150 A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Blaupunkt

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd