Blackburn Chamber Tubeless Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Blackburn Chamber Tubeless (2 pagina's) in de categorie Pomp. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
CHAMBER TUBELESS™
Floor pump
Part# 7085522
31.8mm stem clamp
15.75" riser bars
Alloy pump mode lever
OPERATING IN PUMP/RELEASE MODE
Operate pump in “Pump/Release” mode with lever
locked in vertical position (FIGURE A). This will allow
air to bypass reservoir for more efficient
direct-to-tire pumping.
T6063 Alloy barrel
Hose pivot
Anyvalve™ pump head
160 PSI, top-mounted gauge
Air bleed button
Stamped metal base
Extra long 4ft hose
Note: Air bleed does not work on Dunlop valves.
2. PUMP
1. CHARGE
3. RELEASE
TO USE IN CHARGE MODE AND SEAT TIRE
1. Rotate lever up 90° to “CHARGE” mode with lever in
horizontal orientation. Insure it locks in place.
2. Operate pump and charge reservoir to 160psi. (Figure B)
3. Return lever back to “Pump/Release” mode to
instantly release tire bead seating pressure.
SHORT PRESTA/
DUNLOP
LONG PRESTA/
SCHRADER
Air bleed
>20mm LONG
PRESTA
<20mm SHORT
PRESTA
ANYVALVE PUMP HEAD WITH AIR BLEED BUTTON
WARNING: DO NOT CHARGE YOUR PUMP PAST 160PSI AS INDICATED ON THE GAUGE. NEVER OVERINFLATE YOUR TIRE. SEE SIDEWALL FOR MANUFACTURER
RECOMMENDED TIRE INFLATION PSI. KEEP FINGERS CLEAR OF TIRE WHEN SEATING BEAD.
B.
A.
Customer Service: 1-800-456-2355
Blackburndesign.com
Printed in Taiwan
CHAMBER TUBELESS
™
Floor pump
√
FIGURE 1A FIGURE 1B
√
FIGURE 2A FIGURE 2B
FIGURE 3
FIGURE 4
FIGURE 5
FOUR (4) HEX BOLTS
Visit us at blackburndesign.com for product updates.
WHEN SEATING AND INFLATING TUBELESS TIRES
Carefully follow the tire manufacturer’s recommended installation instructions. When installing new valve
stems, tighten the stem completely as to ensure a leak free seal. If installation is correct, the bead of the
tire will audibly pop into the rim as shown in Figure 3 and the tire will inflate. Use the pump to dial in your
desired pressure. Use the air bleed button on the ANYVALVE pump head to release air if necessary.
NOTE: There are two common reasons for inflation and bead seal failure.
1. The tire was not properly installed. See figure 1A for a correct tire installation.
2. The valve stem was not tightened completely. See figure 2A for a correct valve stem installation.
If inflation fails, deflate the tire and check for correct installation of the rim and valve. Once correct
installation is confirmed, follow the inflation sequence again to correctly install and inflate the tire.
USING THE CONDENSATION DRAIN (FIGURE 4)
It is recommended that you drain the water periodically to prevent water from collecting inside the chamber.
The drain valve is located on the base of the pump. Use a flathead screwdriver to loosen the valve. (FIGURE 4)
NOTE: The valve does not completely remove from the pump. Make sure the valve is completely
locked tight after you drain the water. Air leak may happen if the valve is not locked tight
.
USE YOUR OWN 31.8MM HANDLEBARS
This pump can be customized using any 31.8mm handlebar and the grips of your choice. To install, remove the
four 3mm hex bolts from the stem clamp (FIGURE 5). Replace the bars. Reinstall the hex bolts and tighten securely.
Customer Service: 1-800-456-2355
Blackburndesign.com
Printed in Taiwan
Product specificaties
| Merk: | Blackburn |
| Categorie: | Pomp |
| Model: | Chamber Tubeless |
Heb je hulp nodig?
