Black Decker BCF611C Handleiding
Black Decker
Schroevendraaier
BCF611C
Lees hieronder de đ handleiding in het Nederlandse voor Black Decker BCF611C (60 pagina's) in de categorie Schroevendraaier. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/60
www.blackanddecker.eu
2
3
6
9
8 10
14
5
7
BCF611C
23
7
5
5a
6
A
2
E
6
7
9
8
3
B
C
1
4
D
Intended use
Your BLACK+DECKERTM BCF611C screwdriver has been
designed for screwdriving applications. This tool is intended
for consumer use only.
Safety instructions
General power tool safety warnings
@ Warning! Read all safety warnings,
î instructions,îillustrationsîandîspeciîcations
provided with this power tool. Failure to follow the warnings
and instructions listed below may result in electric shock, îżre
and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery oper-
ated (cordless) power tool.
3
ENGLISH
(Original instructions)
23
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
suchîasîinîtheîpresenceîofîîammableîliquids,îgasesî
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodiîżed plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power tool while you are tired or under
theîinîuenceîofîdrugs,îalcoholîorîmedication. A
moment of inattention while operating power tools may
result in serious personal injury.
b.î Useîpersonalîprotectiveîequipment.îAlwaysîwearîeye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your îżnger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
h.î Doînotîletîfamiliarityîgainedîfromîfrequentîuseîof
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tools operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Product specificaties
| Merk: | Black Decker |
| Categorie: | Schroevendraaier |
| Model: | BCF611C |
Heb je hulp nodig?
Als je hulp nodig hebt met Black Decker BCF611C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroevendraaier Black Decker
28 Februari 2023
28 Februari 2023
Handleiding Schroevendraaier
- Schroevendraaier Bosch
- Schroevendraaier Panasonic
- Schroevendraaier AEG
- Schroevendraaier DeWalt
- Schroevendraaier Batavia
- Schroevendraaier Bort
- Schroevendraaier Brandson
- Schroevendraaier Defort
- Schroevendraaier Dremel
- Schroevendraaier Einhell
- Schroevendraaier Ferm
- Schroevendraaier Ferrex
- Schroevendraaier Hikoki
- Schroevendraaier Hyundai
- Schroevendraaier Ideen Welt
- Schroevendraaier Kress
- Schroevendraaier Max
- Schroevendraaier Parkside
- Schroevendraaier Powerfix
- Schroevendraaier Powerplus
- Schroevendraaier Scheppach
- Schroevendraaier Sparky
- Schroevendraaier Stomer
- Schroevendraaier Triton
- Schroevendraaier Vonroc
- Schroevendraaier Worx
- Schroevendraaier Probuilder
- Schroevendraaier Toolson
Nieuwste handleidingen voor Schroevendraaier
10 December 2023
17 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
25 September 2023
25 September 2023
20 Augustus 2023