Black Box LE180A Handleiding

Black Box Niet gecategoriseerd LE180A

Lees hieronder de 📖 handleiding in het Nederlandse voor Black Box LE180A (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

LE180A 10Base-T Transceiver

•Stand-Alone model

• Attached Unit Interface (AUI) to

Ethernet RJ-45 connectors

• No external power requirement

NETWORK SERVICES

General Description . . . . . . .2

Connectors & Cables . . . . . . .3

Installation . . . . . . . . . . . . . .6

Operations . . . . . . . . . . . . . .8

Technical Specifications . . . .9

Cable Specifications . . . . . .10

Troubleshooting . . . . . . . . .10

The LE180A transceiver is a media access unit

(MAU) that connects the AUI port of data

terminal equipment, repeaters, or other

network devices either directly or through an

AUI cable to an Ethernet 10BASE-T device. The Ethernet device is connected to the

transceiver through an unshielded or shielded twisted-pair copper cable with RJ-45

connector ends.

Workstation

Black Box

Transceiver

Black Box

Transceiver

Workstation

10-Base-T Hub

Black Box

Transceiver

HUB with AUI Port

Various System Configurations

Figure 1 shows various examples of transceiver system configurations.

Figure 1: Transceiver System Configurations

LE180A

2Black Box Network Services, 724-746-550, www.blackbox.com

General Description

The LE180A IEEE802.3 compliant Ethernet transceiver uses 10Mbps Ethernet

CSMA/CD protocol to provide a connection interface to 10Base-T Ethernet unshielded

twisted-pair (UTP) cables. The transceiver connects to the AUI connector of an

Ethernet device via standard AUI cable.

Figure 2: shows the front and rear panels of the LE180A transceiver.

Figure 2: LE180A Transceiver Front and Rear Panels

Dimensions

Figure 3 shows the LE180A dimensions.

Figure 3: LE180A Dimensions

3-Positio

Switch

AUI Connector

Rear

RJ-45 Connector

Front

4 LEDs

3.141

1.757"

0.812"

Black Box Network Services, 724-746-550, www.blackbox.com 3

LE180A

LE180A Features

• Provides a complete interface of the AUI to Ethernet UTP cable.

• Supports 10Mbps data transfer rates.

• Supports Carrier Sense Multiple Access/Collision Detection contention(CSMA/CD)

protocol.

• Drives UTP cable segments up to 100 meters (328ft).

• Supports selectable link and SQE test functions.

• Supports direct connections to host AUI ports.

• Detects and corrects reverse polarity on the receiving pair of UTP cables.

• Provides four LEDs: Transmit (TX), Receive (RX), Collision, and Status.

Connectors and Cables

LE180A AUI male connector

AUI D-sub 15-pin male connector accommodates AUI drop cables .(50 meters max.)

The AUI connector is used to connect the transceiver to the AUI port of an Ethernet

device such as an Ethernet MAC controller, a repeater, or a hub via an AUI drop cable.

The AUI connector is shown in Figure 4. The AUI male connector pin assignments are

show in Table 1.

Figure 4: LE180A AUI Male Connector Pin Assignments

D-Sub 15-pin Male AUI Connector

915

LE180A

4Black Box Network Services, 724-746-550, www.blackbox.com

Connectors & Cables -- Continued

AUI connector -- continued

Pin Name Pairs Use

3 DO + Transmit Data Out +

10 DO - Pair Data Out -

11 DO S Data Out Shield

5 DI + Receive Data In +

12 DI - Pair Data In -

4 DI S Data In Shield

7 CO + Option Control Out +

15 CO - Pair Control Out -

8 CO S Control Shield

2 CI + Collision Control In +

9 CI - Pair Control In -

1 CI S Control Shield

6 VC Power Voltage Common

13 VP Pair Voltage Plus

14 VS Voltage Shield

UTP cable (RJ-45 connector)

The 10Base-T, RJ-45 out jack is used to connect a 10Base-T Ethernet device via a

2-pair UTP cable. The length of the UTP(Use category 3, 4, or 5 UTP cable.)

cable can be up to 100m . (328ft)

The RJ-45 connector pin configuration is shown in Figure 5. The pin assignments

are show in the Table 2..

34 5 6

Figure 5: RJ-45 Connector Pin Configuration

Table 1: AUI Male Connector Pinouts

Black Box Network Services, 724-746-550, www.blackbox.com 5

Connectors & Cables -- continued

UTP cable (RJ-45 connector) -- continued

LE180A

Pin Out Jack Assignments

1 Outgoing Data 1 (+)

2 Outgoing Data 2 (-)

3 Incoming Data 1 (+)

4 Not connected

5 Not connected

6 Incoming Data 2 (-)

7 Not connected

8 Not connected

Wiring schemes for UTP cable and devices

How to install the UTP cable is determined by the characteristics of the 10Base-T UTP

port of the other device. The following shows some pinning examples:

UTP Cable Pin Wiring

10Base-T Device InputTransceiver

Pin Pin

10Base-T Output Jack

Computer 10Base-T Port

Transceiver

Transceiver

Pin Pin

Note: The device 10Base-T output jack is normally used to connect to another

10Base-T device. The vendor's 10Base-T device sometimes provides a

crossover option to set the jack as an input jack for connecting to a 10Base-T

Ethernet station.

Table 2: RJ-45 Pin Assignments

Product specificaties

Merk:	Black Box
Categorie:	Niet gecategoriseerd
Model:	LE180A
Gewicht:	100 g
Breedte:	20 mm
Diepte:	79 mm
Hoogte:	46 mm
Gewicht verpakking:	240 g
Breedte verpakking:	133.35 mm
Diepte verpakking:	203.2 mm
Hoogte verpakking:	57.15 mm
Aantal Ethernet LAN (RJ-45)-poorten:	1
Duurzaamheidscertificaten:	RoHS
Netwerkstandaard:	IEEE 802.3
Temperatuur bij opslag:	-20 - 85 °C
Golflengte:	- nm
Hoogte, in bedrijf:	0 - 3000 m
Maximale overdrachtssnelheid van gegevens:	10 Mbit/s
Maximaal bereik:	- m
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal producten inbegrepen:	1 stuk(s)