Als je hulp nodig hebt met Blackburn Chamber Tubeless stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Pomp Blackburn
16 Juli 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
Handleiding Pomp
- Pomp Karcher
- Pomp Nefit
- Pomp Quigg
- Pomp Siemens
- Pomp Vaillant
- Pomp Al-ko
- Pomp Astralpool
- Pomp Bartscher
- Pomp Batavia
- Pomp Bestway
- Pomp Blumfeldt
- Pomp Bulex
- Pomp Danfoss
- Pomp Eheim
- Pomp Einhell
- Pomp Eufab
- Pomp Eurom
- Pomp Ferroli
- Pomp Fluke
- Pomp Fuxtec
- Pomp Gardena
- Pomp Gardenline
- Pomp Generac
- Pomp Germania
- Pomp GRE
- Pomp Gude
- Pomp Hayward
- Pomp Hozelock
- Pomp Husqvarna
- Pomp Hyundai
- Pomp Lavorwash
- Pomp Makita
- Pomp Melinera
- Pomp Metabo
- Pomp Michelin
- Pomp Milwaukee
- Pomp Nibe
- Pomp Parkside
- Pomp Plantiflor
- Pomp POLARIS
- Pomp Powerfix
- Pomp Powerplus
- Pomp Ryobi
- Pomp Sanibroyeur
- Pomp Scheppach
- Pomp Silvercrest
- Pomp Technaxx
- Pomp Toolcraft
- Pomp Trotec
- Pomp Ultimate Speed
- Pomp Velda
- Pomp Vetus
- Pomp Vivaria
- Pomp Vonroc
- Pomp Westfalia
- Pomp WHALE
- Pomp Worx
- Pomp Zipper
- Pomp Zodiac
- Pomp Oase
- Pomp OKAY
- Pomp Osram
- Pomp Ozito
- Pomp Crivit
- Pomp Black And Decker
- Pomp Wetelux
- Pomp Cannondale
- Pomp Fluval
- Pomp Sicce
- Pomp Simpson
- Pomp Aerotec
- Pomp Tacklife
- Pomp Fieldmann
- Pomp Lezyne
- Pomp Topeak
- Pomp Zéfal
- Pomp Coleman
- Pomp Outwell
- Pomp Biltema
- Pomp Comet
- Pomp Sun Joe
- Pomp Maruyama
- Pomp Little Giant
- Pomp MSW
- Pomp ESPA
- Pomp Verto
- Pomp Enermax
- Pomp Testo
- Pomp FIAP
- Pomp Neptun
- Pomp Pontec
- Pomp Alpha Tools
- Pomp Hazet
- Pomp Jabsco
- Pomp SKS
- Pomp For_Q
- Pomp Abac
- Pomp Waldbeck
- Pomp Pedrollo
- Pomp Park Tool
- Pomp Panduit
- Pomp DAB
- Pomp Anova
- Pomp Ubbink
- Pomp Esotec
- Pomp Wayne
- Pomp T.I.P.
- Pomp Rule
- Pomp JANDY
- Pomp Elpumps
- Pomp Hollex
- Pomp B-Air
- Pomp Baracuda
- Pomp Lifan
- Pomp Monzana
- Pomp Liberty Pumps
- Pomp BluGarda
- Pomp Grundfos
- Pomp Madimack
- Pomp Sauermann
- Pomp Eco-Flo
- Pomp Nowax
- Pomp Zoeller
- Pomp Superior Pump
- Pomp SHURflo
- Pomp EvoHeat
- Pomp Barwig
- Pomp Ribimex
- Pomp Ebara
- Pomp Perlick
- Pomp Basement Watchdog
- Pomp Ergotools Pattfield
- Pomp Zehnder Pumpen
- Pomp SANDPIPER
- Pomp Heissner
- Pomp OSIP
- Pomp Franklin Electric
Nieuwste handleidingen voor Pomp
4 December 2024
4 December 2024
30 November 2024
30 November 2024
23 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
18 November 2024