Black Decker 2038 Handleiding

Black Decker Schroefmachine 2038

Lees hieronder de 📖 handleiding in het Nederlandse voor Black Decker 2038 (9 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

Double Insulated

Drywall Screwdrivers

Instruction

manual

The Model and Serial No. plate is located on the main

housing of the tool. Record these numbers in the

spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

IMPORTANT

Please make certain that the person who

is to use this equipment carefully reads

and understands these instructions before

starting operations.

Part No. 901014 (012)

ESPAÑOL: PÁGINA 9

FRANÇAISE : PAGE 19

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

MODEL 2640

(10 Ft. Cord)

MODEL 2650

(50 Ft. Cord)

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using electric tools, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and personal injury,

including the following:

WARNING: SOME DUST CREATED BY POWER SANDING, SAWING,

GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES

contains chemicals known to cause cancer, birth defects or other

reproductive harm. Some examples of these chemicals are:

· lead from lead-based paints,

· crystalline silica from bricks and cement and other masonry products, and

· arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those dust

masks that are specially designed to filter out microscopic particles.

READ AND FOLLOW ALL INSTRUCTIONS.

There are certain applications for which this tool was designed. Porter-Cable

strongly recommends that this tool NOT be modified and/or used for any

application other than for which it was designed. If you have any questions

relative to its application DO NOT use the tool until you have written Porter-

Cable and we have advised you.

Technical Service Manager

Porter-Cable Corporation

4825 Highway 45 North

Jackson, TN 38305

POLARIZED PLUGS: To reduce the risk of electric shock, this equipment has

a polarized plug (one blade is wider than the other). This plug will fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified electrician to install the proper

outlet. Do not change the plug in any way.

1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.

2. AVOID DANGEROUS ENVIRONMENT. Don’t expose power tools to rain.

Don’t use power tools in damp or wet locations. Keep area well lit. Avoid

chemical or corrosive environment. Do not use tool in presence of flammable

liquids or gases.

3. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with

grounded surfaces. For example: pipes, radiators, ranges, refrigerator

enclosures.

4. KEEP CHILDREN AWAY. Do not let visitors contact tool or extension

cord. All visitors should be kept away from work area.

5. STORE IDLE TOOLS. When not in use, tools should be stored in dry, and

high or locked-up place – out of reach of children.

6. DON’T FORCE TOOL. It will do the job better and safer at the rate for

which it was intended.

7. USE RIGHT TOOL. Don’t force small tool or attachment to do the job of

a heavy duty tool. Don’t use tool for purpose not intended – for example – do

not use a circular saw for cutting tree limbs or logs.

8. DRESS PROPERLY. Do not wear loose clothing or jewelry. Loose

clothing, draw strings and jewelry can be caught in moving parts. Rubber

gloves and non-skid footwear are recommended when working outdoors.

Wear protective hair covering to contain long hair.

9. USE SAFETY GLASSES. Wear safety glasses or goggles while operating

power tools. Also face or dust mask if operation creates dust. All persons in

the area where power tools are being operated should also wear safety

glasses and face or dust mask.

10. DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect

from receptacle. Keep cord from heat, oil, and sharp edges. Have damaged

or worn power cord and strain reliever replaced immediately. DO NOT

ATTEMPT TO REPAIR POWER CORD.

11. SECURE WORK. Use clamps or a vise to hold work. It’s safer than using

your hand and it frees both hands to operate tool.

12. DON’T OVERREACH. Keep proper footing and balance at all times.

13. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better

and safer performance. Follow instructions for lubricating and changing

accessories. Inspect tool cords periodically and if damaged, have repaired by

authorized service facility. Inspect extension cords periodically and replace if

damaged. Have all worn, broken or lost parts replaced immediately. Keep

handles dry, clean and free from oil and grease.

14. DISCONNECT TOOLS when not in use, before servicing, and when

changing accessories such as blades, bits, cutters, etc.

15. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking

to see that keys and adjusting wrenches are removed from the tool before

turning it on.

16. AVOID UNINTENTIONAL STARTING. Do not carry a plugged-in tool with

finger on switch. Be sure switch is off when plugging in. Keep hands, body and

clothing clear of blades, bits, cutters, etc. when plugging in the tool.

17. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use

only extension cords marked “Suitable for use with outdoor appliances – store

indoors when not in use.”

18. STAY ALERT. Watch what you are doing. Use common sense. Do not

operate tool when you are tired or while under the influence of medication,

alcohol or drugs.

19. CHECK DAMAGED PARTS. Before further use of the tool, a guard or

other part that is damaged should be carefully checked to determine that it

will operate properly and perform its intended function. Check for alignment

of moving parts, binding of moving parts, breakage of parts, mounting, and

any other conditions that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced by an authorized service

center unless otherwise indicated elsewhere in this instruction manual. Have

defective switches replaced by authorized service center. Do not use tool if

switch does not turn it on and off.

20. WEAR EAR PROTECTION to safeguard against possible hearing loss.

SAVE THESE INSTRUCTIONS

REPLACEMENT PARTS

When servicing use only identical replacement parts.

ADDITIONAL SAFETY RULES FOR SCREWDRIVERS

1. VERIFY direction of rotation of screwdriver is correct for operation to be

performed before starting tool.

2. DO NOT attempt to change direction of rotation while switch is “ON”. To

do so may damage interlock feature built into switch. Be sure switch is “OFF”

and motor has completely stopped.

Product specificaties

Merk:	Black Decker
Categorie:	Schroefmachine
Model:	2038

Heb je hulp nodig?

Als je hulp nodig hebt met Black Decker 2038 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Schroefmachine Black Decker

Black Decker 2038 Handleiding

8 December 2024

Handleiding Schroefmachine

Nieuwste handleidingen voor Schroefmachine

Hilti SID 2‑A12 Handleiding

9 December 2024

Silverline 248250 Handleiding

5 December 2024

Bavaria BSD 3,6/1 Li Handleiding

5 December 2024

Hilti HRD-H Handleiding

5 December 2024

Einhell RT-SD 4,8 Handleiding

4 December 2024

Einhell BT-SD 3,6/2 Li Handleiding

4 December 2024

Einhell BT-SD 4,8 Handleiding

4 December 2024

Einhell BT-CD 14,4 Li Handleiding

4 December 2024

Einhell BT-CD 18/1 Li Handleiding

4 December 2024

Fein ASCD 18-300 W2 Select Handleiding

30 November 2024